This research aims to study the Mirai Botnet working process which made high bandwidth impacted to Internet system. From 90000 clients of Deutsche Telekom cannot access to Internet that overall bandwidth growth nearly 1 TB per second in the history DDoS attacking behavior. As Mirai exaggerated attacking to ISPs and may be involved UniNet as a big umbrella which RMUTP network interconnected as well. The author would like to study in depth to several weak points of the end devices or IoT on Internet. In the Mirai code used the IoT devices such as the Internet cameras the CPUs based on ARM ARM7 Motorola 6800 SPC PowerPC X86 and SuperH (SH4). As the results of valuable attacking code studied based-on IPV4 attack without IPV6. The source code has more than 5500 lines with 16 files and 138 functions included 62 set of user accounts and passwords. Usage the 9 flooding techniques for port attacking via 22 23 and 80 with the IP scanning exceptions for DoD IANA GE and HP IP addresses. The Internet camera devices have to disable 22 23 and 80 ports or doing suitable usability techniques to manage for several flooding protection from system harmfully.

One of important equipment in reforestation or tree planting is a pot for mulching tree saplings. Originally pots were made of clay but they were too strong. When the trees grow up the pots must be smashed in order to let the roots and the stems grow up. Plastic pots are a popular alternative to be potted tree saplings due to their longer usability flexibility keeping and easy cleaning. In addition they are light and easy to move or transport. Typical pots usually have holes at the bottom which make poor ventilation that caused the slow tree saplings growth. Pots with holes in the side let the air comfortably flow and the roots do not go to the bottom of the pot. When the pots are moved the tree sapling roots are not ragged this help reducing the mortality rate of tree saplings. To Construct and find out the efficiency of plastic pot injection molded with 7.7 cm. in size 8 cm. high 0.10 cm. thick and the weight of 20 grams in the specification form the work-piece can be injected. For Construction and finding out the efficiency of holes for putting the plastic pot injection molded with 41 cm. wide 51 cm.long0.20 cm. thick and the weight of 330 grams in the specification form every work piece can be injected. There are 18holes for putting the plastic pot and all 18 holes are in the same size. Asst. Prof. Prasong KanKaew

Recently the Thai industry has continually grown up and also plays a role to economic growth in the country which affects the many of automotive components to be in the market. While the degeneration and waste of automotive components had increased as well. Therefore a car hood is one of the automotive parts which damage from the accident. Consequently the researchers have created a prototype material to develop into the car hood which made from the husk and water hyacinth. The random mixture of water hyacinth and husk was attempted to more than 3 ingredients. By forming a flat plate with thickness between 1 to 3 millimeters was used as prototype of the car hood material in this research. Thus the mechanical properties such as compressing and bending test were attempted to by the universal testing machine. The results showed that using resin as a binder material (Reinforced resin by water hyacinth and husk) will have the less ability of energy absorption. While using polymers as a binder (Polymer resin by water hyacinth and husk) will have the better ability of energy absorption. The properly mixture between water hyacinth and husk referred to the energy absorbing properties is 50:50 because the least linear stiffness is 1.087 N/mm. Besides the ability of energy absorption is 1612444 J/m3 which is property of this ingredient can reduce the severity of the impact in the event of pedestrians collision in the best.

The purpose of this study is for 1.) Study the proper quality of whey protein and sweetener in gummy jelly 2.) Study about nutrition value of reduced calorie gummy jelly fortified with whey protein 3.) Study consumer acceptance of reduced calorie gummy jelly fortified with whey protein by assessing from sensory and physical quality and chemical composition. The results showed that the proper quality of whey protein is 20 percent and the sweetener ratio (sugar:xylitol) is 0:100. The testers gave the scores for consumer acceptance on the appearance color smell taste texture(elasticity) and fondness of the products and the scores are 7.44 7.14 6.90 7.64 7.90 and 7.76 respectively. The chemical composition analysis in 100 grams gave the energy 261.60 kilocalories carbohydrate 88.57 grams protein 9.84 grams fat 0.09 grams and fiber 0.54 grams Consumer acceptance of reduced calorie gummy jelly fortified with whey protein from 120 people the results show that who knew gummy jelly and had it before is 93.4 percent who knew whey protein and had it before is 37.5 percent who thought the reduced calorie gummy jelly fortified with whey protein is interesting product is 35.9 percent who accepted the reduced calorie gummy jelly fortified with whey protein is 99.1 percent who would accept the reduced calorie gummy jelly fortified with whey protein if it gives lower energy than general gummy is 97.5% and who will buy the Reduced sugar gummy jelly fortified with whey protein is 97.5%

The purposes of the study “The Design of Lady Casual wear in Minimal Style from Resak died cotton cloth” were 1) to study design of Lady Casual wear in Minimal Style from Resak died cotton cloth. 2) to study consumer satisfaction with Lady Casual wear in Minimal Style from Resak died cotton cloth. Minimal Art Concept was used to guideline The Design of Lady Casual wear. The Design of Lady Casual wear was composed of 18 clothing sets 6 types. The five Fashion Design Specialist by Purposive Sampling chose one from six sets. The researcher sewed 6 clothing sets which were selected and after that the 6 sets were used to find out the satisfaction of female students at Home Economics Rajamangala University of Technology Phra Nakhon. A sample was selected from accidental sampling. Data was analyzed by Percentage Compensation and Standard Deviation. The results finding of the consumer satisfaction with Lady Casual wear in Minimal Style from Resak died cotton cloth showed that target groups are satisfied at a high level. The first is the shirt and skirt type (average 4.42).The second is the Overalls type (average 4.36). The third is the Blouses and shorts type (average 4.35). The fourth is the Blouses and trousers type (average 4.21). The fifth is the Coat type (average 4.10) and The Last is The Dress type (average 3.99).