Energy is an important factor in the necessity of human life. Many countries around the world are seeking alternative energy sources. To use as alternative energy. Our alternative sources of energy are ethanol which can be produced from agricultural products. Including plants with cellulose components. The ethanol can be mixed with gasoline. It is a new product called gasohol. This research use of fresh water weed Hydrilla is a raw material in the production of ethanol. Hydrolysis sweetening and fermentation. The microorganisms used in fermentation processes the yeast is found Hydrilla through hydrolysis the acid is H2SO4 at 0.5 % . Measuring the concentration of the alcohol concentration of 4.0 % VOL 9 Brix %. The Hydrilla through hydrolysis at alkaline NaOH is at a concentration of 1 % concentration of alcohol concentration was 3.5% VOL 8 Brix %. Hydrilla and the Hydro Delight with distilled water (H2O) to measure the concentration of the alcohol concentration of 5.5 % VOL 12 Brix %. Thus it can be said that Hydrilla is a material that has the potential to produce ethanol for energy alternatives. And used as a source of renewable energy. Instead of using raw materials from food plants. And other energy crops.

On Earth all objects have a weight which Earths mass exerts on them to downward force of gravity. The weight of an object can find somethings weights in Newton unite. It calculated on multiply the mass in kilograms by the acceleration of gravity in the units of meters/seconds2. The purpose of this study was to design and develop an experimental setup for measuring the gravity acceleration. It involved designing by using free-fall motion method in vacuum tube based on digital Technology and photo gate sensor measured the velocity of the ball object. The data were analyzed by Microsoft Excel. The value of gravity acceleration obtained at 9.617 m/s2 from the experiment set up. The value from the experiment was compared with the obtained from true value at Bangkok Thailand. It found the error at 1.697 %. The assessment of the quality used a questionnaire for data collection. Five content experts in Physics teaching evaluated it. That found mean 4.89. The results of the study revealed that the experimental set up were excellent quality of and high efficiency. So that this experiment suitable to be used in physics classroom.

Epoxy is one type of materials for adhesive. It was improved the strength by adding the filler such as iron alumina or silica. Generally the epoxy adhesive was mixed with iron for application in the metal adhesive. The mechanical properties were importance of adhesive. Because it was one factor for lifetime limit. The iron/epoxy was casted in the magnetic field which was alignment with surface of samples. The alignment of iron particles was induced with magnetic fields. The mechanical properties and wear behavior of samples were investigated hardness and wear test. It was found that the alignment of iron particles in the epoxy were improves hardness and wear.

Nowadays Eye tracking technology is the next challenges of human computer interaction (HCI). This technology can help people all over the worldaccess computers through systems that use gaze control and especially important for people with physical disability. This research presents a system of assistive technology base on an eye-tracking interface while supported the communication system for independent living of persons with disabilities usability. The primary method of this system consists of a selection of pictogram buttons on three websites which used a low-cost eye-tracking device. The evaluation used the throughput of standards for computer pointing devices as a measurement of user performance to look at an on-screen target and dwell on it for 500ms for selection. The results showed that ten participants with a disability can be pointing and selection their overall mean throughput was 1.08 bits/s. Moreover the overall users of respondents were rather satisfied with the system. Consequently eye tracking technology is a great tool for interaction in the web application for a user with a disability.

This continued 2nd year researchaims to study the development of the para rubber press machine with wrought pattern for continued 2nd-year. Used natural para rubber mixed in a Ta-kuong by normally practical para rubber farmer style to evaluate the rubber press machine. A machine consists of the 11 roller sets in vertical pathway with press sticks on top. The components are as follows: a water press roller with a slope surface to reduce the diameter around 1-1.5 mm from a center the 3-pair sets of normal press rollers and the 2 duo sets of wrought pattern rubber press rollers with the induction motor at 1430 rpm. The rotating transmission based on belts and chains with a . The evaluated results produced the dried para rubber sheets thickness at 3.79 mm on average as the 2nd rubber sheet type standardin marketing need. From a top tray a farmer can put a sticky para rubber piece to a roller press machine easier than normal just 5.9 second on average with lower hand power to handler of the rubber pieces. In finally the wrought patternrubber sheets by a worker to carry the ta-kuong to a top tray of a rubber press machine and a rubber press man to put the para rubber pieces to a machine thus the completed 186 wrought rubber sheets per hour on average.