This research aims to study the possibility of steel fibers plastic fiber (polypropylene) fly ash and metakaolin mixed into the concrete. The concrete used in the research of the w / c 0.42 By 0.5 percent in the volume of steel fiber and poly propylene fiber in the amount of 0.25 percent by weight of the concrete. Concrete example of this test consisted of plain concrete(OPC).Concrete mixing materials pozzolan fly ash mixed plastics synthetic fibers of the type poly propylene fiber(FA/PP)concrete mixing materials pozzolan fly ash mixed plastics synthetic fibers of the type steel fibers (FA/ST) concrete mixing materials pozzolan meta kaolin mixed plastics synthetic fibers of kind polypropylene fiber(MK/PP) and concrete mixing materials pozzolan meta kaolin mixed plastics synthetic fibers of the typesteel fibers (MK/ST) by casting a cylindrical sample size 10 x 20 cm. Sample size 10x10x10 cm. cube and sample size 10x10x35 cm. beam. After 28 days and cure water concrete examples to test the strength of the pull compressive strength and flexural strength. And to test the movement of chloride through the concrete with Chloride Migration Test. Then bring the strength of the pull compressive strength flexural strength and the chloride permeability of concrete. Bringing concrete materials pozzolan mixed with synthetic fibers to develop the quality of concrete with improved efficiency and also reduces the porosity of the concrete. And permeability of chloride formed in the concrete (Only in landscape with the sea). The test can tell. Concrete mixing materials pozzolan with synthetic fibers to make a significant impact on the properties of concrete is improved as well. Depending on the type of polyester and the amount of material to pozzolan blended.

Bottle of poly propylene (Polypropylene: PP) to replace conventional non-conventional polycarbonate bottles. (Polycarbonate) are used as bottles and water bottles toys household goods which are BPA-contaminated and poly ethylene Terephthalic acid (Polyethylene. Terephthalate) PET water bottles juice bottles. Bottles And bottles and other drugs and chemicals have been canceled. Then turning to the bottle to PP because of the lightweight bottles float on water. Plastic and white The plastic safety can be reused many times (even used) in the UK has the plastic water bottles poly propylene and (Polypropylene: PP) to make water bottles so long but not as popular as bottle caps. open it (lid torn) bottle shape is beautiful with a little input. The process is a extrusion blow but from research using the dryer Injection blow (Stretch Blow) has studied the creation of injection molded preform 19 gram in order to blow a 500 ML size thickness. Preformed from 3.34 mm to 3.46 mm the average measured height of the preform from a mean of 70 mm measured at 69.88 m. m. the oldest of the preform. the average measured 25 mm and 24.96 mm is how a 500 ML size bottle blow molding blow molds percent discrepancy between the form specified. Average Percentage 0.0853 experimental results Blow the preform 19 gram of the injection can be molded into the bottle completely and can not be used as drinking water is due to the equipment used. blown trial Need to study next.

The purpose of this research is to study the effect of a safety system provided for wall tile external building activity on productivity. The safety system composed of (1) stable scaffolding system (2) providing clean and not slip walkways on the scaffold (3) installation of handrails not less than 0.90 meters in height along sides of the scaffold (4) installing safety nets around outside perimeters of the scaffolding (5) indicating working area (6) installing stairs (7) providing protection for people who works below (8) providing tools and equipments for transporting material which are safe and ready for using and (9) providing personal protective equipment for workers. Cost of the safety system is 79318 baht for a wall tile area of 385 m2 or approximately 206 baht/m2. Productivity rates for prior and after the used of safety system are 1.91 and 1.85 m2/person/day respectively. The productivity declines for approximately 3 %. In addition our study found an impact of work is a height of Building the wall tile external productivity could decrease for 6 %.

This objective of this research is to study the development of the pararubber tapping knife in order to determine the optimum of the edge and oblique angle and to compare the efficiency of the electrical motor and Je-Bong knife. The product was manufactured by iron steel carbon S45C and AISI 5160 with 75-90 degree edge knife and 0-45 degrees oblique angle. The results can be concluded that the optimum condition of the edge knife oblique knife and the cutting force were 75 degree 45 degree and 3.51-51.42 N respectively. It was found that the cutting force was straightly increased form 0-51.42 N and then gradually decreased. The energy consumption of timber cutting was 0.00370 J/mm3. The quality of the rubber tap using electrical motor was 72.07% which was higher than 2.8 of Je-Bong knife. As the results this product shows the average of rubber timber which is 2.22 mm. in 22.51 s.

The tungsten carbide powder which recycled from the scarps of cemented tungsten carbide produces the purity of 99%. Using this tungsten carbide powder to manufacture a cutting tool and test its properties are the main objective of this work. Based on the standard SNMG 120408 the cutting tool with the dimension of 12.7x12.7x4.76 is fabricated. With the 100 hours of Ball milling grinding Cobalt mixing and sintering at 1430 °C the experimental result is impressive. At 15% of mixedcobalt the cutting tool with the hardness of 2031.6 HV be able to cut S45C steel in the feed rate of 0.2 meters per revolution and 45 m/min in the cutting speed. Besides that it provides the depth of cut of 0.25 mm and when it reaches the cutting distance of 4200 mm the surface roughness is 3.65 μm. In comparison with the cutting tool made of imported tungsten carbide powder which has a hardness of 1254 HV it turned out that our cutting tool has the equivalent quality in terms of hardness and wear resistance. Hence this work is considered to be a material development and a tungsten carbide cutting tool manufacture those would be the vital base to lead us to a commercial production.