This paper presents a study of comparison of PWM power rectifier between 6 Pules and 12 Pules converter topology by small hydro turbine Generator (20kW) is power supply and Compare harmonics Current feed in the systems. Both converter connected Permanent Magnet Synchronous Generator (PMSG) and Voltage Regulator Control at 700 V. The control system by Decoupling Control and Conventional PI Control for control parameter PI value by Nicole-Ziegler method. Analysis for Performance of the system presented a mathematical model with Matlab/Simulink program. The result of simulation have value less than 5 percent of ripple voltage and Voltage Control continuously. Converter 12 pulse have harmonics Current value feed in the systems less than converter 6 pulse. This Case study can apply using PWM power rectifier control in future work

This paper presents a study of low-frequency oscillations in compensated electric power systems with Flexible AC Transmission System of the power system frequency using PSAT Tool box To assist in the analysis of the stability of the system When the power transients in power systems is simulated By using standard IEEE 14 bus system as a case study. The Equipment that used to control the swing frequency of the is a flexible electrical power control devices or FACTS are two kinds of serial and parallel. The analysis showed that two models are compared with the time (Time Domain) and see the effect of the Eigen (Eigen Value) of the simulation results show work to see that controls are electrical flexible compensation. of low frequency oscillations in power systems in acceptable coordinates

The fault in a power distribution system disturbs the power dispatch under normal conditions therefore decreases the quality of the electric power. The single line to ground fault is an asymmetric fault that may have a high percentage chance to happen. The kind of fault changes power and voltage dramatically. The size of the phase voltage decreases which affect the economic damage of the system. This paper presents an analysis of grounding systems to reduce voltage drop in a power distribution system by using the technical analysis system in case of one phase to ground fault. The objective is to minimize voltage drop for users using the simulation with single line to ground fault in distribution system voltage level at 22 kV PEA’s test system. The simulation utilizes the EMTDC-PSCAD program. The results show that the grounding method can reduce the voltage drop and reduce the damage of the economic system

The study aimed to investigate and compare the back-pain level peak-to-peak voltage and period time of Electromyography (EMG). The sample of this study was 31 patients of Yasothon Hospital. The instrument consisted of an electrocardiography (EKG monitor). For statistical analysis t-test and f-test were employed. The findings revealed that mean is The Back-Pain level of most patients was 2 (35.5 %). The peak-to-peak voltage of Back-Pain levels (1-5) were 0.11 0.12 0.21 0.25 and 0.20 mV. While period time of Back-Pain levels (1-5) were 0.85 0.86 0.86 0.62 and 0.68 s. respectively. The peak-to-peak voltage of Back-Pain levels (1 and 2) were different levels (3 and 4) at .05 level of significant. In addition the period time of Back-Pain level (4) was different levels (1 2 and 3) at .05 level of significant

Electronic load is an importance part of power supplies testing system. For non-electronic load type it is required to replace a resister with a new one leading to complicated working procedure. The modern power electronic technology is employ to solve this problem. The electronic load can vary the value following user command. Imported electronic load is costly leading Thailand to have a balance of trade deficit. This article proposes design and implement of an economical cost 30V 1 k DC-Electronic Load controlled by Microcontroller. The tested results can confirm the validity of this proposed electronic load