The research aimed to analyze and compare contents of accumulated residue of chlorpyrifos chromium lead and cadmium in five varieties of vegetables in Loei River Loei Province. Five varieties of vegetables such as Vegetable fern (Diplazium esculentum Limnocharis flava (L.)) Limnocharis flava (L.) Buch Lasia spinosa (L.) Thwaites swamp cabbge (Ipomoea aquatica Forsk) and water mimosa (Neptunia oleracea Lour.) were collected during winter summer and rainy seasons from Phu Luang Mueang Loei and Chiang Khan District. Chlorpyrifos was analyzed by high performance liquid chromatography (HPLC). The results showed that the highest chlorpyrifos contents were found in vegetables in winter and summer season in the amount of 0.04±0.00 mg/kg. Analysis of all three heavy metals were carried out dry ashing at 500C and acid digestion with nitric acid prior to analyzing by flame atomic absorption spectrophotometry (FAAS). The results showed that cadmium accumulation in the highest content among all metals in water mimosa (Neptunia oleracea Lour.) in summer season from Phu Luang District (1.83±0.01 mg/kg). The second highest metal content was lead which has found in swamp cabbge (Ipomoea aquatica Forsk) in summer from Mueang Loei District (1.40±0.08 mg/kg). chromium showed the lowest content in Limnocharis flava (L.) Buch in winter from Mueang Loei District (0.47±0.04 mg/kg). The contents of chlorpyrifos and heavy metals were not exceed the legal limits set by International Standard Food and Ministry of Republic Health No.98 of Thailand except Ipomoea aquatica Forsk which collected in summer that showed the lead content higher than the legal limits.

This Research is to Study the Development of 6k White Gold Alloys for Jewelry Production. By Studying the Influence of 6k White Gold Alloys on Physical Properties for Jewelry Molding Process. Of 6k Gold Alloys at Various Compound Rates. The Results of the Experiments Show that the Chemical Composition of 6k White Gold Alloys is Slightly Different when Compared with the XRF (X-ray Fluorescence Spectrometers). Compare the pre and Post-Melting Quantities. The Result of the Compounding Test with the Color Level of 6k White Gold at the Compound Rate 25%Au+54%Ag+0%Cu+3%Zn+18%Pd The Lowest Color Level was L * = 82.14 a * = -0.16 b * = 7.71 and the Lowest Color Difference was 21.07. With other Ingredients It Shows that the Test Specimen of 6k White Gold has a Rather Greenish Color and is Slightly Yellowish Compared to the Blue Line that Approaches the Standard line. These Properties are the Physical Properties Required to Produce a 6k White Gold Jewelry Body.

This Research is to Study the Development of 6k White Gold Alloys for Jewelry Production.The Optimum Conditions for Casting Jewelry and Jewelry were Investigated. The Results of the Experiments Show that the Chemical Composition of the 6k White Gold Alloys is Slightly Different when Compared with XRF (X-ray Fluorescence Spectrometers) Pre-and Post-Melting Quantities The Heat of the Test Specimen was found to be 5%Au+42%Ag+12%Cu+3%Zn+18%Pd 25%Au+46%Ag+8%Cu+3%Zn+ 18%Pd 25%Au+50%Ag+4% Cu+3% Zn+18% Pd and 25%Au+54%Ag+0%Cu+3%Zn+ 18%Pd It is Found that the Heat from the Beginning to the Level of Change before the Liquid is used the Average Temperature of 702.3 - 636.7 Degrees Celsius Respectively 25%Au+54%Ag+0%Cu+3%Zn+18%Pd It is the Formula that Gives the Lowest Value of Liquid State Change from 636.7 Degrees Celsius to the Best Value of this Experiment. Suitable for use in the Manufacture of Jewelry due to its Melting Ability for Molding. Melting for Molding and Formed by Hand. The Amount of Zinc(Zn) may be an Important Factor in the Variation which is Directly Proportional to the Maximum Increase in the Final order of 3.58 Percent.

This Research is to Study the Development of 6k White Gold Alloys for Jewelry Production. The Influence of Admixtures on Mechanical Properties was Investigated (Tensile Strength and Hardness) of 6k White Gold Alloys at Various Composite Ratios. The Results of the Experiments Show that the Chemical Composition of 6k White Gold Alloys is Slightly Different when Compared with the XRF (X-ray Fluorescence Spectrometers). Compare the pre and Post-Melting Quantities. Test results of Mechanical Properties of Test Pieces. The Tensile Strength of the 6k Gold Alloy is 25% Au+46%Ag+8%Cu+3%Zn+18%Pd The Highest Value was 1.14 kN / mm2 the Lowest Percentage was 64% and the Hardness was 259.87HV. The Result of this Test is that the Mechanical Properties of the Material are Brittle Material. When the Mold is Formed the Fracture and Forming will be Difficult. 25%Au+42%Ag+12%Cu+3%Zn+ 18%Pd 25%Au+50%Ag+4%Cu+3%Zn+18%Pd and 25%Au+54%Ag+0%Cu+3%Zn+ 18%Pd Tensile Strength in the Range of 0.66-0.70 kN / mm2 Percentage of Elongation in the Range of 84-90% and Hardness of 277.60 244.60 and 186.73HV Respectively. The Mechanics will Show that the Alloys of White Gold 6k 25%Au+54%Ag+0%Cu+3% Zn+18%Pd Have Similar Tensile Strength. The Maximum Percentage of Elongation is 90% and the Minimum Hardness is 186.73HV. It is Suitable for Forming because it has Ductile Material. This is a Good Mechanical Property in the Metal Forming Machine.

The project was clothing design for gentleman wear under concept of lohaprasada Structure that purposed for studied and designed of gentleman’s wear costumes by Concept design from lohaprasada structure. directed lohaprasada structure and isometric Design to decorated on gentleman to wear costumes. From the education found that tool of this project were a from the method that been Used for this study case is the descriptive analysis tool that analyzed about the architectural Parts of lohaprsada which is analyzed in 2 topics ; the silhouette and the appearance pattern. The main idea is to study the overall physical and bring the result of study to apply and create the meanswear collection. Conclusion of studies a researcher bring lohaprasada structure Design to invent and decorated from original lohaprasada structure by bringing isometric drawing techniques And embroidery technique to designs gentleman clothing which had amount 5 suits of oversize t-shirt with drop crotch pants over-long coat with sleeveless Jacket men jumpsuit oversized short coat with drop with drop crotch pants oversize hooded ruana with pleated pants. There were the style in identical way of all collection that created new style of gentlemans to wear costume design and tendency fashion helps to developed them.