The objectives of this research are to study the production to find the proper ratio to test the properties to suggest the implementation and to transfer the technology of high strength milk carton waste artificial wood mixed with poly ethylene terephthalate (PET) plastic waste. The ratios of this artificial wood included milk carton waste: PET plastic waste equal to 80:20 75:25 70:30 65:35 and 60:40 by weight. The milk carton and PET plastic wastes were grinded though sieve no.4. The artificial woods were casted by hot compression with 180 degree of Celsius for 5 minutes. The samples tested follow the TIS.966-2547 standard. From the results the 60:40 of ratio was the proper ratio which can pass the standard. The increasing of PET waste effected to decrease the density moisture and swelling of properties. In case of bending strength elastic modulus and tensile strength perpendicular to surface the increasing of PET effected to decrease their properties. The developed artificial wood mixed with milk cotton waste and PET plastic waste has the possibility to implement in decoration and construction both interior and exterior wall building. These results can register the petty patent and write the research paper which to transfer the technology.

This research aims to study the using cassava pit wastes mixed with cement to particle board walls. The Portland cement type1: fine sand: tap water ratio is equal to 1: 0.5: 0.416 by weight. The ratios of cassava pit wastes to cement are used following: 0.05 0.06 0.07 0.08 0.09 and 0.10 by weight. The cassava pit wastes are crushed by plastic plastics granulators (pass sieve no.4). The casting of particle board walls use the compression machine in room temperature (30 – 35 degree of Celsius) and control 0.75 g/cm3 of density. The TIS 878-2537 standard (cement bonded particle board: high density) is followed to test the properties of particle board wall. Resulting the cassava pit wastes mixed with cement can cast to particle board walls and have good properties especially the thermal insulation property.