The objective of this research was to study the influence of drying air velocity characteristics on paddy drying. The pneumatic dryer prototype was used in this study. Test drying 15 kg of Hom Pathum paddy at 22 – 25% initial wet basis moisture content was tested drying under the drying air temperature 80OC until its moisture is 14% wet basis with the two drying air velocity characteristics. The first characteristic of drying air velocity is constant at 12.80 m/s and another is reduced velocity every 15 minutes throughout the test process from 12.80 - 8.44 m/s. Drying in a vertical tube with a diameter of 3.81 cm and height 1 m for study the drying behavior drying rate (DR) specific energy consumption (SEC) and thermal efficiency of drying. The results showed that drying with constant air velocity gives a shorter time higher drying rate lower primary SEC consumption and higher thermal efficiency than drying with reducing air velocity.

This research’s objectives were to develop an energy saving rotary dryer for paddy using hot air recovery system and to evaluate the energy using. Rotary dryer divided rotating cylinder made of 304 stainless steel 2 mm of thickness 39 cm and 200 cm of diameter and length. The inverter was used to control speed of gear motor of 0.5 HP and rotating speeds of 1-3 rpm. The inside of cylinder composed screw and capture flights. The cyclone system was used to dust separating from the system. The moisture trap contained silica gel the outlet hot air was reduced moisture and recovered using. The fiber glass insulator was applied for reducing energy loss. The heating box composed 3 set of 1600 W heaters and blower motor power was 0.5 HP. In the experiment the drying temperature was varied of 50 60 70 and 80oC and cylinder speed was varied of 1 2 and 3rpm (15.66 10.66 and 5.66min of drying time). The initial moisture content of 10 kg paddy was 29.7?0.6 %wb. The result show that the optimum conditions drying temperature and cylinder speed were 70-80oC and 1 rpm (15.66 min) and final moisture content was 9.2-11.8 %wb. From the save energy testing found that the reducing of SEC was 0.4-0.6 MJ/kg water per drying cycle. There for this developed dryer can save energy using

These researches were to determine the preparing and drying on physical and chemical properties of germinated khaohang rice from KDML105. Two factors on study were preparing germinated khaohang rice (chill at 5 oC and frozen -20 oC) and drying method (tray drier and infrared drier). The results on expansion (%) and texture of cooked rice found that there were not significant influence interaction and two main factors. But main factor on infrared drying method were affected to the highest head rice yield (%) and lowest on Chroma (C*). As same as gamma amino butyric acid (GABA) had the highest 23.37 (mg/100g) and preparing germinated khaohang rice had between 20.50 to 22.21 (mg/100g). The pasting properties reducing sugar total phenolic scavenging activity of DPPH free radical (%) and resistance starch were significant influence interaction.

Devlopment of Screen Printign Devices Prototypes for Textile lndustry was a research project which it was established to solve the practical learning of the faculty of industrial textile and fashhion desing students at Rajamangala University of Technology Phra Nakhon. This set had 3 important machines such as a self assembly aluminum block screen an automatic aluminum screen could saved the saved the screen fabric1.76 m2 reduced the chemical usageand waste minimization in the process.The practical time reduced from 16 minutes to 1 minute using the automatic aluminum screen coating. The efficiency time was 97.81. The 400 gram emulsion consumed obtained the thin film layer on the screen fabricand evenness.The sharpen pattern displayed when the exposed time was 3minutes.Moreoverthe drying and fixation machine was completely for natural fiber and synthetic fibers at 80-180 C. Therefore the Screen Printing Devices Prototypes was effectively used in textile industrialdispose of the practical learning problemraw material savingand waste minimization adjacent to clean technology process.The prototype set was produced by house equipmentsand extended for textile industrial.