This research aims to produce scrap page kaolin of brick construction. The kaolin clay ratio of 100: 0 80:20 60:40 50:50 40:60 20:80 and 0: 100 by volume Add mixed with rice husk and rice 15 percent by weight A total of seven ratios. According to standard tests or TIS. 77-2545 ordinary story brick building. The moisture content and water absorption is increasing. While density Thermal conductivity resistance flexural and compressive strength tends to decrease. The best ratio of 80:20 by volume with compressive strength 43.16 kg / cm 2 and 24.93 percent water absorption. Criteria standard of TIS. 77-2545 requiring compressive strength not less than 35 kg / cm2 and water absorption must not be higher than 25 percent. Can be used in the manufacture of brick construction including building decorative wall can be developed into products. Because skin color and beautiful

This research aims to study how to use stones Pumice Products is interlocking block for community development. The mixture ratios of Portland cement type1: sand: quarry dust: pumice rock fragments: water that there are 5 ratios. The products were tested by the community TCPS 602-2547 (2004) (Thai): interlocking block. The results showed that interlocking block of stone pumice much a compressive strength and thermal conductivity under a block of stone pumice less. The water absorption is increased When a block of stone pumice much. The optimum ratio and the use of waste rock Pumice highest ratio of cement to stone dust on the stone Pumice water in a 10: 6.4: 0.6: 0.45 to 10: 6.1: 0.9. 0.45 by weight.

The topic of this research is the study of the changes of tourism maket in Thailand that has an effect on the tourists behavior. The problem concerns the decision making of tourists the information accessibility and the attitude of tourists the expectation and the satisfaction concerning Medical tourism. This qualitative research explained the tourists attitude and the creation of competitive advantage from customers perspectives as tourist in the medical tourism business. In the depth-interview of tourists the decision making process the expectation and satisfaction of customers in medical tourism were explained and measured based on the understanding of customer and the pre/post experience of the medical tourism service. The objectives of this research were to create the service repurchasing Internet information sharing and the media accessibility for tourists and perspective who would like to travel in Thailand and other related topics concerning medical tourism in Thailand. In conclusion the group of author argues that the information accessibility in this medical tourism to local and global tourists are limited and the business owners and others should play important role to effectively present the idea and concept of the medical tourism to the prospects and the existing customers in order to generate more income and gain more distribution channels. Finally the group of author identify the creation of the competitive advantage of medical tourism by reacting to the customers requests and requirements and also the information providing and accessibility throughout the media channels. Moreover creating the brand image and cooperating with government for the medical tourism theme under the government support in thecurrent national development plan would make substantially different from the existing situation for all of the players in this market.

Education and research is being Develop material that is mixed between rubber and rubber tree’s leaf for product designing. For product design This study is the use of a water timber with a rubber material. For use in product design Type of use and home decoration. In order to achieve the objectives of the research. The research was conducted by researchers at various stages. Data analysis and presentation. In the first part of the research questionnaire has been prepared for the development of product design. The study showed that the structure and the rubber leaves are fragile. It has adopted a water timber to merge. The experimental trial showed that the water timber formwork period is a major cause of water in the rubber sticking to the timber structure. When the latex has chemical and log Waldemar Carlo Night a period of use should not exceed three months at a water timber should be done with low viscosity. The color of the water timber must have a milky white. The collected data before designing it. The researcher has prepared all the tools of the 150 series found that most respondents as guest female age range 25-45 years as the rubber leaves of 94 percent 62.7 opine that the rubber leaves can be. made products of 5-10 species and the collection of data about materials latex with a rubber to make products from those carrying ask 150 people are of the opinion that it should make products partition 32.7 percent secondary. followed by the production of upholstered furniture 20.7 percent and 14.7 percent from the wallet to store data the researcher chose to put the material into a water timber with a rubber curtain room couch and wallet. When the prototype the researchers collected data on products made from latex and rubber leaves a series of 100 questionnaires showed that most of the respondents were female. Between the ages of 25-45 years the average undergraduate. There were government officers And have a monthly income of less than 5000 baht by the majority of respondents thought that. Rubber and rubber leaves the work piece is in good shape. Durable medium Can be used to make the products have 10-50 species with characteristics of both latex and rubber leaves. And all should be improved The research found that people are more interested in a piece of sheet material from a water timber with a timber. For product design Due to a combination of natural materials as a new material with a rubber-patterned rubber leaves a unique structure. It can also be improved by a more specific latex formulation. To be able to make the product even more.

This research study design and furniture from wood waste material in the furniture industry for residential medium. Study materials made from wood chips in the industry to create commercial benefits. And study furniture styles for residential medium which has a lot of current. Including testing standard furniture from wood chips in the industry standard for the structure of the furniture design. The model home furnishing materials wood waste material from interviews with experts in the design. Conclusions regarding the manufacture and design of a study to determine specialists as appropriate. Researchers have taken a home furnishing is correct. Then residents of the residential-sized survey about home furnishing 30 who works as follows. Front of the house. The average was 4.6 most of the comforts average was 4.6 most security average is 4.75 most of the design value is 4.7 the overall satisfaction is at its greatest. The test standard furniture. The testing of materials furniture grass. Static force acting on the basis of a test ride. The static force exerted on the backrest. In the test criteria. The static pressure test on the arm to the side and the force acting on the wing surface at the head. In the test criteria. The static pressure test on the press arm. In the test criteria. Criteria to test the force exerted on the seat and the backrest against the switch. In the test criteria. Force acting on the basis of the test. In passing the test. The impact tests and shock at the surface of the bracket. In the test criteria. Criteria for testing for the one side then drop free In the test criteria.