The research aims to study and develop the Kaolinite mixed with cement powder for the mass wall. The Kaolinite development process to improve the characteristics. The Kaolinite mixed ratios are 10% 20% 30% and 40% and the result indicated that the experiment mortar-mix ratio at 0:8:2.75:0.2:0.05:0.04:0.5 of cement powder sand Kaolinite limestone superplasticised and clean water compared to No MK control sample covered ASTM standard in tensile strength more than 100 ksc compressive strength of MK20% with superplasticised at 434 ksc. The water absorption values under the standard passed

This research aims to develop the concrete blocks mixed with cassava pit waste. There are 6 mixing ratios among Portland cement type1: rice hush ash: quarry dust: cassava pit waste: water reducer type A: tap water that include 0.7: 0.3: 10: 0: 0.02: 0.6 0.7: 0.3: 9.9: 0.1: 0.02: 0.6 0.7: 0.3: 9.7: 0.3: 0.02: 0.6 0.7: 0.3: 9.4: 0.6: 0.02: 0.6 0.7: 0.3: 9.1: 0.9: 0.02: 0.6 and 0.7: 0.3: 8.8: 1.2: 0.02: 0.6 by weight. The concrete block samples were casted same as the ordinary concrete blocks and test were conducted according to TIS.57-1990 standard. From the results the best proportion of concrete block mixed with coconut shell ash is 0.7: 0.3: 9.7: 0.3: 0.02: 0.6. The proper ratios of cassava pit waste can decrease the density or weight and increase the thermal insulation of concrete blocks. However the over amounts of cassava pit waste that effected to increase the water absorption and decrease the compressive strength properties of concrete blocks.

The objectives of this research are to study the product development of light weight concrete wall board mixed with coconut leaf waste for small community enterprise to find the suitable coconut leaf waste mixed ratio with cement river sand coconut leaf waste water and catalyst accelerator at 1:0.4:0.13:0.33:0.03 ratio. CC13 (1:0.13) at 28 days has density 2266 kg/m3 bending resistance 3.05 MPa heat conduction efficiency 0.236 W/m-K. The coconut leaf waste can absorb water inside and the cement board can attach to the concrete wall easily. Suitability to make the big concrete wall.

The purpose of this research was to investigate the optimum heat temperature for the EC500 wax cured basecoat extrusion from all castings without waxing in the mortar. To reduce waste when the casting mortar through the casting process Silver Sterling 925 silver jewelry company Muang District Chiang Mai where the waste is caused by waxing outflow. The imperfections and leave waxing inside. Experiment with high temperature heat in mortar. And analyze the quality of work surface after casting with microscope. To find defects such as droplets and porosities caused by a range of temperatures. Temperature of baking mortar There is a difference from the conventional waxing mortar temperature. That is outflow of EC500 type wax. In the mortar to live. High heat The results of the 100 sample EC500 wax samples were tested at a temperature of 25 ° C. The mortar temperature was 700 ° C. 60 percent of waste was found the mortar was laid at 750 ° C 54 percent of waste was found. The mortar temperature was 800 ° C 32 percent waste was found the mortar temperature was 850° C Detecting 1 percent waste. The results of the study show that heat temperatures of up to 850 ° C can solve the problem of casting sterling silver alloys from the EC500 wax model. Finds the least waste.

TThe objective of this independent study was to compare the opinions of The Government Pharmaceutical Organization employees’ towards the waste management within the organization. The participants were classified by personal characteristics of The Government Pharmaceutical Organization employees; and the research instrument used was a questionnaire. The research data applied the statistics included percentage frequency average standard deviation. The research hypotheses were tested by independent sample t-test. One Way ANOVA (F-test) was applied to verify two variables while Scheffe was used to test the research hypotheses among more than two groups of variables. The results of the study revealed as follows. 1. Most of the personnel were males aged between 31-40 years old holding Bachelor’s degrees in the area of production process with 5 to 10 years working experience. 2. Their opinions towards the waste management within the organization were found that the overall picture was rated in the high level in every aspect arranging from the average values of the highest to lowest namely Reuse Recycle and Reduce aspects respectively. 3. The results of the hypothesis testing revealed that the sample personnel of different genders have dissimilar opinions on the waste management within The Government Pharmaceutical Organization on the in the Reuse Recycle and Reduce ง aspects areas with statistical significance at the level of 0.05 and their different educational levels resulted in dissimilar ideas on the waste management within the organization regarding the Reduce aspect at statistical significant at the level of 0.05.