Molds manufacturing to produce chloroprene rubber product with carbon steel over time the mold surface will wear. From the original. The practice in the industry often uses surface coatings (Hard chrome method) or change materials to create molds. Therefore this research is to study the effect of corrosion or wear. To see the size of surface mold changed in the experiment. Based on a tolerance of 0.1 millimeters at the molding point and after molding in the actual work conditions of a 2-3 weeks sample and mold size measurement. At less than 10 times the permissible coordinate value is 0.01 millimeters. The experiment found that. The wear of carbon steel molds was formed with chloroprene rubber. It has a very small value when referenced to the tolerance coordinates which is not significantly reduced when the rubber specimen size is determined. The allowance range is 10 μm to 100 μm. Therefore the design of chloroprene rubber to make molds with carbon steel. It can help reduce production costs. Without replacing with corrosion-resistant materials or adding coatings.

Nowadays one of the automotive engineering is conductivity of brake pads playing a role in friction coefficient which means safety of customer. Thus thermal properties have been improved using composited materials. This project aims to study the heat capacity behavior of 3 different brake pads which are supported by the company Compact International (1994) Ltd. For experimental works temperature based on brake condition was simulated from 05 to 003°C at 5 MPa of pressure. By standard JIS D4413 testing condition of pressure was referred. The heat capacity values of brake pads are calculated under the temperature conditions. As a result of testing brake pad made of copper or high metal powders result in relatively low heat capacity. On the other hand brake pads containing fiber and a large amount of fillers result in an increased heat capacity and stability in various temperature conditions. The heat capacity varied according to the operating temperature. In addition the lubricant contained in the brake pads affects the higher heat capacity and stability at various temperatures.

This research is a study of the optimum heat temperature for baking sintered castings for burnout removal of EC 500 type ash wax from cast mortar. Improving jewelry casting process to reduce waste from silver jewelry production process. By studying the temperature of the mortar. To burn remove wax from the mortar and clean the gaps. Then try to bring silver water instead of metal casting. The results of a baked casing study using the EC500 housing prototype from the study showed that the EC500 wax material is melted from all solids to ash wax by heating at 850 ° C to burn. Remove ash wax which makes the cavity clean. When the casting was casted with 925 sterling silver the most complete workpiece after the improvement of the waste jewelry casting process was found to be 1 piece 1 percent 99 pieces or 99 percent.

The purpose of this research is to study assessment of safety in construction of building projects. The safety assessment form was developed by referring to the Ministerial Regulations. The safety assessment composed of 8 categories: (1) construction site perimeter (2) electricity and fire protection (3) crane (4) passenger lift and material hoist (5) welding (6) fall protection (7) temporary scaffolding and stairs and (8) personal protective equipment. Based on the safety assessment of the construction site the size of the large building exceeds 2000 m2 and height exceeds 23.00 m. in the Bangkok metropolitan has of 20 buildings. The average of safety is 80 percent. By construction site perimeter the highest average and the fall protection has the lowest mean. So all parties involved workers contractors and project owner in particular need to focus on safety work to prevention against falls from high in order to reduce the loss of property life company reputation including the morale of the work as well.

The research is study motives the affect participation in quality assurance personal of Faculty of Engineering Rajamangala University of Technology Phra Nakhon from example group of 182 people which classified by sex ages position educational degree field of work and working life. This research is used themethod is collecting data by question tool themethod is questionare tool fo collected data that could be two categorized include knowledge skills and attitudes. The questionnaire is five rating scales that analyze the result by frequency percent average the average of standard deviation and T-test independent by using one way ANOVA. The results were as follows : From one hundred percent of the personnel of Faculty of Engineering Rajamangala University of Technology Phra Nakhon whom 63.70 persent classified by the educational field and 36.30% support line are ready to enter into Asean community which could be seen average in whole picture. After considering in three aspects the result appeared that knowledge and skills of personnel are also average. However the attitude of personnel was considered in a high level. Hypothetic test result was found that there was no difference among the personnel with difference sex ages educational degree field of work and working life in their readiness in entering Asean Community. position