This research was concerned with the fiber separation and non-woven preparation form sugar canes leaves. The separation process was carried out by chemical pulping method at 100 degree Celsius. In order to study the suitable condition for separation process the concentration of sodium hydroxide ranging from 0 -20 grams per liter and boiling time 15 30 45 60 75 90 105 and 120 minutes were performed. Web formation process was performed by wet laid method and polyvinyl alcohol was selected as binder in web bonding process. in order to study the suitable amount of binder in bonding process concentration of polyvinyl alcohol ranging from 1 2 4 6 8 and 10 % w/v coated on web surface and cured at 120 degree Celsius. Bursting strength as well as physical properties evaluation of non-woven fabrics was performed. For antimicrobial finishing process was performed by spray method and pad method. The finishing result was evaluated by MTCC test method 147-1998 (Qualitative) and 100 -1999 (Quantitative) The result was found that appropriate condition for fiber separation was recommended as follows: the amount of sodium hydroxide of 10 grams per liter and boiling time 60 minutes. The suitable amount of polyvinyl alcohol for web bonding process was 2 % w/v. Bursting strength of non-woven fabric was 53 kN/m 3 and padding method was a suitable method for antimicrobial finishing (antimicrobial area 0.3 millimeters )

The Purposes of this research were to study and compare the problems and the requirement of students were arrangement the educational administration in instructor content teaching method measurement and evaluation educational administration building place and audiovisual aids and service in Faculty of Industrial Textiles and Fashion Design. The samples were used every fields and every years students in Faculty of Industrial Textiles and Fashion Design who study in 2008. The tools used consisted of 400 questionnaires of samples group. Statistics used to analyze the data were frequence value percentage value standard evaluation analysis of variance T-value and F-value in hypothesis test and differential comparison.The results were as follows: 1. The students of the faculty of Industrial textile Fashion design satisfied in education management i.e. instructor content teaching method and measurement and education was high level. It was found that the teaching method was the most satisfactory.!t showed X= 3.81 and S.D = 0.67 The satisfaction of students in education administration building place and audiovisual aids and service was average level. The building place was worst satisfied. It showed X= 2.67 and S.D = 0.81 1.The open-ended questions of this research showed that the requirement about building place was the most interesting especially the clean restroom and maintenance it showed 23.13% and small sport area was 16.33%. The students also commented that the sport area should not be a car park for the instructor. The third comment was the dirty canteen that showed 15.65%. The student complained that the canteen should contain various food. 2.From the comparative analysis result in problems and the requirement of students were the administration study of the Faculty of Industrial Textile and Fashion Design as the follow the hypothesis of the research that gender education year age the study field were different no problems and different requirement statistics significance were 0.05

This study was an aim to apply patchwork and applique technique in to remnant fabrics for value added by developing the new products. It was a survey research by questionnaires tool. The study was divided into 2 steps. The first was collected the basis data for product analyzed and appropriate design to produce the prototype products. Then the prototype was displayed to sample group for acceptance in designs and patterns. The results found that the clothes/costume and zodiac designs were the favorite patterns. The styles quality and creative design were the important for buying decisions. The representative sample satisfied the prototype products in case of technique attractive design and their applicable respectively. They estimated the prototype product is over 2001 – 3000 bath/design although the previous was not over 500 bath/design. That meant these techniques were responding the relevant products and increased the household revenue.

The purpose of this study was to produce a VCD on Design and Development of Textile Products from Surin Silk for the training program entitled “Design and Development of Textile Products from Surin Silk : From Folk Wisdom to Internationalization” The instruments of the study created by the researchers were : the VCD a learners’ test an experts’ evaluation form and a questionnaire on learners’ satisfaction. Fifteen people in Surin were randomly selected for the efficiency test of the VCD. The tests measuring E1 and E2 were taken after they had learned one lesson from the VCD. The result revealed that the VCD had the efficiency at 82.66 / 84.33 which was higher than the 80/80 criterion and was rated “much satisfied”.

This research is aimed to study the conditions and obstacles of academic work productivity the knowedge and understanding of rules and regulations to achieve academic position the opinions on the academic work productivity and the need to support the academic work productivity of the lecturers of the Faculty of Liberal Arts Rajamangala University of Technology Phra Nakhon. It is a descriptive research. The research instrument is questionaire. The population are 73 lecturers from the Faculty of Liberal Arts. The statistics used in this research were percentage average mean and t-test. The results were as follows: 1. LecturersBackground : most lecturers are female44.5 year of age in averagemarried having instructor status holding Masters degree and training on academic works for 1.9 times a year. As for the type of their works they are instructional documents which have been done by themselves. 2. In term of knowledge and understanding of rules and regulations in achieving academic position: most of the lecturers of the Faculty of Liberal Arts understand the rules and regulations at the point of 11-15. The average point is 11.72. 3. The attitude for the academic work: the reason for acadenic work productivity is the need to study by themselves. The reason why they do not want to make an academic work is lack of motivation. 4. The obstacles in making the academic work: they were engaged with other works. 5. As for the need to be supported in making the academic work the lecturers required the Faculty to provide them with various means of communications such as the announcement newsletter website Circular letter with x = 4.60. 6. T-test result was found that different sex has different obstaclest at .05 level. The obstacles which are statistically different at 0.05 are overloaded works and lack of facilities.