Dye effluent treatment with photocatalytic technique and adsorption process had an objective for studying the combination process between Titanium dioxide and activated carbon from dye effluent. The dye effluents were prepared from the direct dye reactive dye acid dye disperse dye and basic dye. The effluent dyes from the completely dyeing process at 1 % owf initially. All of dye structures were azo. From the study direct dye and reactive were successfully using combination process between photocatalytic technique and adsorption process whereas disperse dye favored in adsorption process. However acid dye and basic were ignored in this experiment cause of they were a bit of dye concentration in their effluent. The optimum condition for direct dye was 10g/l Titanium dioxide for 6 hours and 5 g/l activated carbon for 6 hours continuously. Reactive dye was performed in continuous condition as 10g/l Titanium dioxide for 6 hours and 10 g/l activated carbon for 6 hours. Disperse dye was the particular process in adsorption by activated carbon 15 g/l for 4 hours. It was summarized that the treatment of photocatalytic technique and adsorption process were upon on the type of dye.

Product development of End Mills AISI M42 tool steels products by cryogenics treatments after process by heating system through austenite structure had been conducted in order to increase effectiveness of wear resistance geometry designed in quenching figures quality of chip flow and improved by the cutting edge with sub-zero and heating system through producing the cutting tools on the rim of rake angle at 8° and 12° and 15° austenite temperature at 1210 ° C varied in room with temperatures at 35°C lower - 70 °C and -196°C respectively. The tempering at 535°C had been three time. End Mills figures then had been operated by 5 axis CNC grinding machine for the tools. The experiment had been conducted in accordance with the AISI 1045. Such as result revealed that stress relive of tools. it hardness between 67.7 up to 68.3 HRC and reduced I HRC. Having compared with the un-stress relief it revealed that on the 15° rake angle shear force increased 8° and 12° respectively. The result had denied the Shear theory however resisted against erosion better than 12° and 8°. The result revealed that cooling at - 196°C would help increase more 15% of cut effectiveness. Cooling treatment below 0° had tended to positively resist the erosion of the out tools. With its development of control of degrees of cooling substance acid the quality of products would be better increased. Such a result could be based of the development of product lines on highly-qualities cut tools which was domestically produced.

In recently years geopolymer or polysialate composites have been developed and applied for a variety of fields. They are known as inorganic matrices composites which are fabricated and cured at room temperature or thermoseted in a simple autoclave. Geopolymer composites provide an excellent opportunity for achieving the goal of producing low cost high temperature resistant composite. The aim of this study is an investigation and comparing the flexural properties of geopolymer composites after reinforcements were influenced by plasma treatment with original fibre fabric. And preliminary results of the improvement in tensile strength Young’s modulus elongation of E-glass fibre fabric due to plasma treatment are studied in this paper. Many reinforcements and geopolymer matrices are now available but our works are focused on geopolymer composite Q17 Q13K-1 combination with E-glass fibre fabric which was investigated fabrication procedures together with their specific properties of these materials have been evaluated compared and discussed.

The objective of this research is to study the suitable factor level for the improvement of annealing furnace for rolled coils steel sheet. The experimenting has been performed to find suitable oxygen level by 5 annealing furnace experiment. The research has been started by collection the combustion. After that the burning adjustment by changing combustion technology with 5 levels of BGCV control valve open as 23% 40% 50% 75% and 100% has been implemented. The combustion adjustment data are recorded analyzed and compared with incomplete combustion value. The research result has been found that after improvement the combustion value. The percentage of oxygen level are improved to the better quality which standard at MV0-49% equal 2.5-4 O2% and MV50-100% equal 1.5-2.5 O2% conclusion 1 furnace as follows at the MV23.1% MV40% MV50% MV75% and MV100% level of oxygen as 2.5% 3% 3% 2% 1.5% and level of carbon monoxide as 0 ppm 2 ppm 2 ppm 2 ppm and 0 ppm respectively. Resulting of fuel energy consumption in the annealing process has been reduced around 225608 baht /year/furnace. Therefore it can depict that energy saving and annealing furnace efficiency improving are increased. The modified parameters will be applied to be the new standard reference values for the further engineer’s operational manual.

This research studied the efficiencies of ceramic membrane filtration from industrial asphalt for dyeing wastewater treatment by forming a ceramic membrane in a diameter of 6 cm height of 2 cm. An appropriate proportion of industrial ashes: kaolin: sodium hydroxide solution mixed with sodium silicate solution was 46:18:36 at 800 ° C. For the properties analysis of ceramic membrane made from industrial ashes found that a shrinkage value compression resistance and density water absorption value and permeate flux were found 3 percents 0.6 Kilonewtons per cubic centimeter and 1.93 grams per cubic centimeter 45 percents 8.61 milliliters per square centimeter per minute respectively. Structural surface by a scanning electron microscopy was found that the porous inside of material was closely aligned together. Moreover precipitation of synthetic wastewater by using industrial ashes could help to increase the efficiencies of dyeing wastewater treatment. From the experiment it was found that the precipitation of synthetic wastewater with industrial ash was 94 percent filtration efficiency. On the other hand the efficiencies of synthetic wastewater treatment without precipitating of industrial ashes found only 69 percent. Moreover this research offers a new option for industrial wastes utilization.