This project aimed to special project were to design and construction multimedia games and to assess the students minds towards multimedia games. The data collected from 60 students who was students at Karun Sueksa School Nonthaburi province by using the questionnaires. The data analysis was frequency percentage mean and standard division. The results of the study showed that: 1)the content of the media multimedia games dabbed in the mathematical land was satisfied. 2) The quality of the media multimedia games dabble in the mathematical realm is satisfied at a high level.

This study applied the kunzelstab penetration Test (KPT) or Light Penetrometer to examined penetration resistance values geological profiles and estimate shear strength properties of soils. KPT tests were carried out on steep slopes that exhibit potential slope movement in Chiang Rai province. The principal uses of the KPT are examined; i.e. correction method for N’KPT’ soil profile and allowable bearing capacity of soil foundation. KPT tests were conducted at 13 boreholes each measuring 4.00 m long along the crown of the slope. The results indicated the compacted layer and located the firm layer of soil foundation. The average allowable bearing capacities were 1.53 t/m2 at depth of 1.00-5.00 m and 17.06 t/m2 for 5.00-6.00 m depth respectively. Furthermore this paper presents an analysis of the stability of a slope with the shear strength parameters of the soil and the geological profile were defined based on the results of KPT. The results of factor of safety were below the stable value for analysis cases with groundwater table. Test results demonstrate the usefulness of the KPT method in geotechnical investigations to estimate soil profile and bearing capacity efficiently and economically. This approach is also less time consuming compared to other geotechnical site investigation methods.

System of The Provincial Electricity Authority using the grounding wire connected between the cable end and Surge arrester format it is connect the cable from the end of the cable set to the end of the Surge arrester and grounded wire that splits the ground between the cable connecting point and the Surge arrester format it is a separate grounding connecting point to the cable end and Surge arrester on both sides of cable riser pole by Computer program. Resulting from computer analysis and the comparison of line setting found that if setting line lead to ground and join with ending cable line and Surge arrester lead in to line voltage drop less than setting line to ground with separate line and Surge arrester.

The objective of this research is to develop the high corrosion resistance and good thermal insulation precast adobe wall panels mixed with natural latex. The 6 ratios of Portland cement type1: clay: rice husk ash: straw: rice husk:waterproofed liquid: natural latex: tap water were designed including: 1: 3: 0.3:0.02: 0.02: 0.02: 0: 0.4 1: 3: 0.3: 0.02: 0.02: 0.02: 0.05: 0.4 1: 3: 0.3: 0.02: 0.02: 0.02:0.1: 0.4 1: 3: 0.3: 0.02: 0.02: 0.02: 0.15: 0.4 1: 3: 0.3: 0.02: 0.02: 0.02: 0.2: 0.4 and 1:3: 0.3: 0.02: 0.02: 0.02: 0.25: 0.4 by weight. The precast adobe wall panels castedas same as the common concrete and reinforced by the bamboo. From the resultsthe proper ratio of precast adobe wall panel mixed with natural latex was 1: 3: 0.3:0.02: 0.02: 0.02: 0.1: 0.4 ratio. The properties of the proper precast adobe wall panelincluded density 1810.83 kg/m3 water absorption 17.16 % compressive strength 15.13MPa bending strength 3.01 MPa thermal conductivity coefficient 0.234 watt/m.Kelvin. Moreover the proper precast adobe wall panel mixed with natural latex also was verified by TIS.2226-2548 with properties of impact resistance deflection and hardness in medium duty (MD) level. The proper amount of natural latex effected the precast adobe wall panels to improve the mechanical properties including: increase the compressive and tensile strength decrease the density thermal conductivity coefficient and water absorption.

The objective of this research is to develop the precast adobe wall panel with high corrosion resistance and good thermal insulation. The ratio of Portland cement type1 clay rice husk ash straw rice husk waterproofed liquid and tap water was mixed and casted as same as the common concrete and reinforced by bamboo. From the results the proper prototype ratio of precast adobe wall panel was Portland cement type1: clay: rice husk ash: straw: rice husk: waterproofed liquid: tap water which equal to 1: 3: 0.3: 0.02: 0.02: 0.02: 0.4 by weight. The properties of the precast adobe wall panel prototype included density 1797 kg/m3 water absorption 16.70% bending strength 2.61 MPa compressive strength 21.40 MPa thermal conductivity coefficient 0.314 watt/m.Kelvin. Moreover the precast adobe wall panel prototype also was verified by TIS.2226-2548 with properties of impact resistance deflection and hardness in medium duty (MD) level. These straw and rice husk effected the precast adobe wall panel to decrease the density bending strength thermal conductivity coefficient and increase the compressive strength and water absorption.