This thesis proposes a method for detecting harmonics current in the adaptive active harmonic filter with Recursive Least Square (RLS) algorithm. The proposed method is based on the theory of noise cancellation adaptive filter. Originally the theory was used for audio signal processing but this thesis is applied to the harmonic current detector of an active harmonic filter. The principle and construction of the harmonic current detector in the adaptive active harmonic current filter with Least Mean Square (LMS) algorithm and Recursive Least Square (RLS) algorithm are presented to compare the efficiency of both algorithms. Then simulate these two algorithms with Matlab-Simulink program to simulate the three case studies. All three case studies that simulate are generally available in industrial plants. The simulation results show that the harmonic current detector in the adaptive active harmonic current filter with the LMS algorithm and the RLS algorithm can detect the harmonic currents in the power systems. However the RLS algorithm is more efficient and has less error value than the LMS algorithm. Therefore it is confirmed that the RLS algorithm proposed in this thesis is appropriate to use with the adaptive active harmonic current filter to really work in the industry.

In FinFET-based VLSI designs heat issues from increase of driving current with temperature and self-heating effect profoundly influence the circuit performance and reliability. This work evaluates the performance of FinFET-based combinational circuits considering BTI stress and thermal effect of supply voltage and frequency variations. The proposed simulation framework is applied to selected benchmark circuits implemented with the 14-nm tri-gate bulk FinFET technology. The experimental results reveal that as temperature increases BTI aging delay increasingly worsens yet it is overridden by performance gain from the increase in driving current. We also prove that BTI degradation is dependent on power supply and frequency through their thermal impacts. Further we introduce a DVFS based power reduction approach that scales down the supply voltage of hot circuits to maintain the performance. The results show that power reduction yielded from the proposed technique is larger for all circuits working at higher ambient temperature (as large as 66% in some experimental circuits working at 20 oC above the baseline ambient temperature) with a slight decrease in BTI degradation.

This thesis offers the design of the impulse generator 1.2 / 50 μs which applies for studying and generating the lightning impulse to test the endurance of the electricity transmission line. Moreover this study analyses the factors which affects the impulse waveform by using Orcad program. The parts of prototype device can find in the general market. After the efficiency test of the electricity transmission line the result shown that the device should have the high capability to endure the temporarily high impulse. This minimizes the dangerous from the electricity system.

This project report proposes a design and construction of model of protection equipment for three-phase transmission line by voltage relay for protect. By protection equipment can protect the transmission line from over voltage and under voltage on the transmission line The objective of design and construction model of protection equipment for three-phase transmission line. The objective for construction model of protection equipment for three-phase transmission line. For understand power system protection principles. And understand using to protection equipment for three-phase transmission line correct. From experimentation model of protection equipment could protect over voltage and under voltage on the transmission line

This research is studied the design and contract the electronic generator from Solar cell integrated with electrical at home in the rural area. The design is combined between solar cell and electrical at home. The mutation from solar cell to electric power is the clean and green energy when it is compared with normal processes to generate the electric power. Additionally it’s also less impacts to environment and sustainable. In the normal architectural model of solar cell generator the engineer will design the power storage at its battery for one day using with condition of the solar cells need to receive the sun light in the whole day. If some days the cell cannot get enough sunlight when it’s bad weather the battery also cannot supply power as in its usual. With this new innovative energy supply integration between solar cell and electrical at home it benefits to the energy consumers to get the energy for whole day continually and also reduce the pollution from the normal process electric generation.