The aim of this research is to create the center of mass testing machine for vehicles with maximum mass 3000 kilograms. By the performance of this machine is able to determine the center of mass 3 axis by horizontal longitudinal and vertical. On the other hand the verities of mass from 50 to 100 kilograms and the several of weight distribution at horizontal and longitudinal are applied to the condition of testing for reasonable to the position of the center of mass. The result of research discovered to the performance of center of mass tester was activated following to test conditions. Furthermore the weight distribution at longitudinal was the highest effect to the horizontal center of mass. By the way the value of weight distribution at horizontal is more effects to the longitudinal center of mass. Moreover increasing of mass was impact to the vertical center of mass and it’s independent to the position of weight distribution.

The aim of this research is to study the brake proportional affected to vehicle stability. Braking performance and vehicle stability testing are the main of research purposes. Otherwise learning research center and new researcher in automotive engineering are the minor research objectives. The results of research discovered to the braking performance depend on driver behavior. By the minimum deceleration was appeared on the non-proportion in front axle with braking ratio 0:100. In term of vehicle stabilities yaw and pitch moment are normally occur by the driving behavior. But the sideslip is an absolutely effect to vehicle handling. With the braking ratio 100:0 there is the highest risk for controlling a vehicle cause of the wheels were locked-up condition in the rear axle. Therefore the value of the sideslip was exceeded with the criteria. Furthermore these project researches were got the learning research center and the new researcher in automotive engineering field.