A comparative study. The purpose was to study the costs and the cost of return. Comparative analysis of the difference between revenue and the cost of return breakeven Between brackish and salt water fish white snapper. This study used data from interviews with of 24 cases. The period 6% of Interest rate of study 5-year. - A study of the brackish cost per acre was 355127.00 baht Salt water 31556.34 baht cost was 850784.15 baht Salt water 788305.00 baht Income yield 1914250.00 baht. and Salt water 1908750.00 baht. the cost according to the net present value (NPV) were positive value equal 620881.68 baht Salt water 628974.65 baht and the internal rate of return (IRR) 16.95% Salt water 17.45 % with a payback period of 1 year 9 months 6 days Salt water 1year 8 months 4 days and the breakeven point is equal to 96529.25 baht Salt water 86643.80 Baht. - The salt water yield worthwhile than brackish water.

The purpose of this research work was to synthesize titanium dioxide supported on activated carbon and used it as a catalyst for dye decolorisation. The effect of preparing factors on titanium dioxide supported on activated carbon such as calcinations temperature and the amount of carbon supports were investigated at 300 400 and 500OC and in range of 5-30 percent by weight respectively. The X-ray diffraction (XRD) technique was used to detect the crystal structure of prepared catalysts. It was found that all peaks were anatase phase. The morphology of these catalysts was analyzed by scanning electron microscope (SEM) and transmission electron microscope (TEM) techniques. The results showed regularly distribution of titanium dioxide supported on activated carbon. The particle size of obtained catalysts was 5-10 nm. The Brunauer-Emmett-Teller (BET) technique was analyzed physical characteristic of catalysts. The specific surface area average pore diameter and pore volume of catalysts was 151.02-784.13 m2/g 26.94-64.35 and 0.24-0.55 cm3/g respectively. Furthermore the activity of obtained catalyst was carried out by using these catalysts to decolourise dye aqueous solution. The titanium dioxide supported on activated carbon 20 percent by weight can obtain 99.78% decolourisation at dye concentration 75 mg/L catalyst concentration 0.5 g/L within 90 minute. Comparison with titanium dioxide P25 (commercial grade) titanium dioxide supported on activated carbon has higher ability. This is because it was not only photocatalytic reaction but it was also absorption

This research was aimed to study the effect of binders on cracking behavior of high strength concrete under restrained shrinkage condition. The cracking behaviors of concrete that study were cracking age in uniaxially restrained shrinkage test shrinkage rate free shrinkage crack propagation and strength of concrete. The binders used in this study were fly ash and limestone powder. The weight percentage of replacement of cement by fly ash and limestone powder were 30 and 10% respectively. The water to binder ratios was 0.35. The results indicated that the influence parameters of shrinkage cracking were type of binder amount of free shrinkage shrinkage rate and tensile creep of concrete. The use of fly ash and limestone powder could reduce free shrinkage and shrinkage rate of concrete and result in the longer cracking age than cement-only concrete. The tensile creep of cement-only concrete was higher than that of limestone powder concrete and fly ash concrete respectively

Electronic load is an importance part of power supplies testing system. For non-electronic load type it is required to replace a resister with a new one leading to complicated working procedure. The modern power electronic technology is employ to solve this problem. The electronic load can vary the value following user command. Imported electronic load is costly leading Thailand to have a balance of trade deficit. This article proposes design and implement of an economical cost 30V 1 k DC-Electronic Load controlled by Microcontroller. The tested results can confirm the validity of this proposed electronic load

The objective of this study was investigate the optimal formulation of Homemade dairy yogurt that 100 percent of dairy milk ratio of dairy milk to skim milk powder and milk powder was 90:10 85:15 and 80:20 respectively as compared to the control (commercial-yogurt Dutch mill). The Yogurt mixeds were heated to 85 C and held for 5 min incubated at 43 C until the pH reached 4.3. The mixes were then stored at 4 C. Yogurt were prepared from higher ratio of dairy milk : skim milk powder and milk powder led to the more time of incubation. The 31 participated sensory evaluation of the sample. From the result choosed first three formulas to analysed in chemical characteristic and bacterial chariacteristic. Total solid of yogurt were prepare from 90:10 and 85:15 of dairy milk : milk powder ratio were not different with control (p>0.05). Total cell count was found to range between 8.08 – 8.50 LogCFU/g and Lactic acid bacteria was found to range between 6.71 – 8.88 LogCFU/g. The optimum formula of homemade dairy yogurt that ratio of dairy milk to milk powder was 90 : 10 and cost per unit (140 g.) was 10.51 Baht compare with control was 14 Baht.