The objective of this research is to construct a phased array device to be able to inspect all sizes of welded pipes and to study materials suitable for creating a phased array. The results obtained from testing both materials are PLA plastics carbon fiber. In order to obtain the force exerted on the material and the intensity of the force exerted on the same material it is found that the strength of the comparison between the two materials is different from the PLA plastic test. Of carbon fibers will be strong and lighter than plastic. Result from the test for Elastic In the impact and strength tests of both materials it can be used to examine pipes with a circumference of 50 centimeters to 100 centimeters and to use a 34 mm. length phased array probe with a width of 24.6 mm. 36 degrees angle and then adjust the strap as needed to reduce the steps during the use of inspection equipment.

This project aimed to design and production of music video: 7 wonders song of the bands YOUNG BONG and to assess the satisfaction of the general public who use YouTube using a tool online surveys to gauge the satisfaction of the general public from 200 people. The statistic to analyze employed frequency percentage mean and standard deviation. The study found that the satisfaction toward 7 wonders song was at highest level ( = 4.47 S.D.= 0.63 ).

The purpose of this research was to design and carved soap products for gift and souvenirs and to study the opinions on the product design from carved soap products as gift souvenirs. The tool was questionnaire as the collect data from 7 experts and 100 samples. The data were analyzed by frequency percentage and mean in the form of tables and description as follow: 1. Most experts commented that should develop the product design from carved soap to difference from another one in the market. In addition the problem of creating product design from carved soap should be explain how to use chemicals to help maintaining. Then developmental guidelines should provide a number of useful uses and show polyester resurfacing on carved soap it is suitable because of keeping them were not broken. Moreover the polyester resin coating is too thick it was effect pattern craving more clearly Finally they chose the second sketching ideas because the product can hang on the wall and put in the table. It is quite look natural. 2. The samples opinions on the products of carved soap as a gift found that the design at the high level the average was at 4 . 1 5 . The overall aesthetic was at the highest level at 4.23 in terms of value and utility. The overall score was at 4.23.

This research Designing and Textile Materials Decorating for Apparels with Film Innovation. The objective is to study the use of film innovation and finishing materials for textiles. To design and decorate costume products with innovative films. This is a great way to showcase your knowledge and technology design and decorate your textiles for innovative costumes. The research instruments were 3 product designs and a satisfaction questionnaire for trainees. The samples used in the research were 12 randomly selected randomized individuals at the Faculty of Home Economics. Rajamangala University of Technology Phra Nakhon By analyzing data To find the average and average values. Summarize results in tabular form. And writing The tools used to collect data were: 1) three types of costume design namely jacket and skirt 2) three types of costume designs 3) On August 13 2018 at the Faculty of Home Economics Rajamangala University of Technology Phra Nakhon. 1) Film innovation The material is made of polymer. Chemical composition Polyvinyl alcohol It is a thermoplastic with special properties. Biodegradable And fire like paper. It can also be dissolved in water. The embroidery machine is easy to emboss but does not make the fabric thick or hard. Embroidery Machine And its easier to pull off than paper. When embroidered. When to use the costume can be washed normally. Because the film will react with the decomposition of the film with water. By soaking the warm water. Allow the film to dissolve for 15 minutes. 2) Design and decorate the costume products with innovative film. Then 3 innovative products were developed namely shirt jacket skirt. 3) Technology Transfer A workshop was held on August 13 2018 at the Faculty of Home Economics. Rajamangala University of Technology Phra Nakhon Most participants were satisfied at the highest level in all questions.

This research on the “The design and development of Quick-Dry finishing applied to Muslimah clothes” had the objective to create knowledge in the development of Muslim women’s clothing with the emphasis on religious benefits. Likewise this research aimed to solve the problems of dampness after ablution which is the daily routine of Muslim people in order to provide clothing that are suitable for wearing while retaining the aesthetic elements according to the doctrine of Islamic religion. The prototype of Muslim women’s clothing with a quick dry finish had been prepared for religious benefits. Moreover the guideline for the production of a new form of clothing had been developed to enter the AEC market in order to correspond to the government’s policy on economic development. The research process consisted of 9 steps as follows: 1) review related theories and literature; 2) conduct questionnaire to collect preliminary data and draw conclusions; 3) design 15 Muslim women’s dresses to reduce the dampness after ablution; 4) select 4 dresses to be used as prototypes; 5) conduct experiments on the sample group while they were performing ablution; 6) collect data from the satisfaction survey; 7) evaluate the obtained data; 8) analyze the obtained data; and 9) conclude and discuss the research findings. After selecting the prototypes that are appropriate to this research it is evident that all selected prototypes were black in color with a similar design to Abaya dress due to its classic look. The majority of the sample stated that they adhered to the culture of the Middle East which is the origin of Islamic religion. All of the prototypes used Ponte de Roma knit but were composed of four different types of fabric: C40 TK45 Micro27/72 and CVC40. The prototypes were tested according to Fabric Test standards. All types of fabric were compared in terms of their finishing properties: no finishing and quick dry finish. The results indicated that the color resistance to washing had decreased for C40 TK45 and Micro75/72 fabrics while improved for CVC40 fabric. Meanwhile the color resistance to sunlight had decreased for C40 fabric while improved for TK45 and Micro75/72 fabrics and remained unchanged for CVC40 fabric. Moreover the color resistance to sweat and water had decreased for C40 TK45 and Micro75/72 fabrics while improved for CVC40 fabric. In addition fabrics with the composition of synthetic fibers had a better moisture management than fabrics with the composition of natural fibers. Meanwhile the drying rates of C40 TK45 and Micro75/72 fabrics increased by 26-28% when compared to fabrics of the same types but without a quick dry finish as opposed to CVC40 fabric that reduced by 11%. The most prototype popular was number 4 which was suitable for all factors.