A Study direction milling affecting surface roughness by the Taguchi method with a 10 mm. bite milling cutter the direction of milling is clockwise G41 and counter clockwise milling. G42 is intended to measure the milling direction of the workpiece by testing with brass and aluminum materials. By measuring the milling direction the feed rate is 100 mm / min the speed is 1500 rpm and the depth of milling is 3 mm. The clockwise and counterclockwise hands provide better surface roughness and from the test the factors that affect the roughness of the surface are brass and aluminum. The coefficient of variation in surface roughness of the test specimens was 4 factors namely feed rate of 80 100 and 120 mm/min speed of 1200 1500 and 1800 rpm. The 3 4 and 5 mm workpieces are machined and the milling direction is divided into two parts: G41 clockwise bite counterclockwise G42 brass and brass material testing. It is found that the correct direction for brass milling is the direction of machining G41 with a cutting speed of 1200 rpm. The feed rate is 120 mm/min. And the depth of bite is 4 mm. The surface roughness of the workpiece is minimal. The surface roughness is 0.84 ?m. The optimum direction for aluminum milling is G42 cutting direction. The cutting speed is 1200 m/min. The feed rate is 120 mm/min. And the depth of biting is 5 mm. The surface roughness of the workpiece is minimal. The surface roughness was 0.75 ?m.

The objective of this research was presented a decision support making process for efficiency improvement of drinking water processing using retrofit technique for machine and equipment rehabilitate. This methodology was applied Analytic Hierarchy Process (AHP) for selecting an appropriate maintenance sub-contractor. To complete the research existing water purifying machine and tools were inspected to assess its capacity. Future capacity of the purifying machine was also identified. Consequently machine and tools such as water tank and water filter were inspected for retrofitting for the example water tank water filter water quality control and bottle packing. Finally the analytic hierarchy process was utilized to select the most appropriate maintenance sub-contractor. In this process both qualitative and quantitative processes were analysed. The result of this research has been found that this multicriteria decision making process could be used to support the decision making investment process of water purification retrofit unit at Faculty of Engineering Rajamangala University of Technology Phra Nakorn efficiently. Furthermore it could be reduced bias from decision makers while the decision was accepted by all stakeholders.

Now is a great time to be an entrepreneur as there are many solar business opportunities to develop. The market for solar products is growing quickly over last year so now this market is helping people get the most from the sun. The market and can be a great source of ideas for usage in the home and with your business. To measure efficiency of the solar energy in Thailand we have installed and tested the solar cell to detect and record the voltage electric current electric power temperature on the solar cell outdoors and check factors related to efficiency of the solar cell when high temperature and efficiency of the solar cell in various weather conditions. The following is the summary of average Wattage and used the Cumulative Sum Control Chart techniques. The Resulting research shows the direct current electric supply below: Solar cell “A” current distribute 85.78 W Solar cell “B” current distribute 81.19 W Solar cell “C” current distribute 95.65 W The temperature on the solar cell can be seen below: Solar cell “A” is 53.88 °C Solar cell “B” is 53.68 °C Solar cell “C” is 52.79 °C Summary of result is the solar cell “C” has highest electric power and the least temperature and this solar cell “C” suitable for use in Thailand. This research results is only relevant when deciding which solar cell to select

This thesis proposes technical performance evaluation and economic decence for the combination of harmonic correction devices in Industry. Currently an electronic device is popularly applied in power network. Although it is a higher performance device than the existing device it still causes the power quality issues and then network failure. Especially harmonic disturbance in the network it is a harmonic source that generates harmonic current into the network. Many types and solutions are available in the present time therefore the suitable and optimal financial solution must be considered. A network model for the analysis of harmonic correction devices suitable solutions and optimal financial has been established in the simulation software that bases on the power and Break Even Point (BEP) equations. The results of analysis shown that the performance of harmonic correction devices suitable solution and BEP of investment in match to the using of a detuned filter bank and an active harmonic filter (case 8) thus these information will be valued for the end-user.

This research aims to produce scrap page kaolin of brick construction. The kaolin clay ratio of 100: 0 80:20 60:40 50:50 40:60 20:80 and 0: 100 by volume Add mixed with rice husk and rice 15 percent by weight A total of seven ratios. According to standard tests or TIS. 77-2545 ordinary story brick building. The moisture content and water absorption is increasing. While density Thermal conductivity resistance flexural and compressive strength tends to decrease. The best ratio of 80:20 by volume with compressive strength 43.16 kg / cm 2 and 24.93 percent water absorption. Criteria standard of TIS. 77-2545 requiring compressive strength not less than 35 kg / cm2 and water absorption must not be higher than 25 percent. Can be used in the manufacture of brick construction including building decorative wall can be developed into products. Because skin color and beautiful