This research objective is to improve the overall equipment effectiveness of the water filtration systems in the case study of the Water Treatment Plant which divides the water production into 4 production lines. The water filtration system has an electric actuator and gear is the main machine in the water filtration system. An electric actuator and gear have more machine breakdowns. That makes the water filtration system is the bottleneck of the water production process. This research study is divided into two steps: the first step is the presentation of the equation and the steps to measure the Overall Equipment Effectiveness of the water filtration system. The equation used data from the computer maintenance management system to analysis on mean time between failure data (MTBF) mean time to repair data (MTTR) and water production process data. The results can be improved the overall equipment effectiveness of the water filtration system increased to 0.11% 0.68% 0.44% and 2.44% respectively in each production process line. And increased Quantity of Filtration Water increased to 328500 m3/year 1168000 m3/year 1022000 m3/year and 3832500 m3/year respectively in each production process line. In this research used the pillar of focus improvement. By adding a protection system to prevent machine breakdown because of the most of the problems are found that the protection system malfunctions. This is the most problem in the 4th And then used engineering knowledge to improve water production and the success factor are required a human resources of all parties to cooperate brainstorm and analyze the causes of various losses in order to eliminate them.

HV power distribution system circuit breaker are important devices in substations. Such as Malfunction or deterioration of equipment with in the substation will directing impact on the stability of the power distribution system and affect the reliability of the system. In addition this means that it is necessary to assess the actual condition of the proper condition-based operation and maintenance. Thus this thesis presents condition assessment procedure for equipment by using technical information visual inspection by Weighted Scoring Method. Weighting technique is used to determine important weight testing methods of devices by using Analytic Hierarchy Process (AHP). Testing methods for circuit breaker are such as visual inspection contact timing test. Scoring technique is divided into 1-3 levels by classifying on actual evaluate equipment consisting of consisting of good moderate bad. This thesis proposes a software development in order to organize the database and calculate the analysis of the condition of equipment in 5 HV substations. The evaluation results will be divided into 3 levels good medium and bad condition. According to the evaluation level the maintenance types are separated into 1) regular maintenance 2) increase the frequency of maintenance and monitoring of the test 3) equipment must be improved urgently. Finally abnormal incidents of equipment and cost of HV equipment maintenance can be reduced in effective way.

The objectives of this study is to increase efficiency of steam boiler 2.5 ton per hour which used liquid petroleum gas LPG as fuel. bringing heat recovery inside boiler chimney stack to preheat feed water with technology heat Exchanger Economize. Taking the economizer with its pipe length of 1000 mm and 62 mm diameter for 64 pipe is a cross flow with staggered tube to increase water temperature before entering the boiler pass to deaerator The study is carried out to compare the differences and savings of the feed water temperature steam boiler efficiency and fuel consumption between having the economizer installed and uninstalled. reference to study The result after installed the heat exchanger economizer the feed water is passed into steam boiler deaerator higher temperature from 38.30°C to 67.20°C which leads to increase efficiency of steam boiler from 81.59 % to 85.65 % meaning that the fuel consumption of steam boiler will be reduced 4.97 %

This research was studied to determine the optimum value for condition based maintenance of split type air conditioner by measuring the temperature humidity and flow of air through the fan coil unit. Measuring electric current and voltage of split type air conditioner. Find the energy efficiency ratio (EER) based on the actual use compared to the EER was determined by the manufacturer. To find the suitable maintenance and cleaning air conditioner for each. In conducting this research is split type air conditioner. Rated cooling 25000 Btu/hr. Rated power 2291 watts. Rated current 9.89 amperes. Rated voltage 220 volts single phase. Using the refrigerant R-22.EER 11.02Btu/hr/watts. Running 24 hour sperdayat a temperature of 18°C. Research indicates that the EER before maintenance is equal to6.23Btu/hr/watts. After maintenance is the EER of 20.2Btu/hr/watts or EER value the increase was 69%. Thus preserving the EER of air conditioner. The condition based maintenance in reasonable time is one way that can help save energy.

This research proposes a hidden Markov model for detecting machines with multiple fillers producing soft drink for quality control in order to reduce defective products. The proposed model is compared with a classical generalized estimating equations model (GEE). The monthly data the number of defective products the correctness and the time spending in correction were collected from a machine in a sample factory in Pratumthanee province. The two hidden states of the fillers are workable and unworkable. The states has a logistic distribution. The results show that the correctness of the filler error occurrence does not improve the probability of being in a unworkable state neither the period of time spending on correction. The current state seems to be the same as the previous state