Nowadays brake pad is a one of products that plays a role in the automotive parts industry and directly affects safety. Therefore there are many designs of brake pad for product development. The technique of reinforcing the layer in brake pads is another option for developing such products. The objectives of this research are to solve the problem of noise from brake pads using the material layer reinforcement technique and raise the quality of brake pads to use in the industrial sector. As a result the prototype brake pads with reinforcement techniques by means of damping layer were performed. Consequently the experimental work reveals that the brake pads with damping layer technique for brake pads can reduce vibration and also brake noise at the same frequency at less 10 percent at braking speeds of 50 100 and 130 km/h. Besides this technique can be applied to the production of brake pads in the same formula. However the prototype brake pads is still in the product development phase for testing in a variety of conditions both temperature factors and usage period

Brake pad is a one of products that plays a role in the automotive parts industry and directly affects safety. Therefore there are many designs of brake pads for product development. This research aims to study the thermal conductivity of brake pads and define the thermal conductivity that appropriate to brake pads and also solve the problem of deterioration of braking automotive parts. To achieve this the 3 different ingredient brake pads from Compact International (1994) Co. Ltd. are studied in terms of the heat transfer behavior. The experimental work was set by simulating a brake on the single dynamometer at the braking speed of 50 100 and 130 km/h. As a results the significant parameters are copper and fillers respectively. It affects the heat transfer behavior by means of applying heat from the contact area between the brake pad and the brake disc to the caliper This knowledge will be used in the design of brake pad ingredients to determine the appropriate conductivity of the brake pads.

Brake system is used the friction between disk and pads. In the driving conditions the brake behavior from the driver is difference. Based on this reason the damage on disk and pads are occurring. Nowadays the ratio of compound materials in pads is several and involved automotive industry has not available enough to experiment. Thus it is difficult to brake pads damaged analyzing in several driving conditions. In this problem the mechanical property tester is main tool for experimenting. And test procedure based on the Brake lining and disc brake pads compressibility JIS D 4413 [7]. The experiment emphasizes on the flexibility behavior and internal energy by volume with 3 types of brake lining and pads. For the experiment focused on conditions by normal apply brake repeat apply brake and suddenly apply brake. The results revealed the normal apply brake condition the maximum and minimum of flexibility behavior was appeared on brake lining and pads type A and type C with testing temperature at 2000C. By the repeat and suddenly apply brake conditions the brake lining and pads type C and type A with 300C is given to the maximum and minimum flexibility behavior. In case of internal energy by volume the maximum and minimum energy was appeared on pads type C and B at the 300C of testing temperature. For the testing temperature at 200 and 4000C the pads type A and type B were got the maximum and minimum energy respectively. On the other hand at the high flexibility behavior is given to high internal energy at the high temperature of the apply brake condition.

Nowadays the automotive industry in Thailand has been widely growing. Brake pad is one of the automotive products that play a vital role in automotive industry because it is the most critical seeurity part. Consequently testing products for quality are extremely requested. However the precise equipment and function tests which show the real effects are not available enough and cost a lot. Therefore they cannot response to the deman in the automotive industry development. In this study the frictional test jigs for friction measurement JIS K7125 [5] and the clutch facings for automobiles JIS D4311 [6]. A study of the frictional test emphasizes on the static friction (μs) and kinetic friction (μk) in different condition. There are 3 specimens of brake pad supposted by the industry company. These specimens were tested and the results from the pin-ondisk and those from the friction testing were compared. The results revealed the correspondence of the two-sided results but the pin-on-disk’s friction coefficient is more than the friction testing’s friction coefficient by 19.56%. Moreover the coefficient of friction varies according to the temperature Besides the static friction (μs) is likely more than kinetic friction (μk) and tends to differ considerably under high pressure condition.

Nowadays one of the automotive engineering is conductivity of brake pads playing a role in friction coefficient which means safety of customer. Thus thermal properties have been improved using composited materials. This project aims to study the conductivity behavior of 3 different brake pads which are supported by the company Compact International (1994) Ltd. For experimental works temperature based on brake condition was simulated from 200 to 400°C and cooled down from 400 to 200°C at 1 5 and 8 MPa of pressure respectively. By standard JIS D4413 testing condition of pressure was referred. The non-linear of conductivity value are calculated from the temperature under steady state condition. As a result of testing there are several of parameters effecting on the non-linear conductivity value. The brake pad that is a mix of high-fiber occurs the fluctuation of thermal conductivity. At the same time lubricant in the brake pad cause the stability of conductivity value in different temperature range at the same pressure. On the other hand the brake pad mixed hi-copper inspires the narrow range of conductivity value in different pressures at the same temperature. Moreover the conductivity value as a mention is inversely proportion with the coefficient of kinetic friction.