This research was aimed to study the participation behaviors in the electrical energy saving the factors affected to the participation behaviors and the promotion of the participation behaviors in electrical energy saving of the undergraduate students of the Faculty of Science and Technology Rajamangala University of Technology Phra NaKhon. The participants of 150 students from the Faculty of Science and Technology was also performed based on systematic sampling. The questionnaire was used. The statistical evaluation was also analyzed based on the percentage mean and standard deviation. A 85% of participants is male a range of age to be 19-20 years old (62.7%) second academic years by about 37.3% and a 65.3% of participants has been studying in the major of computer science. Knowledge levels in the electrical energy saving of the most participants are high (13.33%) moderate (62%) and low level (24.67%). The four participation behaviors in the electrical energy saving were analyzed including electrical lighting system air conditioner and ventilator system office electrical system and electrical equipment maintenances resulting in very high level with the average mean of 4.25 and standard deviation of .547. First the participation behavior in the electrical equipment maintenance was very high level with 4.31 and S.D.=.870. Second the participation behavior in the office electrical system was to be 4.27 with S.D.=.828. Third the participation behavior in the air conditioner and ventilator system was to be 4.21 with S.D.=.549. Finally the participation behavior in the electrical lighting system was very slow level with 4.21 and S.D.=.672. By comparing the participation behaviors in the electrical energy saving with the different of academic major of students the participation behaviors in the electrical energy saving did not significant different.

The objective of this research is to develop the high corrosion resistance and good thermal insulation precast adobe wall panels mixed with natural latex. The 6 ratios of Portland cement type1: clay: rice husk ash: straw: rice husk:waterproofed liquid: natural latex: tap water were designed including: 1: 3: 0.3:0.02: 0.02: 0.02: 0: 0.4 1: 3: 0.3: 0.02: 0.02: 0.02: 0.05: 0.4 1: 3: 0.3: 0.02: 0.02: 0.02:0.1: 0.4 1: 3: 0.3: 0.02: 0.02: 0.02: 0.15: 0.4 1: 3: 0.3: 0.02: 0.02: 0.02: 0.2: 0.4 and 1:3: 0.3: 0.02: 0.02: 0.02: 0.25: 0.4 by weight. The precast adobe wall panels castedas same as the common concrete and reinforced by the bamboo. From the resultsthe proper ratio of precast adobe wall panel mixed with natural latex was 1: 3: 0.3:0.02: 0.02: 0.02: 0.1: 0.4 ratio. The properties of the proper precast adobe wall panelincluded density 1810.83 kg/m3 water absorption 17.16 % compressive strength 15.13MPa bending strength 3.01 MPa thermal conductivity coefficient 0.234 watt/m.Kelvin. Moreover the proper precast adobe wall panel mixed with natural latex also was verified by TIS.2226-2548 with properties of impact resistance deflection and hardness in medium duty (MD) level. The proper amount of natural latex effected the precast adobe wall panels to improve the mechanical properties including: increase the compressive and tensile strength decrease the density thermal conductivity coefficient and water absorption.

The objective of this research is to develop the precast adobe wall panel with high corrosion resistance and good thermal insulation. The ratio of Portland cement type1 clay rice husk ash straw rice husk waterproofed liquid and tap water was mixed and casted as same as the common concrete and reinforced by bamboo. From the results the proper prototype ratio of precast adobe wall panel was Portland cement type1: clay: rice husk ash: straw: rice husk: waterproofed liquid: tap water which equal to 1: 3: 0.3: 0.02: 0.02: 0.02: 0.4 by weight. The properties of the precast adobe wall panel prototype included density 1797 kg/m3 water absorption 16.70% bending strength 2.61 MPa compressive strength 21.40 MPa thermal conductivity coefficient 0.314 watt/m.Kelvin. Moreover the precast adobe wall panel prototype also was verified by TIS.2226-2548 with properties of impact resistance deflection and hardness in medium duty (MD) level. These straw and rice husk effected the precast adobe wall panel to decrease the density bending strength thermal conductivity coefficient and increase the compressive strength and water absorption.

Energy is an important factor in the necessity of human life. Many countries around the world are seeking alternative energy sources. To use as alternative energy. Our alternative sources of energy are ethanol which can be produced from agricultural products. Including plants with cellulose components. The ethanol can be mixed with gasoline. It is a new product called gasohol. This research use of fresh water weed Hydrilla is a raw material in the production of ethanol. Hydrolysis sweetening and fermentation. The microorganisms used in fermentation processes the yeast is found Hydrilla through hydrolysis the acid is H2SO4 at 0.5 % . Measuring the concentration of the alcohol concentration of 4.0 % VOL 9 Brix %. The Hydrilla through hydrolysis at alkaline NaOH is at a concentration of 1 % concentration of alcohol concentration was 3.5% VOL 8 Brix %. Hydrilla and the Hydro Delight with distilled water (H2O) to measure the concentration of the alcohol concentration of 5.5 % VOL 12 Brix %. Thus it can be said that Hydrilla is a material that has the potential to produce ethanol for energy alternatives. And used as a source of renewable energy. Instead of using raw materials from food plants. And other energy crops.

The research aims to study and develop the Kaolinite mixed with cement powder for the mass wall. The Kaolinite development process to improve the characteristics. The Kaolinite mixed ratios are 10% 20% 30% and 40% and the result indicated that the experiment mortar-mix ratio at 0:8:2.75:0.2:0.05:0.04:0.5 of cement powder sand Kaolinite limestone superplasticised and clean water compared to No MK control sample covered ASTM standard in tensile strength more than 100 ksc compressive strength of MK20% with superplasticised at 434 ksc. The water absorption values under the standard passed