Quality control of dyeing and finishing of Water Hyacinth yarns and their transformed materials for commercial was a main objective to establish the dye database of synthetic dye and natural dye. The dye database was a data for quality control in dyeing process of raw material as Water Hyacinth yarns also it resolved the un-repeatability dyeing problem. Reactive dye was used for synthetic dye database creation on dry Water Hyacinth yarns at 80oC for 30 minutes. Red as Hicion Red He-3B yellow as Hicion Yellow HE-4RN Blue as Hicion Navy Blue HER 150% and black as Hifix Black KNN were the represent synthetic dye and Sodim sulphate 20 g/l and sodium carbo nate 20 g/l were used as auxiliaries. The other hands the natural dye database was forming from Ebony tree Caesalpinia sappan and Turmeric. They were dye on dry Water Hyacinth yarns at 80oC for 30 minutes and Sodim sulphate 20 g/l was the auxiliary. Whereas Butterfly pea were dye at 80oC for 30 minutes by Sodim sulphate 20 g/l and sodium carbonate 20 g/l were the auxiliaries. The whole dye database was defined the totally in Primary Secondary and ternary dye cycle. The transfer knowledge was distributed to the enterprise at Nakhon Prathom Provincd as “Chumchonjaksanpaktobchawha Bann klongnokkratum”. The topics were “How to establish the synthetic and natural dye database” “Water repel lent finishing” and “developed and transformed the Water Hyacinth to products”. The target group was very satisfied in this topic as 4.39. In the result the proportion between economic and social factor by the income increasing in 1 year was 5.04. So the research project was achievement.

This research had an aim for studying the printing process of LACCIFER LACCA KERR. (LAC) on cotton and polyester fabric. The Lac dye was extracted by using Sodium hypochlorite solution Sodium hydroxide Hydrogen peroxide and diethyl ether then Acetic acid was used for dye sedimentation. Thenthe printing condition and color fastness to washing crocking and light were examined. The efficiency of solution for extraction process were found Diethyl ether > Sodium hypochlorite solution > Sodium hydroxide > Hydrogen peroxide respectively. The hot air was suitable fixation process for cotton and polyester printing. The cotton fixation was 150oC for 5 minutes it is 11.87 in color strength. And the polyester fabric was fixed at 220oC for 3 minutes the 8.27 color strength was shown. The both of cotton and polyester were printed with Lac dye had the good color fastness to crocking and light and moderate in washing fastness. This study can apply the Lac dye on cotton and polyester fabric by a printing technique without mordanting. Then it can reduce some chemicals in the textile printing industry. This process can applied and transfer for small enterprise for Lac value added appication.

This research uses quantitative research regulations for its purpose of 1) To study the trend of Potential development and career development in textiles and fashion . 2) The development of short-term courses in textiles and fashion it is suitable for the needs of entrepreneurs and the general public. 3) To guide for organizing short-term courses effective in textiles and fashion for making money to the university. Is focusing on the development of short-term course of textiles industry and fashion. There are 2 sample groups Such as entrepreneurs and workers in textiles and fashion industry. The instrument used in the study are questionnaires requirements for the development of textiles industrial and fashion personnel. The aim for study is respondents information training needs to develop the potential of textiles and fashion personnel and the factors influencing the selection of the service short-term course.