The purpose of this research is to study on variables affecting fuel injection performance of biodiesel fuel injection and pyrolysis fuel. To test for variables affecting the fuel injection performance of biodiesel fuel injectors and pyrolysis fuel. By experimenting and modeling using computer programs to compare results. Finally for to use the information in the design of the car nozzle to work well with Biodiesel and pyrolysis fuel. The tested fuels which are pyrolysis fuel Bio-diesel fuel and diesel fuel are tested by tester Anton Paar@ Stabinger Viscosmeter (model SVM 3000/G2) ASTM D341 standard. The result shown that the density of the fuel is increasing normally. However the viscosity of the diesel and biodiesel are strong increased whereas the reducing of temperature is unaffected to the pyrolysis fuel. The fuel injection performance test showed that the density and viscosity of fuel were the major variables that affected the injection performance of the fuel. In case of using pyrolysis oil Injection performance is trend to higher other fuels and cold conditions.

The sensitivity analysis in efficiency of solar water heater system self-circulated by a stream power was performed in this study. The mathematical model of the system was developed based on the experimental results to predict the available amount of water pumped temperature and pressure in main devices. This system was operated by using a simple flat plate solar collector with an exposed area of 1.58 m2 and a storage tank of 30 liters. The results of systematic performance which performed by math model was compared to the experimental results. It was found that the values of were 5.876% 3.583% and 1.361% for vapor pressure and temperature in the flat plate solar collector and temperature in the storage tank respectively. The system was workable when the solar energy input values were equal to or greater than 584 W/m2 607 W/m2 632 W/m2 and 662 W/m2 for discharge head 1 m 1.5 m 2 m and 2.5 m respectively. From system simulation the system could have the daily average thermal efficiency was between 2.94 – 11.47% and the daily average pump efficiency 0.00057 – 0.0026% depending on the intensity of incident solar radiation and the discharge head of the system.