This research is to test the fatigue endurance of the material by using end bending of specimen. The testing material is S45C steel and forming to the standard size for testing. The specimens with a diameter of 8 mm required a different bending moment. It was found that the large bending moment affects the fatigue of the specimen. The specimen quickly damaged due to the high bending stress and there were a small number of load cycles. If the bending moment acting on the specimen was reduced to the bending stress decreased and the number of load cycles increasing. It was shown that the bending stress and the magnitude of the bending moment affected the fatigue of the material. Also the appearance of damage marks of the specimen will have a flaw around the fracture surface. Then the flaw will be enlarged until the specimen will be damaged by fracture.

The application of integrated energy use in the agriculture sector It is presented in the form of using renewable energy from solar energy to produce electricity to use in conjunction with other sources of electricity such as generators or electric power systems. Using solar panels or solar cells the size and number of panels does not exceed 300 watts 4 panels and the electrical system of the electrical system. Supply electric power to the water pump size does not exceed the rating of 1500 watts 220 volts. Solar power supply systems alone may be affected by weather conditions or electrical power supplies. Including the quality of electricity obtained from solar energy and will result in the water pump not working efficiently. Therefore the application of solar energy by using a power supply system from 2 sources by using a hybrid inverter device to select the power supply from the solar cell is the main power and the power supply from the memory system is the backup power. Therefore a research project on the application of solar water pumps in a mixed system for agriculture is proposed to increase the efficiency of electric power distribution. This application of solar water pump hybrid system for agriculture when used with water pumps can normally help to save electricity and can also use solar energy instead of using electricity to pump water. Let the water pump and can work efficiently.

This research aims to study and compare the test results obtained from the rolling resistance tester of automobile tires based on force method and torque method system. The four newly manufactured tires were sampled from two tire classes namely passenger car tires (Class C1) and light truck tires (Class C2). The tire rolling resistance test according to the international standard UN ECE Regulation No.117 was used as an important research process. The experimental work discovers that the rolling resistance of the same tire obtained from the test between the two different methods of testing machines was not more than 6 percent different. The testing results that used the torque method system calculation are high reliability because of the principle of calculation from the measurement value directly results in. and suitable for research testing. However the force method tester can perform more than a tire simultaneous test which is suitable for working in industrial applications where time is limited.

The objectives of this research is to study the relationship between tolerance and measurement range of load cells. Tolerance test kit length of mass beam 90 cm was used. It can create the compressed force at the load cell more than 1 kN. The experiment cam be divided into 2 stages; 1.) verification of load range and 2.) linearity test. Both stages are tested at a temperature at 25°C using 10 to 30 kg of mass in the lowest compressed force condition of 0.091 kN and the maximum compressed force condition of 1.12kN As a result the linearity performance of the tolerance of the load cell test kit between calculated force and displayed value force are different 0.354 percentage only while the standard deviation of displayed value force and voltage signal output are 0.0013 and 0.0022 respectively. It reveals that the experimental result is reliable because of less than 1. In addition the tolerance of the load cell tolerance testing machine is 0.00300 (0.3 percent) which was calculated from the comparison of the tolerance specification of two main equipment that specified by manufacturer.

This research aims to develop the guidelines of an automated educational recommending system through various social media in form of chat robots (Chatbot). This is under the assumption that the Chatbot can assist the human workload in responding to Students’ frequently asked questions (FAQ). With the Chatbot inquirer students would be responded in fast and accurate to the inquiries. The prototype of this system is built on the Dialogflow platform to connect to the Line Application. The prototype was tested via users and received “good” level of the overall user’s satisfaction.