Moisture content has a marked influence on all aspects of paddy and rice quality. These issues also have significantly importance for rice industry and economy of Thailand. Many drying process such as spouted bed technique and fluidized bed technique are extremely studied in terms of instrument design and energy consumption. However these drying processes were not suitable for high economic rice. Because of these processes performed highly damaged kernels during drying process. The objective of this project we proposed the alternative drying system that perform low damaged paddy kernels. We also were design and fabrication drying system for paddy in terms of conveyer pipe. This machine have the performance including feed rate approximately 22.83 kg/hr. drying temperature 30-120ºC air velocity 0-1.5 m/s drying time 14.64-16.91 min and energy consumption 6.02 baht/hr. We improved our machine by drying the RD41 paddy at moisture content 28 (%w.b.). We also setup drying temperatures 40°C 45°C 50°C 55°C and 60°C with air velocities 0.7m/s 1.0m/s and 1.5m/s. We found that all drying temperatures have the final moisture content lower than 15 (%w.b.) and percentage of complete paddy after drying (HRY-paddy) more than 96%. For the kernels quality we found that HRY-Brown rice tend to increase with drying temperature increased. We also found that HRY-Unbroken kernels for polishing tend to decrease between drying temperature 40°C - 50°C for air velocities 0.7m/s and 1.5m/s. Therefore these results obtained can be such a high potential approach that can be used for further developing into rice economy and industry of Thailand.

This research aims to study the using oil palm fiber to develop ceiling board product. The mixture ratios of Gypsum plaster: oil palm fiber: tap water: catalyst are 1 : 0.15 : 1: 0.03 1 : 0.20 : 1: 0.03 1 : 0.25 : 1: 0.03 1 : 0.30: 1: 0.03 and 1 : 0.35 : 1: 0.03 by weight. The ceiling board samples are cast in 30 x 30 x 1 centimeter in dimension. The ceiling board sample testing follows the TIS 219-2552. The results show that the longitudinal and lateral breaking load Nail pull resistance density and thermal conductivity of ceiling board with high quantity of oil palm fiber are lower than ceiling board with low quantity of oil palm fiber while that the deflection and water absorption of ceiling board with high quantity of oil palm fiber are higher. However all of oil palm fiber samples with lower than 0.2 of ratio can pass the standard.