This research aims to study the Mirai Botnet working process which made high bandwidth impacted to Internet system. From 90000 clients of Deutsche Telekom cannot access to Internet that overall bandwidth growth nearly 1 TB per second in the history DDoS attacking behavior. As Mirai exaggerated attacking to ISPs and may be involved UniNet as a big umbrella which RMUTP network interconnected as well. The author would like to study in depth to several weak points of the end devices or IoT on Internet. In the Mirai code used the IoT devices such as the Internet cameras the CPUs based on ARM ARM7 Motorola 6800 SPC PowerPC X86 and SuperH (SH4). As the results of valuable attacking code studied based-on IPV4 attack without IPV6. The source code has more than 5500 lines with 16 files and 138 functions included 62 set of user accounts and passwords. Usage the 9 flooding techniques for port attacking via 22 23 and 80 with the IP scanning exceptions for DoD IANA GE and HP IP addresses. The Internet camera devices have to disable 22 23 and 80 ports or doing suitable usability techniques to manage for several flooding protection from system harmfully.

This research aims to study the website link analysis of Faculty of Engineering RMUTP both of the internal link or the external link via the HTTP standard response code of all 9 under graduate departments web pages. From reasons of the web developers create and modify some part of content such as to include more the pieces of information or to exclude its. The website data collection period started from February 2018 to May 2018 via several directory paths or link-paths and the author found 404 (Not Found) most often than 405 (Method Not Allowed) and 504 (Gateway Timeout) in order on average 78 percent. Totally the links into and out of the engineering faculty website approximately 7500 connections.

This continued 2nd year researchaims to study the development of the para rubber press machine with wrought pattern for continued 2nd-year. Used natural para rubber mixed in a Ta-kuong by normally practical para rubber farmer style to evaluate the rubber press machine. A machine consists of the 11 roller sets in vertical pathway with press sticks on top. The components are as follows: a water press roller with a slope surface to reduce the diameter around 1-1.5 mm from a center the 3-pair sets of normal press rollers and the 2 duo sets of wrought pattern rubber press rollers with the induction motor at 1430 rpm. The rotating transmission based on belts and chains with a . The evaluated results produced the dried para rubber sheets thickness at 3.79 mm on average as the 2nd rubber sheet type standardin marketing need. From a top tray a farmer can put a sticky para rubber piece to a roller press machine easier than normal just 5.9 second on average with lower hand power to handler of the rubber pieces. In finally the wrought patternrubber sheets by a worker to carry the ta-kuong to a top tray of a rubber press machine and a rubber press man to put the para rubber pieces to a machine thus the completed 186 wrought rubber sheets per hour on average.

The research aims to study and develop the Kaolinite mixed with cement powder for the mass wall. The Kaolinite development process to improve the characteristics. The Kaolinite mixed ratios are 10% 20% 30% and 40% and the result indicated that the experiment mortar-mix ratio at 0:8:2.75:0.2:0.05:0.04:0.5 of cement powder sand Kaolinite limestone superplasticised and clean water compared to No MK control sample covered ASTM standard in tensile strength more than 100 ksc compressive strength of MK20% with superplasticised at 434 ksc. The water absorption values under the standard passed

This research aims to develop the gypsum refractory board mixed with corn leaf coir. The 5 ratios of gypsum plaster: corn leaf coir: tap water: sodium silicate are equal to 1: 0: 1: 0.03 1: 0.100: 1: 0.03 1: 0.150: 1: 0.03 1: 0.200: 1: 0.03 1: 0.250: 1: 0.03 และ 1: 0.300: 1: 0.03 by weighted. The gypsum refractory boards were produce by casting in normal temperature (30 – 35 degree of Celsius). The properties testing of gypsum refractory board mixed with corn leaf coir followed the TIS 219-2009 standard (gypsum plasterboard) included: breaking load nail pull resistance deflection water absorption density and thermal conductivity coefficient. From the results 1: 150: 1: 0.03 is the most suitable ratio of gypsum refractory board mixed with corn leaf coir. This developed gypsum refractory boards can reduce the quantity of corn leaf waste and get the good thermal insulation gypsum refractory board products.