This research aims to reduce waste in the production process to meet the target to find ways to prevent defects occurring in the curing process and to improve preventative measures available today. The waste found in the curing process label the edges are blamed blistering edge under inflated tires cover on low. After brainstorming to find factors that affect the defect by using techniques Six Sigma (Six Sigma).The work five main steps in performing a job defining the problem measuring analyzing problems improved control and severity surveillance and monitoring disorders of the process. It was found that the raw materials are the main parameters that cause much waste as possible. Therefore we have developed an approach to improve the material by adding a preliminary inspection and design documents to determine work procedures. The benefits of this research can reduce the waste that occurs in the curing process of the target by reducing the rate of 8.0 % an average of 7.3% in a survey from January to May 2557 is an average rate of 6.0% In a survey in June 2557 equivalent to saving manufacturing cost 135045 baht per month. The rate of decline is likely to be quite good that make employees feeling and effort to cooperate in the reduction of waste in the production process.

The purposes of this study were to costs and fees of solid waste management and to provide resolutions towards solid waste management of Omnoi City Municipality. The data were collected by using financial data during 5 years from 2008 to 2012. Then the data were calculated to figure out the costs of solid waste management divided by solid waste management-related cost and non-solid waste management-related cost. The results found that annual solid waste generation rate of Omnoi City Municipality was 0.53 ton/person or 0.65 ton/household. The annual average quantity of solid waste was 27327.26 ton/year and the annual cost of solid waste management was 2084.62 Baht/ton. The costs were separated into the solid waste management-related cost including the cost of main department responsible for solid waste collection service as follows; 1) direct labor 493.79 Baht/ton 2) direct materials 170.83 Baht/ton 3) production cost 231.07 Baht/ton and 4) cost of solid waste management 477.95 Baht/ton. Moreover the non-solid waste management-related cost or the cost allocation supported by other departments consisted of Administration Department and Council 95.78 Baht/ton Office of the Municipal Clerk 308.43 Baht/ton Division of Technical Services and Planning 93.49 Baht/ton Division of Finance 137.25 Baht/ton and Division of Sanitation and Environment 76.03 Baht/ton. Omnoi City Municipality could gather the fees of solid waste management about 152.32 Baht/person/year or 186.61 Baht/household or 290.31 Baht/ton or 13.93 percent of the cost of solid waste management. According to the cost calculation of solid waste management the supporting departments associated with the solid waste management should allocate sufficient budget and provide the cost data which would be useful for administrators at all levels to measure and improve performance. Furthermore additional policies related to the solid waste management should be defined to reduce the management cost and quantity of solid waste. The responsible departments should also promote people’s understanding and realization of duty to pay for fees of solid waste management.

Earthworms play an important role in the cycling of plant nutrients turnover the organic matter and maintain the soil structure. The decomposition of different types of organic substrates (household waste agro-residues and sludge) is able to be turned into valuable vermicompost. The percentage of nitrogen phosphorous and potassium in vermicompost was found to increase on different types of organic waste. Vermicompost is a finely divided peat like material with high porosity good aeration drainage water holding capacity microbial activity enriching of nutrients and buffering capacity thereby resulting the required physiochemical characters congenial for soil fertility and plant growth. Vermicomposting is a low-technology environmentally-friendly process used to treat organic waste. Moreover certain species of earthworms are used to enhance the process of organic waste conversion and produce a better end product. The Earthworm species Pheretima peguana were especially used in Thailand.

This research aims to study the using cassava pit wastes mixed with cement to particle board walls. The Portland cement type1: fine sand: tap water ratio is equal to 1: 0.5: 0.416 by weight. The ratios of cassava pit wastes to cement are used following: 0.05 0.06 0.07 0.08 0.09 and 0.10 by weight. The cassava pit wastes are crushed by plastic plastics granulators (pass sieve no.4). The casting of particle board walls use the compression machine in room temperature (30 – 35 degree of Celsius) and control 0.75 g/cm3 of density. The TIS 878-2537 standard (cement bonded particle board: high density) is followed to test the properties of particle board wall. Resulting the cassava pit wastes mixed with cement can cast to particle board walls and have good properties especially the thermal insulation property.

This research aims to develop the Para-rubber floor tiles mixed with ethylene vinyl acetate plastic wastes (EVA plastics) from the factories. The study use Para-rubber STR 20 at 100 phr with various contents of EVA plastics (e.g. 0 5 10 20 40 and 80 phr) and then mixed with chemical substance at constant ratio include zinc oxide at 5 phr stearic acid at 2 phr sulfur at 3 phr mercaptobenzothiazole at 0.5 phr and diphenyl guanidine at 0.2 phr. The samples are ground by two-roll mill and formed by compression molding at 150 degree Celsius with 30x30x0.2 cm of dimension. The properties of the Para-rubber floor tiles are tested under ASTM standard. From the results it is found that the Para-rubber floor tiles mixed with 10 phr of EVA plastics is the suitable ratio for using as the rubber floor tiles and rubber wall tiles in building. This ratio can increase the hardness and wear resistant properties and decrease the density and thermal insulation properties when compare to the Para-rubber floor tiles without EVA plastic.