This research has objectives to study the production to find the proper size of steel wire mesh to test the properties and to study the implementation of high strength and thermal insulation cement-bonded fiberboard from coconut meal corncob fibers and steel wire mesh. The mixture ratio of cement-bonded fiberboard included Portland cement type1: sand: coconut meal fiber: corncob fiber: water: calcium chloride equal to 1: 0.2: 0.0125: 0.0375: 0.3: 0.03 by weight and 5 different sizes of steel wire mesh were reinforced. Casted by compression and sharking machine. Tested the properties follow the TIS.878-2537. From the results 1 mm of diameter and 1” of gab of steel wire mesh (? 1 mm # 1”) was the proper size to reinforce the cement-bonded fiberboard to get highest bending strength. Moreover this cement-bonded fiberboard can pass the required standard. The high strength and thermal insulation cement-bonded fiberboard from coconut meal corncob fibers and steel wire mesh has the possibility to construction as exterior building wall.

The objectives of this research are to study the production to find the proper ratio to test the properties to suggest the implementation and to transfer the technology of high strength milk carton waste artificial wood mixed with poly ethylene terephthalate (PET) plastic waste. The ratios of this artificial wood included milk carton waste: PET plastic waste equal to 80:20 75:25 70:30 65:35 and 60:40 by weight. The milk carton and PET plastic wastes were grinded though sieve no.4. The artificial woods were casted by hot compression with 180 degree of Celsius for 5 minutes. The samples tested follow the TIS.966-2547 standard. From the results the 60:40 of ratio was the proper ratio which can pass the standard. The increasing of PET waste effected to decrease the density moisture and swelling of properties. In case of bending strength elastic modulus and tensile strength perpendicular to surface the increasing of PET effected to decrease their properties. The developed artificial wood mixed with milk cotton waste and PET plastic waste has the possibility to implement in decoration and construction both interior and exterior wall building. These results can register the petty patent and write the research paper which to transfer the technology.

The objectives of this research are to study the production to find the proper ratio to test the physical mechanical properties and thermal conductivity to suggest the implementation and to transfer the technology of l ight-weight precast concrete wall panel product with aerated foam injection technique as core wall. The light-weight precast concrete wall panel product was produced by casting the mortar panels with M3 ratio (proper ratio) set up the steels and injecting the aerated foams. From the testing results followed the TIS.2226-2548 and TIS.878-2537 the general characteristic of light-weight precast concrete wall panel product was perfect. The properties of light-weight precast concrete wall panel product include 17.81 MPa of compressive strength no bending when installed in common behavior 11.38% of water absorption passed in type1 of hardness and impact test 1110.58 kg/m3 of density 9.18 MPa of bending strength and 0.186 watt/m.K of thermal insulation. This light-weight precast concrete wall panel product can use as the thermal insulation wall in building. the developing product can apply to register the petty patent.

This research aims to study the using cassava pit wastes mixed with cement to particle board walls. The Portland cement type1: fine sand: tap water ratio is equal to 1: 0.5: 0.416 by weight. The ratios of cassava pit wastes to cement are used following: 0.05 0.06 0.07 0.08 0.09 and 0.10 by weight. The cassava pit wastes are crushed by plastic plastics granulators (pass sieve no.4). The casting of particle board walls use the compression machine in room temperature (30 – 35 degree of Celsius) and control 0.75 g/cm3 of density. The TIS 878-2537 standard (cement bonded particle board: high density) is followed to test the properties of particle board wall. Resulting the cassava pit wastes mixed with cement can cast to particle board walls and have good properties especially the thermal insulation property.

This research aims to study the properties of natural rubber STR 20 at 100 phr with various contents of coir (e.g. 0 5 10 20 40 and 80 phr) and then mixed with chemical substance at constant ratio. After that the samples are ground by two-roll mill and formed by compression molding at 150 degree Celsius. This leads into the coir reinforcement natural rubber plate of dimension 30x30x0.5 cm. The properties of the natural rubber plates are tested under ASTM standard. From the results it is found that increasing in coir then the properties of resilience and density are improved at every mix ratio. However the tensile strength tear strength and wearing are increased at some certain value of coir. The samples give no water absorption at every mix ratio. The results from this research indicate that it can develop into the rubber floor tiles and rubber wall tiles for furnishing the buildings in natural style.