. This research aimed to study the acidification processes of carving vegetable using acid conditioning machine under emperature and pressure control which was developed in this study. Four acidification procedures were done at normal atmospheric pressure (method 1) under vacuum pressure for 10 (method 2) and 20 min (method 3) and vacuum pressure alternating with normal atmospheric pressure for each of 1 hour. There were two main parts of acid conditioning machine including the temperature controller inside the pickle tank and heat conductor tank and the pressure controller inside the pickle tank. The pickling temperature was stabled at 40oC under the pressure of 0.5 Bar. PLC (Programmable Logic Controller) program was used to write the ladder for controlling all processes and display through SCADA system. The results showed that the acidification method by soaking the carved-rose carrot under vacuum pressure alternating with normal atmospheric pressure showed the shortest time to equilibrium by 7 hours. Then the carved-rose carrot was packed in the glass jar followed by sterilized in boiling water for 15 minutes and stored at room temperature for 7 days. Total bacteria count Escherichia coli and Yeast-mold were not exceeded than the standard limit. Staphylococcus aureus was not detected throughout the storage periods

The objective of this research was to find the suitable processes of carved-vegetables which packed in hermetically sealed container. Two vegetables were composed of carrot and pumpkin. There were carved into rose or leaf shape. An optimum ratio of 2 recipes of pickle solution were studied. The first one was a recipe which acidified with lactic acid (acidified-recipe) to pH <4.6. Another one was a recipe supplemented with preservative (preservative-added recipe). The results showed that an optimum ratio for acidified-recipe was composed of 7.23% vinegar 64.81% water 0.81% salt 27.00% sugar and 0.15% lactic acid which showed the final pH was 3.27. For preservative-added recipe an optimum ratio was composed of 27.03% vinegar 27.03% water 0.9% salt 45.05% sugar and 200 ppm sodium metabisulfite which showed the final pH was 3.39. Carrot pumpkin green papaya and cucumber were sanitized in peroxyacetic acid (80 mg/L 3 min). Radish was dipped in tap water for 3 min. Then all carved-vegetables were immersed in calcium chloride solution (0.5% 2 min) before preserved in acidified-recipe solution in plastic box with a lid and then stored at room temperature for 4 days. Equilibrium time pH and °Brix were studied. The results showed that pH and °Brix were decrease during 4 days storage and showed obviously tended to equilibrium. However carved-radish and cucumber were spoiled by microorganisms as a film on the surface of pickle solution and gas bubble was occurred inside a container on 4 days of the storage. Hence three carved-vegetables including carrot pumpkin and radish were used in the next experiment which preserved in preservative-added recipe. Treatment was compared with the same recipe without preservative as the control. All types of carved-vegetables had an equilibrium time for 7 days. Three parts of samples e.g. pickle solution carved-vegetables and mixed-sample showed pH lower than 4.6 and °Brix were gradually decreased during the storage. Shelf-life of all carved-vegetables stored in hermetically sealed container was up to 7 days. Total bacteria count E. coli yeast-mold were not exceeded than the standard limited by Ministry of Public Health and Staphylococcus aureus was not detected throughout 7 days of the storage.

Nowadays Thailand is realizing the economic value of earthworms. Earthworm farming is a driving force that can stimulate the Thai economy. The objective of this project is to measure the humidity and temperature properties of the worms the two boards are circuit boards in microcontroller. These are the WeMos D1 ESP8266 board and NodeMCU ESP-32S board. The WeMos D1 ESP8266 board to measure the amount of water and temperature of of the soil and can turn the water supply on or off automatically. The NodeMCU ESP-32S board has a database system to collect real-time humidity and temperature data. The data is processed and displayed via a web interface. The experiment showed that in regard to earthworm farming the soil moisture alert system in the earthworm closet has a temperature accuracy of 28.5°C. The top soil has a humidity accuracy of 65% the middle soil has a humidity accuracy of 67% and the lower soil has a humidity accuracy of 67%. This allows the ideal moisture and humidity levels for the propagation of earthworms to be maintained. The alert system displays the temperature and humidity in the earthworm closet and can turn the water supply off if the soil moisture level gets too high for the worms - this can all be monitored via the web application. .