Run flat wheels for small armored regular trucks have been re-developed by transformation from the original metallic material to compound materials polymer group materials as important raw materials then added with aluminum oxide powder to achieve higher strength and wear resistance. The research was performed by using reverse engineering processes including designing and analysis with finite element methodology with the SolidWorks Simulation program and comparing the analyzed results with outcome experiments. Several variables used for the design and analysis were 1) the optimal width of the run flat wheel at the parts both attached to the wheel pan and contacted with the inner rubber surface 2) internal and external radiuses. The internal radius is depending on the size of the wheel pan and the external radius is a variable that determines the height of the Run flat wheel. 3) the shape designed to prevent wearing of the inner tire surface of the run flat wheel and the shape of the run flat reel in the part contacted with the wheel pan. This wheel pan part is such uneven inclined area which is difficult to hold. 4) a design locking kit for tightly fastening the run flat reels to the wheel pan 5) the material used to create the run flat wheel and 6) tire pressure. The run-flat wheels were then designed and constructed in a modular form of 3 parts for ease of the wheel pan assembly. In designing pattern the assembling run flat reels had to be fit into the characteristics of a small armored regular truck wheel pan convenient to assemble with a wheel pan and tightly attached without looseness or deformation when impacted. The run flat reel gripping device has been redesigned to lock all three run flat parts together. It brought up the impact resistance from body weight was at 50 km/hr.

This research analyzes the parameters affecting the penetrating resistance of shells on the armor surface by the finite element method. In this study the results were compared with real bulletproof armor firing tests and finite element simulations. modeling of bulletproof armor using Solid Works program. Creating and simulating armor firing pattern using ANSYS Explicit Dynamic program. damage test is based on National Institute of Justice level 3 standards with material of the ammunition is 7.62 mm tungsten carbide (WC) and speed 847 + 9.1m/s. there are two types of bulletproof armor used in this simulation 1. SKD11 2. Aluminum AL7075. The simulations is into 1 category Simulation of stacked armor plates. The sizes of the armor plates are 6 8 and 10 mm and the angles of firing of bulletproof armor are 0 30 and 45 degrees. result of this simulation armor thickness and firing angle are factors of penetration resistance. when the angle of the projectile is tilted it will cause the projectile to deflect reducing the frictional contact from the impact.

This research analyzes the parameters affecting the penetrating resistance of shells on the armor surface by the finite element method. In this study the results were compared with real bulletproof armor firing tests and finite element simulations. modeling of bulletproof and bulletproof armor using Solid Works program. Creating and simulating armor firing pattern using ANSYS Explicit Dynamic program. damage test is based on National Institute of Justice (NIJ) level 3 standards with bullets the material of the ammunition is 7.62 mm tungsten carbide (WC). there are two types of bulletproof armor used in this simulation 1) SKD11 2) Aluminum AL7075. The simulations is into 1 category Simulation of stacked armor plates. The sizes of the armor plates are 6 8 and 10 mm and the angles of firing of bulletproof armor are 0 30 and 45 degrees. result of this simulation armor thickness and firing angle are factors of penetration resistance.

This research has been studied and created the ceramic armor plates with composite materials that been proceeded from drying compression process with mold. Al2O3 that use for compression forming has been analyzed by SEM and XRD. It showed that compound and powder particle led to 5 microns-sized. It had flat circle shape of colundum Al2O3 and hexagonal crystal system. Upper punch of molding has designed and analyzed by FEA to 2 forms first form was the end-point had flat face and second form was the end-point had a convex. Upper punch had been made from AISI 52100 with 64 HRC ceramic armor plate had been produced by compression at 1000 kN which had hexagon side shape of width 25.98 mm for each side or height between parallel side of 45 mm. Al2O3 had been compressed to investigate the distribution of relative density for the height after compression of 15 and 30 mm by analyzing 4 cases that consist of 1.) a case of smooth face of upper punch which has green compact of 15 mm height 2.) a case of convex face of upper punch which has green compact of 15 mm height 3.) a case of smooth end face of upper punch which has green compact of 30 mm height 4.) a case of convex face of upper punch which has green compact of 30 mm height. The result of this study is to propose the distribution of relative density on horizontal axis as it is a relative radius and vertical axis is a relative distance from the upper punch that is an axis of moving down action. This study found that the distribution of relative density form had analogous form for these 4 cases the density had few differences and had high value at the town edge of green compact due friction between die wall and upper punch. The ceramic armor plate has been set up on UHMWPE fiber plate and used special silicone to connect them together then will get the NIJ 3 standard of ceramic armor plate with Composite materials