This research aims to study how the level of excellence in the accounting profession and the usage of artificial intelligence technology affect the quality of financial reports of certified accounting practice. For the data collection the researcher used questionnaires. The population examined in this research consisted of 88 accountants working for high-quality accounting firms registered in Thailand. Descriptive statistics namely frequency percentage mean and standard deviation and inferential statistics including Pearson’s Correlation Coefficient and Multiple Regression Analysis were used to analyze the data. The study results reveal that accountants registered and working in high-quality accounting firms in Thailand reach a high degree of excellence overall. Furthermore artificial intelligence technology allows these accountants to positively affect the overall financial report quality at the highest level. The results of the research hypothesis test found that: 1) excellence in the accounting profession positively affects the quality of financial reports both overall and in every individual aspect and the result is statistically significant at the 0.01 level; 2) the use of artificial intelligence technology positively impacts the quality of financial reports both overall and in the individual aspect and the result is statistically significant at the 0.01 level.

This thesis presents improving power quality in power distribution system with integration of photovoltaic energy distributed generation having objectives to improve power quality in distribution system model of voltage sag and voltage swell in distribution system model of power loss in distribution system application of mathematical model model of power generation by using solar energy and distributed generation connection technique simulation. In this thesis the power flow was tested with Newton-Raphson algorithm joining with mathematical model. The case study was done by reduction of power loss in distribution system by using techniques of connection of distributed generation joining with model of distribution system 33 bus. The case study about improvement of voltage sag and voltage swell in distribution system used connection techniques of distributed generation joining with model of distribution system 69 bus. The study found that technique of connection of distributed generation that was presented could reduce power loss and showed the percentage of improvement of voltage sag and voltage swell in distribution system especially voltage sag case according to IEEE 1159-1995 standard. This thesis showed that severity level of voltage sag depended on the size and duration of each distribution system model situation by photovoltaic energy distributed generation can reduce voltage sag.

This research project aimed to test the mechanical properties and the capability in wear resistance of ultra-high molecular weight polyethylene composite as well as determine the optimal formulation of UHMWPE-based composites which had a main component of aluminum oxide. The developed formula was used in the manufacture of run-flat wheels and thus applied to build run-flat wheels with an understanding of the proper molding conditions under the run-flat wheel forming process. Two materials used in the research consisted of super-high molecular weight polyethylene (UHMWPE) as the base material and the additive of aluminum oxide (Al2O3). The parameters employed in the hot compression process to obtain the specimen for the experiment consisted of compressive force temperature time and the ratio between super-high molecular weight polyethylene and aluminum oxide. The test for mechanical properties consisted of an impact test a hardness test according to the ASTM D2240 standard a tensile test according to the ASTM D638 standard type I and a wear test according to the ASTM G77 standard. The results indicated that a hot compression condition under a pressure of 5 MPa a temperature of 210°C for 90 min and using 5% Al2O3 HTM 30 material caused mixed uneven powder particle sizes between 2 to 5 µm. The tensile test results inferred the yield strength of 20.52 MPa ultimate tensile strength at 29.96 MPa breaking strength at 22.83 MPa elongation at break at 265.8% and modulus of elasticity at 784.46 MPa. The highest hardness was 62 shore D the high impact strength was 586.8 J/m and it was displayed for the wear rate of hot compression specimens made of UHMWPE mixed with 5% HTM-30. Moreover it introduced a coefficient of friction the wear rate and the density of 0.12 8.66E-11 mm3/N.m and 1.2446958 g/cm3 respectively.

This research had two objectives that were to study parameters for forming bulletproof ceramic armor plates and to create a model of a bulletproof ceramic armor plate for small armored regular trucks. The parameters used to form a ceramic armor plate contain the thickness of the armor plate and the compressive strength which affects the density distribution of the green compact. A ballistic ceramic armor plate with a hexagonal shaped material was created as a concave bulletproof plate. Extrusion results displayed that the hexagonal material was formed at a very high density on the side surface of the armor plate but with uneven capacity distributed across the overall plate due to the friction occurring on the wall of the mold. The finite element method particularly at the Ansys/Explicit Dynamic tools were applied to analyse the damage of bulletproof plates. The model of a concave-shaped bulletproof plate was set for the SKD11material influencing the changes in the direction of the bullet firing when the bullet hit the bulletproof plate at a velocity of 880 m/s in accordance with the NIJ 4 standard. The bullet was made of tungsten carbide and the ceramic armor plate was built with a size of 300×300 mm and thicknesses of 14 16 18 and 20 mm. The bullet was fired into the center part and onto the curved surface of the ceramic plate. The result shows that the armor plate could not resistant to penetration. In this situation the direction of the bullets movement against the armor plate especially at a curved surface as a slope could result the deflection of the bullet direction as well as reduction of penetration capability.

The objectives of this research were 1) to study the behavior and decision to buy online food of vocational students in Phitsanulok Province 2) to compare of personal factors with behavior and decision to buy online food of vocational students in Phitsanulok Province and 3) to study online food shopping behavior affecting to buy online food decisions of students vocational in Phitsanulok Province. The research was a quantitative research using questionnaires from 400 vocational students in Phitsanulok Province. Data was systematically analyzed by percentage mean standard deviation (S.D.) t-Test One-way ANOVA and multiple regression analysis. The result showed that the behavior of buying online food was at moderate level. The decision to buy online food was at moderate level. Difference Personal factors including gender year of study type of subject housing type and monthly income had different of behavior of online food shopping with no statistical significance. Difference Personal factors including type of subject and monthly income had different of decision to buy food online with statistical significance at .05. Online food purchasing behavior effecting decision to buy food online with statistical significance at .05.