Moisture content has a marked influence on all aspects of paddy and rice quality. These issues also have significantly importance for rice industry and economy of Thailand. Many drying process such as spouted bed technique and fluidized bed technique are extremely studied in terms of instrument design and energy consumption. However these drying processes were not suitable for high economic rice. Because of these processes performed highly damaged kernels during drying process. The objective of this project we proposed the alternative drying system that perform low damaged paddy kernels. We also were design and fabrication drying system for paddy in terms of conveyer pipe. This machine have the performance including feed rate approximately 22.83 kg/hr. drying temperature 30-120ºC air velocity 0-1.5 m/s drying time 14.64-16.91 min and energy consumption 6.02 baht/hr. We improved our machine by drying the RD41 paddy at moisture content 28 (%w.b.). We also setup drying temperatures 40°C 45°C 50°C 55°C and 60°C with air velocities 0.7m/s 1.0m/s and 1.5m/s. We found that all drying temperatures have the final moisture content lower than 15 (%w.b.) and percentage of complete paddy after drying (HRY-paddy) more than 96%. For the kernels quality we found that HRY-Brown rice tend to increase with drying temperature increased. We also found that HRY-Unbroken kernels for polishing tend to decrease between drying temperature 40°C - 50°C for air velocities 0.7m/s and 1.5m/s. Therefore these results obtained can be such a high potential approach that can be used for further developing into rice economy and industry of Thailand.

This research presents a study of the compressive strength tensile strength flexural strength and water absorption of Cellular Lightweight Concrete containing fine fly ash and ground bagasse ash. Portland cement (CT) is partially replaced with pozzolans 20 30 and 40% by weight of the cementitious materials. The results show that the compressive strength tensile strength flexural strength and low water absorption of Cellular Lightweight Concrete improves substantially with partial replacement of Portland cement with fly ash and bagasse ash. Cellular Lightweight Concrete mix cement containing 20 and 30% of pozzolans can be used to make cementitious materials. In addition the use of fly ash and ground bagasse ash produces Cellular Lightweight Concrete mix with good compressive strength tensile strength flexural strength and water absorption.

This research presents a study of the resistance to carbonation compressive strength and porosity of concrete containing ground bottom ash. Three different of bottom ash finenesses viz. coarse bottom ash (GBA-1) ground medium bottom ash (GBA-2) and ground fine bottom ash (GBA-3) were used for the study. Portland cement (CT) is partially replaced with ground bottom ash at 0-40% by weight of the bottom ash. The water to binder ratio was kept constant at 0.5. Compressive strength porosity and resistant to carbonation of concrete were investigated. Fine bottom ash has a high potential to be used as a good cementitious material. The results show that the compressive strength and low porosity of concrete improves substantially with partial replacement of Portland cement with fine bottom ash. Concrete mix cement containing 10-20% of fine bottom ash can be used to make cementitious materials. The use of finer bottom ash produces concrete mix with good strength and resistance to carbonation.

The purposes of the research were to create and efficiency validation of computer Assisted for the courses of practiced to reading Creating and Evaluating the Effectiveness of Computer Assisted Instruction Program Subject Manufacturing Processes Chapter 5-8. based standard 90/90 and analyses the leaning achievement of the student after by using computer assisted instruction . The subjects in the study were 25 first year. Diploma students enrolled in Rajamangala University of Technology Phra Nakhon. The Researcher using the experiment by let the students do until test before class And then study by using computer assisted instruction focused on practiced to basic turning . After that let students do the unit test again at the class and calculate to find out the efficiency of the computer assisted instruction. And analyzed the learning achievement of students after study. The research result revealed that the efficiency of the computer assisted Instruction was efficient in standard 90/90 Moreover after learning achievement at significant level of 0.05.

The purposes of the research were to create computer assisted intruction for Manufacturing process subject to find out the efficency validtion of computer assisted instruction based on the standard of 90/90 and to analyse the students learning achievament after using the computer assisted instrucion. The subjects the study were 17 first-year diploma enploma engineering students enrollong at Rajamangala University of Technology Phra Nakhon. The researcher made the experiment by having the students pretest. The they studied by using the computer assisted instruction foused on practiocing basic turning. After the students had studied and had posttest the efficency of the computer assisted instruction was calculated as well as leaning achievement was analysed. The research resilt revealed that the efficiency of the computer assisted instruction was at the standard of 90/90. Morever the learning achivement after using the computer assisted instruction was different at the singificant lavel of 0.05