This research is a study of the optimum heat temperature for baking sintered castings for burnout removal of EC 500 type ash wax from cast mortar. Improving jewelry casting process to reduce waste from silver jewelry production process. By studying the temperature of the mortar. To burn remove wax from the mortar and clean the gaps. Then try to bring silver water instead of metal casting. The results of a baked casing study using the EC500 housing prototype from the study showed that the EC500 wax material is melted from all solids to ash wax by heating at 850 ° C to burn. Remove ash wax which makes the cavity clean. When the casting was casted with 925 sterling silver the most complete workpiece after the improvement of the waste jewelry casting process was found to be 1 piece 1 percent 99 pieces or 99 percent.

This research is to study the recycling of residue clams shell from Mahachai Samutsakorn Thailand. This waste was collected from canned clams industry and it can be recycled as the composition of Mon brick instead of the rice husk. The study of clams shell composition found that Calcium was main composition as 98.50%VS. The moisture and ash content was 0.88% and 58.27%TS respectively. The works methodology is using ash from clams shell incinerated at temperature 900 1000 1100 and 1200oC in 5 hours respectively instead of rice husk in Mon brick processing. The fabrication of Mon brick was in size 5x5x5 cm adding ash from clams shell intead of rice husk. The result found that increasing the temperature to incinerate clams shell ash instead density and compressive strength increased while moisture and water absorption deceased. When Mon brick was fabricated in standard size at 6x15x3.5 cm the changed material characteristics was in the same trend as previous size. Mon brick in standard size adding 100% clams shell ash instead of rice husk had density 2.63 g/cm3 moisture content was 2.86% water absorption at 1 and 24h was 17.40 and 20.16% respectively and compressive strength was 0.52 MPa. These characteristics was according to standard of Engineering Institute of Thailand. It can reduce the cost of rice husk in Mon brick factory 28800 bath/year while the waste from canned clams factory could be reduced 20.94%.

The purpose of this research was to investigate the optimum heat temperature for the EC500 wax cured basecoat extrusion from all castings without waxing in the mortar. To reduce waste when the casting mortar through the casting process Silver Sterling 925 silver jewelry company Muang District Chiang Mai where the waste is caused by waxing outflow. The imperfections and leave waxing inside. Experiment with high temperature heat in mortar. And analyze the quality of work surface after casting with microscope. To find defects such as droplets and porosities caused by a range of temperatures. Temperature of baking mortar There is a difference from the conventional waxing mortar temperature. That is outflow of EC500 type wax. In the mortar to live. High heat The results of the 100 sample EC500 wax samples were tested at a temperature of 25 ° C. The mortar temperature was 700 ° C. 60 percent of waste was found the mortar was laid at 750 ° C 54 percent of waste was found. The mortar temperature was 800 ° C 32 percent waste was found the mortar temperature was 850° C Detecting 1 percent waste. The results of the study show that heat temperatures of up to 850 ° C can solve the problem of casting sterling silver alloys from the EC500 wax model. Finds the least waste.

การวิจัยฉบับนี้ได้กล่าวถึงการลดระยะเวลาการทำแม่พิมพ์ยางซิลิโคนโดยเร่งความแข็งด้วยอุณหภูมิต่ำ เนื่องจากแม่พิมพ์ยางซิลิโคนใส สามารถเก็บรายละเอียดของชิ้นงานได้ดีและสามารถมองเห็นชิ้นงานด้านในได้แต่แม่พิมพ์ยางซิลิโคนใสใช้เวลาในการแข็งตัวนาน จึงได้ศึกษาและทำการทดลองนำเอาอุณหภูมิความเย็นเข้ามาช่วยในการเร่งการแข็งตัวของซิลิโคนใสโดกำหนดอุณหภูมิเป็น 3 อุณหภูมิ ประกอบด้วย 10 5 0 องศาเซลเซียล แต่อุณหภูมิแบ่งเป็น 3 ช่วงเวลา ประกอบด้วย 2 3 4 ชั่วโมง จึงทำการการทดลองขั้นต่อไป จากการทดลองโครงการลดระยะเวลาการทำแม่พิมพ์ยางซิลิโคนใสโดยเร่งความแข็งด้วยอุณหภูมิต่ำเพื่อหาอุณหภูมิและช่วงระยะเวลาที่เหมาะสมในการเร่งความแข็งของซิลิโคนใส พบว่าที่อุณหภูมิ 5 องศาเซลเซียล ช่วงระยะเวลา 3 ชั่วโมงมีค่าความแข็งใกล้เคียงกับมาตรฐานและมีความเหมาะสมที่สุด เนื่องจากผลการทดลองพบว่าอุณหภูมิและระยะเวลาที่เหมาะสมที่สุดนั้นสามารถลดระยะเวลาการแข็งตัวของซิลิโคนใสได้ 6 ชั่งโมงและมีประสิทธิภาพใกล้เคียงกับชิ้นงานมาตรฐาน

The purpose of this research was to study the temperature of burning surf clam shell for soil quality improvement. The experiment was divided two parts 1) the study of the optimum temperature for calcium oxide production by burning 800 900 1000 and 1100 °C 2) the study of using calcium oxide to improve soil qualities of acidic soil and saline soil. The parameters used in the analysis included elements of soil particles soil moisture pH conductivity total content nitrogen phosphorus and potassium. The results showed that the optimum temperature for the production of calcium oxide was 1100 °C since it provided the highest calcium oxide content of 90 % by weight. After applying calcium oxide into acidic soil the composition of soil particles was changed from sandy clay to sandy clay loam. In contrast the soil particle was not changed but the proportion was changed in saline soil. It was also found that calcium oxide reduced soil moisture and influenced the acidity of soil by increasing the pH from 3.39 to 6.92 in acidic soil and 6.49 to 9.11 in saline soil. In addition it was found that the electrical conductivity of the soil was related to salinity. In acidic soil the conductivity of before and after inputting calcium oxide were 0.87 and 1.24 dS/m respectively. In the case of saline soil the conductivity of before and after improvement were 14.37 and 18.80 dS/m respectively. Besides it was found that the total content of nitrogen phosphorus and potassium were reduced after the experiment.