This research is aimed at studying the development of strong and high strength fiberboard from coconut fiber and corn plant. This is the second consecutive year by using natural latex. To enhance thermal insulation performance. By using the cement ratio: fine sand: coconut pulp: corn fiber: water: surfactant: surfactant is 1: 0.2: 0.0125: 0.0375: 0.3: 0.03: 0.04 by weight Then add natural rubber latex at cement ratio: 5: 1 ratio of natural rubber latex: 1: 0.05 1: 0.10 1: 0.15 1: 0.20 and 1: 0.25 by weight tested in accordance with TIS 878- 2537 on cement slabs. : High density the test results show that the ratio of 1: 0.05 is the fiber cement ratio. The most appropriate the amount of natural latex said. Can make fiber Cement sheets. Best compression and bending strength. And has passed the standard TIS 878-2537 cement fiberboard developed this can help reduce the amount of natural latex is very high. And have a good thermal insulation properties

This research aims to develop the cement board from vesicular basalt fragment which reinforced with steel wire mesh. The ratio of Portland cement type1: fine sand: vesicular basalt fragment: sodium silicate: tap water was equal to 1: 2: 4: 0.03: 0.55 by weight. The 5 sizes of steel wire mesh (steel wire no.25) were installed including: 3/8” 1/2” 5/8” 3/4” and 1”. The cement boards were produced by compression machine. The property tests of cement-bonded fiberboard followed the TIS. 878-1994 standard (cement bonded particle board: high density). From the results the 3/4 of steel wire mesh size was the most suitable size for reinforcing the cement board from vesicular basalt fragment. This developed cement boards was the construction materials which had the high bending strength good thermal insulation and moisture protection properties.

This research aims to develop the gypsum refractory board mixed with corn leaf coir. The 5 ratios of gypsum plaster: corn leaf coir: tap water: sodium silicate are equal to 1: 0: 1: 0.03 1: 0.100: 1: 0.03 1: 0.150: 1: 0.03 1: 0.200: 1: 0.03 1: 0.250: 1: 0.03 และ 1: 0.300: 1: 0.03 by weighted. The gypsum refractory boards were produce by casting in normal temperature (30 – 35 degree of Celsius). The properties testing of gypsum refractory board mixed with corn leaf coir followed the TIS 219-2009 standard (gypsum plasterboard) included: breaking load nail pull resistance deflection water absorption density and thermal conductivity coefficient. From the results 1: 150: 1: 0.03 is the most suitable ratio of gypsum refractory board mixed with corn leaf coir. This developed gypsum refractory boards can reduce the quantity of corn leaf waste and get the good thermal insulation gypsum refractory board products.

This research aims to study the water hyacinth fiber inside high density cement fiber board. By using ratio components among cement : fine sand : water hyacinth fiber : water : catalyst accelerated the formations of cement (aluminum sulfate (AI2 (SO4) 3) calcium chloride (CaCl2) sodium silicate (Na2SiO3)) on the ratio 1: 0.2: 0.075: 0.3: 0.03 by weight of total water hyacinth fiber. The 5 ratios consist of 0.0 (A1 D1 formulae) 0.025 (A2 B2 C2 D2 formulae) 0.050 0.03 (A4 B4 C4 D4 formulae) and 0.1 (A5 B5 C5 D5 formulae) by weighted all fibers were treated with sodium hydroxide solution (NaOH) at a concentration of 12%. The fiber to solution ratio was 1: 10 boiled in open system at 100 °C for 1 - 3 hours. By compressing the mixture cast machine at normal temperature (30 - 35 °C). Use a density of 0.75 g / cm3. From the test results the ratio B4 is the appropriate ratio. Can pass TIS 878- 2537 Cement Board: high density and physical properties mechanical properties and thermal insulation are good. Accelerate the formation of the most suitable cement is calcium chloride (CaCl2)

This research aims to study the using cassava pit wastes mixed with cement to particle board walls. The Portland cement type1: fine sand: tap water ratio is equal to 1: 0.5: 0.416 by weight. The ratios of cassava pit wastes to cement are used following: 0.05 0.06 0.07 0.08 0.09 and 0.10 by weight. The cassava pit wastes are crushed by plastic plastics granulators (pass sieve no.4). The casting of particle board walls use the compression machine in room temperature (30 – 35 degree of Celsius) and control 0.75 g/cm3 of density. The TIS 878-2537 standard (cement bonded particle board: high density) is followed to test the properties of particle board wall. Resulting the cassava pit wastes mixed with cement can cast to particle board walls and have good properties especially the thermal insulation property.