The Experiment Set of Pipe’s Loss Flow is intended to design and create a trial version of the loss of flow in the pipe and the objective is to find the speed of the flow through the pipe by reading the difference of pressure The Experiment Set of Pipe’s Loss Flow is equipped with the structure of a width of 86 centimeters long 120 cm high 171 centimeters and have a trial version which contains the water pump the Centrifugal pump size 0.5 HP 220 – 240 volt 1 set. The tanks for trial 28 liters

The purpose of this project is to study the mechanical and physical properties of recycled roofing materials. The pulp extracted from the UHT beverage boxes to get aluminum foil mixed with low density polyethylene. This can be used engineering and is an option to reduce the amount of UHT boxes left over to roofing sheets. In experiment 3 aluminum foil medium size and fine then hot and extruded with 68 and 10 bar compression then cut into test pieces. To test mechanical and physical properties in accordance with the test standards: Torsion Testing Tensile strength Impact resistance Heat resistance water absorption and density testing. Compare the mechanical and physical properties of the material; different sizes of aluminum foil and compressive strength. To bring the best materials to the product. From the tests it was found that the properties of recycled composite materials From the box UHT beetroot This is made of coarse aluminum foil. 18.23 MPa bending strength 10.66 MPa tensile strength 110.987 J / m2 impact resistance 52.40 Shore-D Hardness 0.62 % Water Absorption 0.70 % Thickness Swelling 1.086 g/m3 Density 0.031 m2.K/W Thermal Resistance and 0.291 W/mK Thermal Conductivity is the best mechanical properties. Due to the large aluminum foil it can be used for high strength. Which is higher than the aluminum foil of a smaller size.