The effect of chain extender on the improvement of molecular structure and rheological properties in shear and elongation of recycled poly (ethylene terephthalate) was studied. The results suggested that addition of chain extender increased the molecular weight and broader molecular weight distribution of recycled poly (ethylene terephthalate). A gel fraction of cross-linked material was formed and the amount of gel content was dependent on the amount of chain extender used. Moreover it was found that the addition of chain extender increased the shear and elongational viscosities of recycled poly(ethylene terephthalate). The increases of viscosities were explained that the extension of poly (ethylene terephthalate) chains caused a reduction in chain mobility. As for the tensile properties at the molten and solidified state it was seen that the increase of tensile properties resulting from chain extender rose up to 0.6 wt% before it reduced at the chain extender loading of 0.9 wt%.

This research report of the Aluminum Can Recycle Machine Project is contrived the experiments at Rajamangala University of Technology Phra Nakhon by the hydraulic pressure. Nowadays the cans make by luminum material very useful in several liquid packaging industries. When people consumed the liquid inside the cans then the cans are worthless. But the cans can be recycling from the waste material. Although we have to reduce the waste materials to follow our world as improvement. From the reasons that we mentioned we decided to start the Aluminum Can Recycle Machine research project to keep him or her eager to put the cans to the machine for consumer then encourage them by giving something back such as a candy or a rubber etc. The system working by a PLC it controls the hydraulic pressure receives the sensor signals and displays status via the 7-segment panel. The machine accepts the standard beer can and the soda can for 10 cans a time in a slot when consumer put the cans into the can receiver block the machine gives a candy back to a consumer. After a receiver-block has the 40 cans inside the machine pressing the cans at once then releasing it to collector block.

The objectives of this research are to study the production to find the proper ratio to test the properties to suggest the implementation and to transfer the technology of high strength milk carton waste artificial wood mixed with poly ethylene terephthalate (PET) plastic waste. The ratios of this artificial wood included milk carton waste: PET plastic waste equal to 80:20 75:25 70:30 65:35 and 60:40 by weight. The milk carton and PET plastic wastes were grinded though sieve no.4. The artificial woods were casted by hot compression with 180 degree of Celsius for 5 minutes. The samples tested follow the TIS.966-2547 standard. From the results the 60:40 of ratio was the proper ratio which can pass the standard. The increasing of PET waste effected to decrease the density moisture and swelling of properties. In case of bending strength elastic modulus and tensile strength perpendicular to surface the increasing of PET effected to decrease their properties. The developed artificial wood mixed with milk cotton waste and PET plastic waste has the possibility to implement in decoration and construction both interior and exterior wall building. These results can register the petty patent and write the research paper which to transfer the technology.