This research is presented by the designing and constructing test package that are divided into three types; the liquid insulator solid insulator and gas insulator. These materials are provided by in country in order to construct the test package for the results of expected to have at least error. This leads to reliability and validity in this study. The design of the liquid insulator of test package was conducted by the standard IEC 156 in which the material tested used oil transformer. Additionally its solid insulation was the range of catching objects and adjusting using the sheet of bakelite. Furthermore its gas insulation used acrylic was consisted of gas inside oxygen of pressure at 2 Bar. Three types of test could be supplied AC high voltage to test package causing of breakdown via insulators. After that taking note the value of breakdown was the liquid insulator of test material at 29.86kV its solid insulator at 36.32kV and its gas insulator (oxygen) at 48.40 kV

At present global warming is a major problem that needs to be addressed and mitigated. The problem arises because human housing construction is increasing. The surface of the soil which is a source of vegetation was scattered by the building. The impact of the construction resulted in higher overall temperatures. This is caused by the heat accumulated in the building material. Particularly for building materials that have been exposed to direct sunlight this has had an impact on the comfort of the occupants in the building. This research is an experiment to make a wall of plants from a tattoo. The natural plant material was planted to study the solar radiation efficiency of the planting wall of the tattooed leaves installed on the test box. Based on the analysis of the data it can be concluded that the test wall covered with vegetation leaves the temperature lower than that of the other walls. Different test walls make different internal and external temperatures. Sun radiation affects the test wall temperature varying according to the amount of sun radiation received. Observed by changing internal and external wall temperatures at different intervals. Use plants to protect the walls to prevent heat by keeping the walls under the shade of the plant. It also radiates heat through the leaves. Leaves are a thermodynamic variable that is cooled down by the evaporation of leaves. Plants on the wall will absorb the water inside to evaporate. The temperature of the tree is cool. When combined with the airflow through the wall the shade will blow the hot air under the leaves and the water vapor from the dehydration process of the plant. The heat from the tree wall to the environment is better. As a result the internal temperature decreased.

This research aims to investigate and test the feasibility of the production of natural teak sheets and study the appropriate production methods. Study physical properties and mechanical properties to compare with industry standard insulation sheet. The ratio of tattoo and hyacinth. 5% 7% 9% of the material were dried at 400 600 800 kg / m3. The results showed that the modulus rupture. Elastic modulus And thickness swelling. It varies with the amount of glue. The nature of the tattoo causes absorption in the material if the density increases the water absorption will decrease. Compared to standard insulation products. The amount of adhesive is 7% of the weight of the material when dry. The density of 800 kg / m 2 is 25 kg / cm2. 140 degree Celsius ruptured modulus and elastic modulus But the thickness of the swelling has not met the criteria. In the next production should be mixed waterproofing in the work.

This research aims to develop the coconut coir and fiber indoor acoustic and thermal insulation boards mixed with natural latex. The 5 ratios of coconut coir: coconut fiber: natural rubber were equal to 0.1: 0.9: 0.1 0.1: 0.9: 0.15 0.1: 0.9: 0.2 0.1: 0.9: 0.25 and 0.1: 0.9: 0.3 by weight. The indoor acoustic and thermal insulation boards were produced by knitting the coconut coir and fiber spraying the natural latex and heat compressing. The properties testing of indoor acoustic and thermal insulation boards included the density test water absorption test tensile strength test thermal conductivity test sound protection efficiency test and real usage test. From the results 0.1: 0.9: 0.15 ratio is the most suitable ratio of coconut coir and fiber indoor acoustic and thermal insulation board mixed with natural latex. The natural latex which putted in these indoor acoustic and thermal insulation boards can reduce the water absorption and increase tensile strength and sound protection efficiency.

This research aims to develop the coconut coir ceiling board mixed with natural latex. The 6 ratios of gypsum plaster: coconut coir: sodium silicate: natural rubber: tap water are equal to 1: 0.15: 0.03: 0.00: 1 1: 0.15: 0.03: 0.01: 1 1: 0.15: 0.03: 0.02: 1 1: 0.15: 0.03: 0.03: 1 1: 0.15: 0.03: 0.04: 1 and 1: 0.15: 0.03: 0.05: 1 by weight. The ceiling boards were produced by casting in normal temperature (30 – 35 degree of Celsius). The properties testing of coconut coir ceiling board mixed with natural latex followed the TIS 219-2009 standard (gypsum plasterboard) including: breaking load nail pull resistance deflection water absorption density thermal conductivity coefficient and real usage. From the results 1: 0.15: 0.03: 0.03: 1 ratio is the most suitable ratio of coconut coir ceiling board mixed with natural latex. This developed ceiling boards can reduce the quantity of coconut coir waste and get the good thermal insulation ceiling board products.