This research work was to study the improvement of toughness of polylactic acid (PLA) and the cost reduction of raw material with addition of untreated and treated oil palm fiber (OPF). The detail of this work was divided into two parts. The first was to find the suitable condition for surface treatment of OPF with sodium hydroxide (NaOH). The second part was to study the effect of untreated and treated OPF contents on the mechanical properties of PLA. For surface treatment of OPF NaOH concentrations and immersion times were varied from 0 to 15 wt% and 0 to 30 min respectively. Aspect ratio (L/D) and surface of untreated and treated OPF were investigated by using optical microscope and scanning electron microscope (SEM) respectively. The result suggested that the most suitable condition for surface treatment of OPF was NaOH concentration of 10 wt% at immersion time of 20 min. Treated OPF was occurred microporous and had more rough as compare to untreated fiber. For the effect of untreated and treated OPF contents on the mechanical properties of PLA it was evaluated by tensile and impact testing. SEM was used for investigation of interfacial adhesion and fiber dispersion. The results showed that tensile modulus and impact strength tend to increase with adding 2.5 wt% OPF content and slightly changed at higher OPF content whereas ultimate tensile strength and elongation at break decreased with increasing fiber content. Surface treatment with NaOH led to enhancement of mechanical properties of composite due to improve interfacial adhesion and fiber dispersion.

The purpose of this project is analyze to the transparency and mechanical properties of lithium disilicate for dental application. Lithium disilicate glass-ceramic were synthesised by using melting technique in SiO2-Li2O-Al2O3-K2O -P2O5 glass system and heated treatment samples at the crystallization temperature of that glass. The Differential thermal analysis: DTA X-ray diffraction: XRD were used analysis on thermal properties phase formation. Moreoven density Hardness were determined to evaluate the properties at physical and Mechanical respective by the X-ray diffraction showed that the glass-ceramic sample demonstrated the phase of Li2SiO3 Li2Si2O5 and SiO2 . The optimum of glass-ceramic. Sample were on faired with the sample heated 650°c first step and heated at 800°c for second step. That show the highest hardness valve at 755 HV

The purposes of this study were to develop a video presentation about the fashion series of the faculty of textile industry and fashion design for publicize to the Faculty of Testile Industry and issue fashion and to satisfaction to the media audience develop a video presentation on the fashion series of the faculty of textile Industry and Design. The fashion part by using the sample group to evaluate the satisfaction of the media questionnaire was the general public who came to watch the video presentation at the fashion show of the grade 4 students fashion series of the faculty of textile Industry and fashion Design Rajamangala University of Technology Phra Nakhon from 50 people. The data analysis was frequency percentage mean and standard deviation. The study indicated that satisfaction with the video presented on the fashion series of the faculty of textile Industry and fashion Design was at a high level (=4.22). When considering each aspect it was found that content satisfied was at a high level (=4.12) and the presentation aspect was satisfied at a high level(=4.33)

The purposes of this study aim 1) to evaluate the academic achievement and 2) to study learners satisfaction towards teaching multimedia in the Course Ngor30275 Commercial Flower Arrangement Unit 6 Introduction to Flower for high-school students of Chaichimplee Wittayakom School Bangkok. Sample in this study is 30 students who attended Sports and Home Economics Program and chose Home Economics Course in to 2nd semester of the academic year 2019. According to studies 1) the result of the teaching multimedia proficiency assessment on the content basis by 3 experts was at the highest level by all accounts and the mean was equivalent to (X̅ =4.73S.D. = .31). And the result on the multimedia basis was also at the highest level and the mean was equivalent to (X̅ = 4.63 S.D. = .29) . 2 ) the assessment in the performance of a representative sample of students in the 8 different patterns using scoring rubrics whose standards were at every high level. 3) the assessment on the student’s satisfaction with the teaching multimedia for 8 patterns were as follow Pattern #1 - Spherical Pattern the overall satisfaction analysis result was at the highest level and the mean was equivalent to (X̅ = 4.61 S.D. = .06) . Pattern #2 - Equilateral Triangle Pattern the overall satisfaction analysis result was at the highest level and the mean was equivalent to (X̅ = 4.72 S.D. = .05). Pattern #3 - Scalene Triangle Pattern the overall satisfaction analysis result was at the highest level and the mean was equivalent to (X̅ = 4.61 S.D. = .03). Pattern #4 - Tall Pattern the overall satisfaction analysis result was at the highest level and the mean was equivalent to (X̅ = 4.68 S.D. = .06). Pattern #5 - Short Pattern the overall satisfaction analysis result was at the highest level and the mean was equivalent to (X̅ = 4.64 S.D. = .06). Pattern #6 - Long-Bouquet Pattern the overall satisfaction analysis result was at the highest level and the mean was equivalent to (X̅ = 4.66S.D. = .05). Pattern #7 - Circular-Bouquet Pattern the overall satisfaction analysis result was at the highest level and the mean was equivalent to (X̅ = 4.69 S.D. = .05). Pattern #8 - Flower Arrangement Pattern the overall satisfaction analysis result was at the highest level and the mean was equivalent to (X̅ = 4.72 S.D. = .08).

The research was to develop environmental packaging from composite materials hyacinth fiber rice husk and coconut fiber for temperature preservation to replace the use of foam packaging that cannot be degraded naturally. In the composite materials water hyacinth fiber rice husk and coconut fiber at the ratios 7: 1: 2 1 : 1 : 2 and 1: 1: 1 were extruded by heat using isocyanate glue as a solder and testing the physical and biological properties of composite materials as fiberboard. For testing of temperature preservation of the bio packaging heat transfer test to obtain the bio-packaging for the environment the composite materials of fiber water hyacinth rice husk and coconut fiber at the ratio of 7 : 1 : 2 was the most appropriate type. Since it had a density of 0.7 grams per cubic centimeter strength of 26.76 MPa moisture content of 3.8 percent ages and swelling of 26.63 percent ages. In dry condition at room temperature it could store heat for 2 hours and could retain the cold temperature as shown for the temperatures rising from 4 to 30.7 degree Celsius within 2 hours. This research therefore presents a new alternative method of natural fiber composite materials application for temperature preservation in order to reduce the use of foam containers and increase cost value to natural bio waste materials.