The purpose of the research is to devise and implement for testing the ability to absorb energy from vibration. The results are obtained from simulating the operating status of small machines. In order to get the mechanical force from the vibrating of the machine by using piezoelectric materials (PZT) It was found that the size of the piezoelectric materials used in each condition affected the energy absorption. There are variables interested in different diameters at 27 and 35 millimeters. The result shows that the dielectric displacement is directly proportional to the force used but is inversely proportional to the size of the cross-sectional area of the piezoelectric material. In addition the ability to absorb energy in one second is 4.51 volts and has a maximum energy of 7.4 x10 -8joules.

Nowadays an automotive industry steadily has been growing and playing a major role on economy development for many years. The crash box is one of the most important parts for safety but it was found that the crash boxes manufactured domestically are not met international standard requirements. This is due to process and material limitation. This process for automotive safety test requires high budget and there is unclear approach for specific test. Therefore a study of crash boxes referred to energy absorption project was conducted as an alternative choice of testing. Regarding to the problems as addressed above this project was aimed to design and test crash boxes which come in various structures; simple type corrugated type and honeycomb type of crash box. In addition it was also emphasized in studying energy absorption behavior and physical deformation of crash boxes after dynamic and static energy being applied. Numeric simulation and static test methodology of front collision were applied for these tests in reference to USA NCAP standard for automobile collision test. Testing all types of crash boxes indicated that the corrugated type was able to absorb energy at 2.8% and 5.9% higher than honeycomb type and rectangular type respectively. This is capable to pickup stress and strain continually and effecting to more energy absorb than another type. Additionally this corrugated structure is feasible and suitable for crash box design in automotive manufacturing.

Nowadays an automotive industry steadily has been growing and playing a major role on economy development for many years. The crash box is one of the most important parts for safety but it was found that the crash boxes manufactured domestically are not met international standard requirements. This is due to process and material limitation. This process for automotive safety test requires high budget and there is unclear approach for specific test. Therefore a study of crash boxes referred to energy absorption project was conducted as the alternative materials for product. Consequently this project was aimed to design and test crash boxes which made from the diversity of the alternative materials such as aluminum aluminum reinforced by foam resin reinforced by fiberglass resin reinforced by water hyacinth and resin reinforced by water hyacinth and husk. In addition it was also emphasized in studying energy absorption behavior and physical deformation of crash boxes after dynamic and static energy being applied. The experimental works were applied for these tests in partly referenced to US NCAP and ECE R29 standard for automobile collision test. Testing all types of crash boxes indicated that the aluminum reinforced by foam type was able to absorb energy at 189 MJ/m3. It is higher than resin reinforced by water hyacinth and husk at 1 MJ/m3 as 188 times. Furthermore the comparison of the energy absorption (per unit volume) between the aluminum reinforced by foam type and the steel type from the previous project equivalent 20 MJ/m3 found that it is 8.45 times of difference. While the front impact test was not successful because the size of crash boxes was not suitable for the energy volume. It was a cause for non-available calculation of energy absorption value.

Nowadays an automotive industry steadily has been growing and playing a major role on economy development for many years. The crash box is one of the most important parts for safety but it was found that the crash boxes manufactured domestically are not met international standard requirements. This is due to process and material limitation. This process for automotive safety test requires high budget and there is unclear approach for specific test. Therefore a study of crash boxes referred to energy absorption project was conducted as the alternative materials for product. Consequently this project was aimed to design and test crash boxes which made from the diversity of the alternative materials such as aluminum aluminum reinforced by foam resin reinforced by fiberglass resin reinforced by water hyacinth and resin reinforced by water hyacinth and husk. In addition it was also emphasized in studying energy absorption behavior and physical deformation of crash boxes after dynamic and static energy being applied. The experimental works were applied for these tests in partly referenced to US NCAP and ECE R29 standard for automobile collision test. Testing all types of crash boxes indicated that the aluminum reinforced by foam type was able to absorb energy at 189 MJ/m3. It is higher than resin reinforced by water hyacinth and husk at 1 MJ/m3 as 188 times. Furthermore the comparison of the energy absorption (per unit volume) between the aluminum reinforced by foam type and the steel type from the previous project equivalent 20 MJ/m3 found that it is 8.45 times of difference. While the front impact test was not successful because the size of crash boxes was not suitable for the energy volume. It was a cause for non-available calculation of energy absorption value.

Nowadays an automotive industry steadily has been growing and playing a major role on economy development for many years. The crash box is one of the most important parts for safety but it was found that the crash boxes manufactured domestically are not met international standard requirements. This is due to process and material limitation. This process for automotive safety test requires high budget and there is unclear approach for specific test. Therefore a study of crash boxes referred to energy absorption project was conducted as an alternative choice of testing. Regarding to the problems as addressed above this project was aimed to design and test crash boxes which come in various structures; simple type corrugated type and honeycomb type of crash box. In addition it was also emphasized in studying energy absorption behavior and physical deformation of crash boxes after dynamic and static energy being applied. Numeric simulation and static test methodology of front collision were applied for these tests in reference to USA NCAP standard for automobile collision test. Testing all types of crash boxes indicated that the corrugated type was able to absorb energy at 2.8% and 5.9% higher than honeycomb type and rectangular type respectively. This is capable to pick up stress and strain continually and effecting to more energy absorb than another type. Additionally this corrugated structure is feasible and suitable for crash box design in automotive manufacturing.