The objective of this research is to develop the precast adobe wall panel with high corrosion resistance and good thermal insulation. The ratio of Portland cement type1 clay rice husk ash straw rice husk waterproofed liquid and tap water was mixed and casted as same as the common concrete and reinforced by bamboo. From the results the proper prototype ratio of precast adobe wall panel was Portland cement type1: clay: rice husk ash: straw: rice husk: waterproofed liquid: tap water which equal to 1: 3: 0.3: 0.02: 0.02: 0.02: 0.4 by weight. The properties of the precast adobe wall panel prototype included density 1797 kg/m3 water absorption 16.70% bending strength 2.61 MPa compressive strength 21.40 MPa thermal conductivity coefficient 0.314 watt/m.Kelvin. Moreover the precast adobe wall panel prototype also was verified by TIS.2226-2548 with properties of impact resistance deflection and hardness in medium duty (MD) level. These straw and rice husk effected the precast adobe wall panel to decrease the density bending strength thermal conductivity coefficient and increase the compressive strength and water absorption.

Based on the research on creation of bas-relief molds for production of bas-reliefs made from boiled pineapple leafs conducted by Rachadasak Pengcum of which purpose was to help generate income for members of Pineapple Leaf Paper Community Enterprise Ban Pasang Wiwat Mueang District Chiang Rai Province it was found that the bas-reliefs need further improvements in terms of appearance and durability as well as the use of other natural raw materials to produce them. The researcher therefore has considered developing the previous research by applying other 3 valueless natural materials which include rice straw water hyacinth and banana stem skin to make bas-reliefs for different beautiful surfaces of the products. Also the quality of bas-reliefs has been comparatively investigated by surveying satisfactions of members of the Community Enterprise and visitors to the project towards the bas-reliefs made from rice straw water hyacinth and banana stem skin. The total period of questionnaire distribution was 3 months. There are 59 respondents administering the questionnaires most of whom (43 persons) are female which accounts for 72.88 per cent. The majority of the respondents (25 persons) obtained junior/senior secondary school diplomas or equivalent accounting for 42.37 per cent. 16 respondents or 27.12 percent are 60 years of age. As for satisfactions towards the bas-reliefs made from rice straw 89 times of “strongly agree” was selected whereas 126 times of “pretty much agree” 75 times of “fairly agree” and 5 times of “disagree” were marked by the respondents. Concerning the bas-reliefs made from water hyacinth 87 times of “strongly agree” was selected while 97 times of “pretty much agree” 110 times of “fairly agree” and 1 time of “disagree” were chosen. When asked about the bas-reliefs made from banana stem skin the respondents selected 77 times of “strongly agree” 99 times of “pretty much agree” 110 times of “fairly agree” and 8 times of “disagree”.

On Earth all objects have a weight which Earths mass exerts on them to downward force of gravity. The weight of an object can find somethings weights in Newton unite. It calculated on multiply the mass in kilograms by the acceleration of gravity in the units of meters/seconds2. The purpose of this study was to design and develop an experimental setup for measuring the gravity acceleration. It involved designing by using free-fall motion method in vacuum tube based on digital Technology and photo gate sensor measured the velocity of the ball object. The data were analyzed by Microsoft Excel. The value of gravity acceleration obtained at 9.617 m/s2 from the experiment set up. The value from the experiment was compared with the obtained from true value at Bangkok Thailand. It found the error at 1.697 %. The assessment of the quality used a questionnaire for data collection. Five content experts in Physics teaching evaluated it. That found mean 4.89. The results of the study revealed that the experimental set up were excellent quality of and high efficiency. So that this experiment suitable to be used in physics classroom.

Nowadays Eye tracking technology is the next challenges of human computer interaction (HCI). This technology can help people all over the worldaccess computers through systems that use gaze control and especially important for people with physical disability. This research presents a system of assistive technology base on an eye-tracking interface while supported the communication system for independent living of persons with disabilities usability. The primary method of this system consists of a selection of pictogram buttons on three websites which used a low-cost eye-tracking device. The evaluation used the throughput of standards for computer pointing devices as a measurement of user performance to look at an on-screen target and dwell on it for 500ms for selection. The results showed that ten participants with a disability can be pointing and selection their overall mean throughput was 1.08 bits/s. Moreover the overall users of respondents were rather satisfied with the system. Consequently eye tracking technology is a great tool for interaction in the web application for a user with a disability.

This continued 2nd year researchaims to study the development of the para rubber press machine with wrought pattern for continued 2nd-year. Used natural para rubber mixed in a Ta-kuong by normally practical para rubber farmer style to evaluate the rubber press machine. A machine consists of the 11 roller sets in vertical pathway with press sticks on top. The components are as follows: a water press roller with a slope surface to reduce the diameter around 1-1.5 mm from a center the 3-pair sets of normal press rollers and the 2 duo sets of wrought pattern rubber press rollers with the induction motor at 1430 rpm. The rotating transmission based on belts and chains with a . The evaluated results produced the dried para rubber sheets thickness at 3.79 mm on average as the 2nd rubber sheet type standardin marketing need. From a top tray a farmer can put a sticky para rubber piece to a roller press machine easier than normal just 5.9 second on average with lower hand power to handler of the rubber pieces. In finally the wrought patternrubber sheets by a worker to carry the ta-kuong to a top tray of a rubber press machine and a rubber press man to put the para rubber pieces to a machine thus the completed 186 wrought rubber sheets per hour on average.