In conducting the research on Material Science two composite materials ultra high molecular weight polyethylene (UHMWPE) powder and aluminum oxide (Al2O3) powder were formulated by hot compression molding process. The formulated materials demonstrated good mechanical properties and high wear resistance properties. Based on the studies the Al2O3 grade selected was Al2O3 HTM 30 harboring mixed uneven powder particle sizes ranging from 2 to 5 microns (μm) and selected proportion of Al2O3 alloy mixed for improving mechanical and wear resistance properties of the UHMWPE composite material was the UHMWPE+Al2O3 HTM 30 at a ratio of 95:5%. When considering both material properties and cost effectiveness in the impact test 2-5 μm Al2O3 HTM carried the higher impact strength than other aluminum oxide grades with the values up to 586.8 J/m at a ratio of 5% aluminum oxide. The hardness test of the 2-5 μm UHMWPE+ Al2O3 HTM delivered the hardness at 58.8 using the standard durometer. The tensile test values consisted of Yield Strength Ultimate Tensile Strength Breaking Strength Elongation at Break and Modulus of elasticity equal to 20.52 MPa 29.96 MPa 22.83 MPa 265.8% and 784.46 MPa respectively.

The objectives of this research are to study the rate of deterioration of tyre friction coefficient and investigate the quality of new and old tyres that are currently in use. A set of the rolling resistance testing was designed and set up to work with the single dynamometer according to speed 80 km/h tire load 4660 N and inflation pressure 30 psi. There were three tire samples new tire one year used tire and two year used tire to find the rolling resistance coefficients. The finding shows that the rolling resistance was inverse variation with tire aging. For instance the new tire (1st sample) had the highest rolling resistance on the other hand the two year used tire (3th sample) had the lowest rolling resistance. Moreover the rolling resistance coefficients were inverses variation with tire aging. Besides the one year used tire had the average of the decreasing rate of the rolling resistance coefficient at 0.03689 N/kN per a week while the two year had the average of the decreasing rate of the rolling resistance coefficient at 0.03671 N/kN per a week. Furthermore the result also revealed that the rolling resistance coefficients nonlinearly decreased comparing to the tire aging.

The objectives of this research were to develop of transmission line calculation program based on usage and frequency consisting of the two-wire transmission line twisted pair transmission line and coaxial transmission line. The program was developed in the form of graphical user interface in Malta. The developing and testing results found that the program was correctly capable to calculate capacity conductance inductance resistance and impedance for each transmission line usage and frequency. The results from the program with black box testing by five experts and twenty system users found the average and the standard deviation of results form computer experts were 4.04 and 0.36 respectively while those of results form the system users were 3.88 and 0.48 respectively. Conclusion it showed that the efficiency of the calculation program was a high level and can be used as a teaching and learning as well.

This research is to study and develop natural pulp materials for packaging. This is the agricultural waste. To benefit commercially To build capacity and capability in economic development and environmental conservation Is the creation of packaging work Formed in sheets and shapes using natural materials such as mulberry paper pineapple paper. And banana paper Then design and create the packaging. To test the properties. According to the standard packaging. They also sought satisfaction in the form and use of natural pulp materials. Include the packaging according to the case study. Research indicates that When developing pulp quality The banana paper can not be printed. Can print lines. But screen printing is not suitable for banana paper. Foil printing case when mulberry paper and pineapple paper Foil printing Printing lines Can be done well on mulberry paper and pineapple paper. Death images can be printed on all three types of paper but the screen is not good. Sealing material from natural pulp onto corrugated paper. From the test it was found that the amount of adhesive that was suitable for sealing was between 20-30 mg. If the adhesive was less than 20 milligrams only mulberry paper was sealed. The amount of glue at 50 milligrams is the amount of glue is too high causing all three types of paper to rot. Because of the adsorption of glue to the pulp. Packaging material from natural pulp. Fold of banana paper that does not pass the test. The banana paper is high in strength. When folding the packaging causes the pulp to split along the crease. Can not be molded. Evaluation of the satisfaction with the form and use of packaging materials from natural pulp. It was found that the average value of paper pulp suitable for packaging materials from natural pulp was the most agreeable paper. Secondly paper shreds are very popular and the last one is banana paper. Moderate agreement

This research is the study and design of the physical environment in response to applications for the elderly: a case study to improve the physical environment of the Center for Social Welfare Development elderly. Pathum Thani This study is to improve the physical environment of the Social Welfare Development Center for the elderly. Pathum Thani The benefits in terms of public education and find a style that suits the physical environment for the elderly which has a lot of current. The standard test for standards in the design of the physical environment in response to applications for the elderly. The study and design of the physical environment of the Social Welfare Development Center for the elderly. Pathumthani interview from design professionals. Concluded in the production and design of the model the researchers examined the experts as appropriate. The researcher has taken the form of physical environment of the area for correction. Then the residents living in the questionnaire about the usage patterns of 200 people which is as follows. The front living An average of 4.85 more convenience average of 4.55 more security average is 4.75 the design average is 4.95 the highest overall satisfaction is at the highest level. Then test the furniture Found that the test kit furniture The tests of static force acting on the seat. And static force acting on the backrest. In the qualifying test. Testing criteria of the static pressure exerted on the cantilever side and the wing stays static head. In the qualifying test. The tests of static force acts pressing down armrest. In the qualifying test. The tests of force exerted on the toggle switch and the force acting on the seat backrest. In the qualifying test. The force exerted on the test criteria. In passing the test Testing criteria regarding the impact on the seat cushion and the armrest. In the qualifying test. Testing criteria for lifting the one side and then released into freedom. In the qualifying test.