This thesis presented the design and construction of an adaptive active band-pass filter by using a tachometer circuit. The main part was the multi voltage-mode filter circuit based on an operational transconductance amplifier which could automatically adjust the center frequency to adapt to the input signal frequency by the tachometer circuit. The frequency error value in the center frequency was set to be ≤ 3% of the input signal. Furthermore the proposed filter could support the input signal in the frequency range of 10 Hz - 10 kHz. From the simulation and experimental results of the proposed prototype filter it could respond to the frequency according to the theory of the band-pass filter and the error in choosing the center frequency which was 1.45 % and 2.6 % respectively (below the set error value of 3 %). Therefore the proposed filter could be used for real application. The working principles of the proposed prototype filter could also be applied to the noise attenuation circuit of an electrocardiogram machine. Moreover this research could be used as a guideline study for those who want to develop other types of adaptive active filters for higher efficiency.

This paper presents the design of a power harvester for passive RFID Tags. An impedance matching circuit chooses a high-pass L network inserted between the antenna and rectifier circuit to maximize the power transferred to Tags using an impedance transformation technique. A simple circuit including only a shunt inductance was selected as a matching. The rectifier utilizes a Self-Vth-Cancellation (SVC) circuit is an archived self-threshold voltage cancellation and self-power regulation function with a simple circuit design. An antenna is modeled as an RF source with a series impedance Zs of 50Ω while the rectifier is modeled as a load impedance ZL which is estimated from the process and design parameters of the NMOS and PMOS transistors used in the SVC rectifier. As the combined circuit was simulated using input in the UHF band of 953 MHz and the devices’ model of the 0.35μm CMOS technology. The simulation results were compared with the single-stage rectifier of the SVC technique in the issue of the Power Conversion Efficiency (PCE). The achieved DC output of the rectifier yields the power conversion efficiency of 43.7% at input RF power -10.22dBm while a DC output voltage of around 643.8mV and a current load of 64.4μA.

The objectives of this study were to produce an interactive short film “Everyone does it” to assess the media suitability of an interactive short film “Everyone does it” and to assess the audiences satisfaction with the medium of the interactive short film “Everyone does it” using 2 groups of samples 1) a group of experts to assess the suitability of 3 people divided into experts. opus and editing; 2) a group of high school students Nawaminthrachinuthit Benchamarajalai Mathayomsuksa 6 Room 2 30 people were obtained by using a specific method. by using questionnaires to collect data The statistics used to analyze the data were mean and standard deviation. The results showed that Interactive short film “Everyone does it” was overall very appropriate (=4.20 SD=0.53) and viewers towards interactive short film medium. “Everyone does it” overall satisfaction was at a high level (=4.34 SD=0.65)

Data visualization technology is going to grow in importance in the short term. This technology is a concept that describes any effort to help people understand the significance of data by placing it in a visual context. Patterns trends and correlations that may go unnoticed in text-based data can be more easily exposed and recognized data visualization software. The purpose of this research is to develop the interactive dashboard of Thai temple data in Nonthaburi province and finding out the users’ satisfaction with the dashboard. The tools used in the research were Data Studio software online questionnaires mean and standard deviation statistics. The results of the overall satisfaction evaluated by participants of 100 users who were people living in Nonthaburi province is at the highest level at a mean of 3.80. Therefore the results of this research can be applied to any Office of Buddhism that face with similar issues of data analytics

This research studied the factors that affect the efficiency of phosphate reduction in the wastewater of the washing process with CaCO3 and CaO produced from eggshell and mussel shell. The study found that the optimum condition for adsorption when using CaCO3 from eggshell is to adjust the pH to be equal to 10 take 15 minutes to absorb and add 1 gram of sorbent which can reduce the phosphate content by 25 percent and when changing the adsorbent to CaO the optimum condition for phosphate removal is to adjust the pH to 7 take 15 minutes to absorb and add 1 gram of adsorbent which can reduce the phosphate content by 24 percent. The optimum conditions for adsorption when using CaCO3 from mussel shell were to adjust the pH to 10 take 45 minutes to absorb and add 1 gram of sorbent which can reduce the phosphate content by 25 percent and when changing adsorbents to CaO the optimum condition for phosphate removal is to adjust the pH to 10 take 15 minutes to absorb and add 3 grams of adsorbents which can reduce the phosphate content by 24 percent. In addition when studying the adsorption of impurities in the wastewater such as conductivity turbidity COD and BOD it is found that the optimum reduction conditions can reduce the impurities of the parameters that mentioned above were 19.32 2.60 54.77 and 16.67 percent respectively. CaCO3 and CaO produced from eggshell and mussel shell can be used to absorb impurities in wastewater before releasing into natural water sources.