Currently the automotive industry plays an important role on the economic growth in Thailand. As the same time the waste of automotive parts has increased as well. As a results the automotive parts made from three different natural fiber parts was studied consisting of hyacinths sugarcane and pineapple leaf fiber. By of 50 x 250 x 20 mm of mold dimension the specimens were produced under 700 W of heating stick and measured temperature by a K type of thermometer. There were 3 same proportion specimens made from: 1) sugar cane fiber: husk: latex adhesive 2) water hyacinth fiber: husk: latex adhesive 3) pineapple fiber: husk: latex adhesive in the ratio of 25:25:50 by weight which were formed under temperature between 100GC and 105°C at 5 MPa of pressure and leading to find out the bending moment ability. The test results show that the specimen made from sugar cane fiber has the highest value 5482.5 Nand 4061.11 N/mm2 of bending moment and bending stress respectively. It was more than specimen made of water hyacinth 29.84 % and pineapple fiber 65.01 %.

Molds manufacturing to produce chloroprene rubber product with carbon steel over time the mold surface will wear. From the original. The practice in the industry often uses surface coatings (Hard chrome method) or change materials to create molds. Therefore this research is to study the effect of corrosion or wear. To see the size of surface mold changed in the experiment. Based on a tolerance of 0.1 millimeters at the molding point and after molding in the actual work conditions of a 2-3 weeks sample and mold size measurement. At less than 10 times the permissible coordinate value is 0.01 millimeters. The experiment found that. The wear of carbon steel molds was formed with chloroprene rubber. It has a very small value when referenced to the tolerance coordinates which is not significantly reduced when the rubber specimen size is determined. The allowance range is 10 μm to 100 μm. Therefore the design of chloroprene rubber to make molds with carbon steel. It can help reduce production costs. Without replacing with corrosion-resistant materials or adding coatings.

Based on the research on creation of bas-relief molds for production of bas-reliefs made from boiled pineapple leafs conducted by Rachadasak Pengcum of which purpose was to help generate income for members of Pineapple Leaf Paper Community Enterprise Ban Pasang Wiwat Mueang District Chiang Rai Province it was found that the bas-reliefs need further improvements in terms of appearance and durability as well as the use of other natural raw materials to produce them. The researcher therefore has considered developing the previous research by applying other 3 valueless natural materials which include rice straw water hyacinth and banana stem skin to make bas-reliefs for different beautiful surfaces of the products. Also the quality of bas-reliefs has been comparatively investigated by surveying satisfactions of members of the Community Enterprise and visitors to the project towards the bas-reliefs made from rice straw water hyacinth and banana stem skin. The total period of questionnaire distribution was 3 months. There are 59 respondents administering the questionnaires most of whom (43 persons) are female which accounts for 72.88 per cent. The majority of the respondents (25 persons) obtained junior/senior secondary school diplomas or equivalent accounting for 42.37 per cent. 16 respondents or 27.12 percent are 60 years of age. As for satisfactions towards the bas-reliefs made from rice straw 89 times of “strongly agree” was selected whereas 126 times of “pretty much agree” 75 times of “fairly agree” and 5 times of “disagree” were marked by the respondents. Concerning the bas-reliefs made from water hyacinth 87 times of “strongly agree” was selected while 97 times of “pretty much agree” 110 times of “fairly agree” and 1 time of “disagree” were chosen. When asked about the bas-reliefs made from banana stem skin the respondents selected 77 times of “strongly agree” 99 times of “pretty much agree” 110 times of “fairly agree” and 8 times of “disagree”.

This research is to study the recycling of residue clams shell from Mahachai Samutsakorn Thailand. This waste was collected from canned clams industry and it can be recycled as the composition of Mon brick instead of the rice husk. The study of clams shell composition found that Calcium was main composition as 98.50%VS. The moisture and ash content was 0.88% and 58.27%TS respectively. The works methodology is using ash from clams shell incinerated at temperature 900 1000 1100 and 1200oC in 5 hours respectively instead of rice husk in Mon brick processing. The fabrication of Mon brick was in size 5x5x5 cm adding ash from clams shell intead of rice husk. The result found that increasing the temperature to incinerate clams shell ash instead density and compressive strength increased while moisture and water absorption deceased. When Mon brick was fabricated in standard size at 6x15x3.5 cm the changed material characteristics was in the same trend as previous size. Mon brick in standard size adding 100% clams shell ash instead of rice husk had density 2.63 g/cm3 moisture content was 2.86% water absorption at 1 and 24h was 17.40 and 20.16% respectively and compressive strength was 0.52 MPa. These characteristics was according to standard of Engineering Institute of Thailand. It can reduce the cost of rice husk in Mon brick factory 28800 bath/year while the waste from canned clams factory could be reduced 20.94%.

This research is study on influences effect of decision to use PromptPay system of Thai commercial banks. The purpose of the research is as follows. Study the confidence that effect of the choice of financial transaction services through PromptPay system. Study the marketing mix factors that effect of the decision to use financial services through PromptPay system. This research is to collect data from customer of Thai commercial banks. Thai commercial banks are as follows. Bangkok Bank Public Company Limited. Krung Thai Bank Public Company Limited. The Siam Commercial Bank Public Company Limited. Kasikorn Bank Public Company Limited. and Bank of Ayudhya Public Company Limited. The results showed that most respondents had the following: They are female. They are between 31 and 40 years old. They are single. They graduated bachelor. They are studying at the undergraduate level. They are students. They earn less than 15000 baht per month. Frequency of financial transactions is 1 time per month. They used to transfer money through mobile applications. The reason for using the mobile banking is quick and easy. and Reduce the loss of money and the cost of banking transactions are the factors that affect the choice of use PromptPay system.