This reseach presents development of engineering education about automation engineer. The objectives of develop education technology automatic control systems. The development and pilot institutions or company associated with the agency so that it can compete with companies in the ASEAN countries. In the design research and development training kit to support and use in teaching and learning control liquid level like an industry as the reality of the industry. The trainner could be applied to the advanced control theory for experiment in teaching or training in class room similary industry personnel. The hardware is compatible with existing standards. It is increase the capacity of existing courses such as a course to learn basic control system consists of a sensor industry around the outside parmerter. The sensor could be real measured and simulation from plant model. The student can control the virtual experiments. Controller could be learning such as PLC Microcontroller and computers. The experiments determine relation of correlated response signal ON-OFF and PID by adjust Gain control systems that have tenor as same as control theory which describes the response of the control. The experimental results of this the research collected in the operating room. The ability to control the system to could be doand meet the taget and follow by objective

This research aims to solve the basic knowledge problems of undergraduate students who study Calculus 1 for Engineers in the Faculty of Engineering Rajamangala University of Technology Phra Nakhon. Basic Mathematics tutorials are conducted in order to improve their knowledge which leads to increase the efficiency of learning the Calculus 1 for Engineers. The basic mathematics lessons are designed and their efficiency is assessed in the tutored group using the 60/60 criteria. The pretest and posttest are assigned to both tutored and tutorless groups as well as the tutored student satisfactions with thedesigned lessons and the Calculus 1 for Engineers are conducted. The result shows that the efficiency of the designed lessons is 76.60/64.67 which is higher than the criteria; hence they are proper to be used. For the treatment group the posttest grades are higher than the pretest grades significantly (.05) with the effectiveness of 34.67. The comparison of the learning achievement for the Calculus 1 for Engineers shows that the grades of the tutored group are higher than the grades in the tutorless group significantly (.05) as well. The student satisfactions for both the designed lessons and the Calculus 1 for Engineers are at the levels of good and very good.

The research aims were 1) to develop and find out the efficiencies of the multimedia computer Instruction program on Information Services and Information Searching for Information Services and Information Searching to be efficient in accordance with defined 80/80 criteria 2) to compare the learning achievement before and after learning of students who studied with the multimedia computer Instruction program on Information Services and Information Searching for Information Services and Information Searching and 3) to find out the students’ satisfaction towards the program. A purposive sampling technique was employed to obtain the subjects of this study who were 30 Engineering students of Electrical Engineering Department Faculty of Engineering Rajamanagala University of Technology Pranakhon. They were registered in the second semester of academic year 2013. For instruments were as follows: the multimedia computer Instruction program on Information Services and Information Searching for Information Services and Information Searching the evaluation form of the multimedia computer instruction program the students’ achievement tests and the questionnaire of students’ satisfaction. After the experiment the scores obtained from the test were analyzed by using percentage mean standard deviation and t-test. The results of the study showed that the efficiency of the multimedia computer Instruction program on Information Services and Information Searching for Information Services and Information Searching was 81.22/83.55 which was higher than the specified criteria of 80/80. The scores of after learning with the multimedia computer Instruction program were significantly higher than the scores of before learning at .05 level. And the students revealed that they were highly satisfied with the program.

การวิจัยเรื่องการพัฒนาชุดการเรียนรู้สำหรับผู้ขอใบอนุญาตประกอบวิชาชีพครู เพื่อเพิ่มสมรรถนะด้านการจัดการเรียนรู้กับความเป็นครู มีวัตถุประสงค์เพื่อพัฒนาชุดการเรียนรู้สำหรับผู้ขอใบอนุญาตประกอบวิชาชีพครู เพื่อเพิ่มสมรรถนะด้านการจัดการเรียนรู้กับความเป็นครู กลุ่มตัวอย่างเป็นนักศึกษาระดับประกาศนียบัตรบัณฑิตวิชาชีพครู ของมหาวิทยาลัยเทคโนโลยีราชมงคลพระนคร (ทั้งนี้เนื่องจากมหาวิทยาลัยเทคโนโลยีราชมงคลพระนคร ได้รับการรับรองหลักสูตรประกาศนียบัตรบัณฑิตวิชาชีพครู จากคุรุสภาเป็นแห่งแรก) จำนวน 45 คน โดยใช้วิธีเลือกแบบเจาะจง (Purposive Sampling) ผลการวิจัยพบว่า 1. ประสิทธิภาพของชุดการเรียนรู้สำหรับผู้ขอใบอนุญาตประกอบวิชาชีพครู เพื่อเพิ่มสมรรถนะด้านการจัดการเรียนรู้กับความเป็นครู มีประสิทธิภาพ เท่ากับ 88.97/88.43 ซึ่งสูงกว่าเกณฑ์ 80/80 ที่ตั้งไว้ 2. ผลสัมฤทธิ์ทางการเรียนของนักศึกษาหลังเรียนด้วยการใช้ชุดการเรียนรู้สำหรับผู้ขอใบอนุญาตประกอบวิชาชีพครู เพื่อเพิ่มสมรรถนะด้านการจัดการเรียนรู้กับความเป็นครู สูงกว่าก่อนเรียนอย่างมีนัยสำคัญทางสถิติที่ระดับ .05 3. ระดับความพึงพอใจของนักศึกษาที่มีต่อการใช้ชุดการเรียนรู้สำหรับผู้ขอใบอนุญาตประกอบวิชาชีพครู เพื่อเพิ่มสมรรถนะด้านการจัดการเรียนรู้กับความเป็นครู มีค่าเฉลี่ยโดยรวมทุกด้านอยู่ในระดับมาก (𝑥̅=4.30S.D.=0.69)

The research aims were 1) to develop and find out the efficiencies of the multimedia computer Instruction program on Information Services and Information Searching for Information Services and Information Searching to be efficient in accordance with defined 80/80 criteria 2) to compare the learning achievement before and after learning of students who studied with the multimedia computer Instruction program on Information Services and Information Searching for Information Services and Information Searching and 3) to find out the students’ satisfaction towards the program. A purposive sampling technique was employed to obtain the subjects of this study who were 30 Engineering students of Electrical Engineering Department Faculty of Engineering Rajamanagala University of Technology Pranakhon. They were registered in the second semester of academic year 2013. For instruments were as follows: the multimedia computer Instruction program on Information Services and Information Searching for Information Services and Information Searching the evaluation form of the multimedia computer instruction program the students’ achievement tests and the questionnaire of students’ satisfaction. After the experiment the scores obtained from the test were analyzed by using percentage mean standard deviation and t-test. The results of the study showed that the efficiency of the multimedia computer Instruction program on Information Services and Information Searching for Information Services and Information Searching was 81.22/83.55 which was higher than the specified criteria of 80/80. The scores of after learning with the multimedia computer Instruction program were significantly higher than the scores of before learning at .05 level. And the students revealed that they were highly satisfied with the program.