This research was resulted of the characterization of cement paste composites (CPC) blended with palmyra fiber ash and surface-treated on short SWNT prepared by an electroless plating process. The cement paste composites included cement 270 meshes of palmyra fiber ash and short SWNT. The design of experiment was divided into 3 conditions namely uncuring 28 and 56 days in distilled water. The properties of CPC were carried out in chemical composition physical mechanical mineral phase microstructure and statistical analysis. It was found that in the chemical compositions an amount of silicon dioxide aluminium oxide and ferric oxide were 51.53% which was rated in class C. The bulk densities of CPC series between PFA10 (C) and PFA5AgSWNT0.01 (G) cured 56-day distilled water were an increased 38%. Then the highest specific electrical resistivity of CPC series PFA5OSWNT0.03 (F) cured 56-day distilled water was 1.14±0.31 mega-ohm.mm. The highest compressive strength of CPC series PFA5AgSWNT0.01 (G) cured at 28-day distilled water was 25.45±2.00 MPa compared with the OPC (A) was an increased 5%. Which the bulk densities of CPC series between PFA10 (C) and PFA5AgSWNT0.01 (G) were statistical analyzed the mostly cured at significant difference α = 0.05. In addition CPC series PFA5AgSWNT0.01 (G) mainly contained calcite portlandite quartz dolomite and ettringite were caused increasing compressive strength. And the SEM microphotograph were also displayed the calcium silicate hydrate portlandite and ettringite. Consequently the PFA was used to ability pozzolanic material using for lightweight concrete of CPC.

Properties of pumice aggregate mortar blended with para rubber wood fly ash (PRWFA) replaced type 1 ordinary Portland cement (OPC) in different proportions of 020 and 40 wt.% OPC and dosed with used engine oil (UEO) in proportions of 00.2 and 0.3 wt% water were investigated. Whole mix type specimens size was cast in 555 cm and curing in ambient temperature for 7 and 28 days. Testing series of physico-mechanical properties performed on bulk density water absorption electrical resistivity Shore hardness and compressive strength were determined. Moreover microstructure via scanning electron microscope was analyzed. Effect of curing ages enhanced properties of samples such as electrical resistivity Shore hardness and compressive strength. Particularly the 28-day specimen that contained 20wt.% PRWFA and 0.2wt.% UEO provided bulk density of 1.61 g/cm3 and highest compressive strength of 22.09 MPa.