This research is to develop and experiment the hybrid solar dryer by using cultivated banana as the ingredient in the experiment. The objective is to design create and test the hybrid solar dryer that using heat energy with infrared heater. The result from the experiment of drying cultivated banana at night-time by using heat energy from infrared heater is found that at night-time experiment cultivated bananas moisture is decrease more than at day-times experiment for 61.25 %. The temperature inside the hybrid solar dryer at night when using heat energy from infrared heater is at 49.1-55.0°C. Using heat from sunlight together with infrared heater cause the cultivated bananas moisture to decrease better approximately 27 % when compare to drying with heat energy by only sunlight.

In this study we investigated the effects of Sm2O3 addition in ceramics 0.93(Bi0.5- x/0 . 9 3Smx/0 . 9 3Na0 . 5 ) TiO3 - 0 . 0 7 BaTiO3 by mixing solid oxide solutions. The crystalline properties of the X-ray diffraction and ferroelectric properties were studied from the P - E loop. The physical properties showed that BSNT-BT ceramic density increased and the percentage of shrinkage decreased due to the increase of the amount of Sm2O3. Moreover it was found that the results were consistent with the structural study for sintered samples at a temperature of 950 °C for 7 hours. It can be determined that the BSNT-BT ceramics have a perovskite structure which is like the main structure of ceramic type BNT. Dielectric properties and dielectric losses at room temperature showed that when increasing the amount of Sm2O3 in BSNT-BT ceramics the dielectric and low dielectric loss were consistent with reduced material resistance. Further the ferroelectric test found that BSNT-BT ceramics improved the ferroelectric properties when increasing the amount of Sm2O3 in the BSNT-BT ceramics.

In this study the wind speed characteristic and evaluation of wind power generation at Samoeng district Chiang Mai were investigated using wind speed data and wind direction data during time of January 2011 to December 2011 and measured at a height of 20 40 and 80 m above ground level. It was found that the mean wind speed of 3.8 3.92 and 4.30 m/s. While the mean wind direction of 20.73% and indicating from the southwest. The mean of power density of 107 W/m2 the shape parameter (k) was 1.715 1.633 and 1.783 scale parameter (c) of 3.649 3.651 and 4.092 m/s the mean of wind shear coefficient was 0.19. The evaluation of wind energy for electricity generation by install the wind turbine of Nordex N50 from Germany and Vestas V90 from Denmark were capacity of 800 kW and 3 MW. It could produce annual electricity of 1761379 kWh and 3772400 kWh and the capacity factor show 25.13% and 14.35% respectively. Finally the results showed the northern area of Thailand was suitable for wind power development in further.

This paper presents a mathematical simulation to compared to operations a small distributed photovoltaic power plant in the distribution system. Practices transmission of electric power by small distributed solar energy With the PVSyst and IEC 61724 mathematical modeling programs the main objective was to study the % performance ratio photovoltaic power plants 5.95 MWp connected in the distribution system of the Provincial Electricity Authority voltage level 22 kV. Therefore this paper is presented as a mathematical simulation compared to operations a small distributed photovoltaic power plant in a distribution system. The results of the study show that the operation of small distributed solar power plants increases the efficiency to be able to produce the maximum electricity and continuously. The system was able to produce the highest power of 8954.9 MWh/year and had an average annual efficiency ratio of 77.84% receiving the highest solar radiation intensity and the highest annual total energy output of approximately 1837 kWh/m2

This research study analyzes the problem of waste water from the burning of palm trees which are used as fuel for power generation of palm ash. It is used to ferment biogas as a fuel for power generation where a large amount of wastewater from the gas digester is completed. The wastewater is then pumped out of the gas digester. Biological in large quantities Therefore to study the analysis of wastewater to find a method for designing a wastewater treatment system from high voltage systems from the corona discharge principle when adding ozone it is necessary to analyze the chemical effects of the wastewater according to the standard values of the Department of Industrial Works.