The objective of this work was to study the adsorption efficiency of bamboo and its surface modified with manganese oxide for removal of Pb(II) ion. The adsorption of Pb(II) from aqueous solution onto bamboo (BB) and manganese oxide-modified bamboo powder (MnO-BB) was evaluated based on batch experiment. The adsorption efficiency of MnO-BB onto Pb(II) was investigated as a function of the initial pH of 6 equilibrium time of 30 min adsorbent concentration of 5 g/L and initial concentration of Pb(II) solution in the range of 50-500 mg/L. The adsorption isotherms of Langmuir Freundlich and Dubinin-Radushkevich were used to describe the equilibrium isotherm. It is observed that the data from MnO-BB adsorbents fitted well to the Langmuir isotherm. The maximum monolayer adsorption capacities of MnO-NC were estimated as 38.76 mg/g. By comparing with BB the amount of Pb(II) adsorbed onto MnO-BB was more than BB by about 40 times under the optimized adsorption condition. According to Dubinin-Radushkevich isotherm the adsorptive mechanism of Pb(II) onto MnO-BB was chemisorption. The kinetic studies of Pb(II) demonstrated that the adsorption of Pb(II) onto MnO-BB adsorbent followed a pseudo second-order model with a good correlation. The adsorption mechanism was processed via chemical ion exchange between H+ and bonded MnO groups and Pb(II) ions in solution

The objective of this work was to study the adsorption efficiency of natural clay and its surface modified with manganese oxide for removal of Pb( II) ion. The adsorption of Pb( II) from aqueous solution onto raw natural clay (NC) and manganese oxide-modified natural clay (MnO-NC) was evaluated based on batch experiment. The adsorption efficiency of MnO-NC onto Pb( II) was investigated as a function of the initial pH of 6 equilibrium time of 30 min adsorbent concentration of 5 g/L and initial concentration of Pb(II) solution in the range of 50- 500 mg/L. The adsorption isotherms of Langmuir Freundlich and Dubinin-Radushkevich were used to describe the equilibrium isotherm. It is observed that the data from MnO-NC adsorbents fitted well to the Langmuir isotherm. The maximum monolayer adsorption capacities of MnO-NC were estimated as 38. 76 mg/ g. By comparing with NC the amount of Pb( II) adsorbed onto MnO-NC was more than NC by about 38 times under the optimized adsorption condition. According to Dubinin-Radushkevich isotherm the adsorptive mechanism of Pb(II) onto MnO-NC was chemisorption whereas the NC showed the mechanism as physical in nature. The kinetic studies of Pb( II) demonstrated that the adsorption of Pb( II) onto MnO- NC and NC adsorbents followed a pseudo second- order model with a good correlation. The adsorption mechanism was processed via chemical ion exchange between H+ and bonded MnO groups and Pb(II) ions in solution.

In this study autoclaved aerated concrete (ACC) were investigated as low-cost andsimple adsorbents for removal of Pb(II) from aqueous solution. The adsorption of Pb(II) wascarried out by batch experiments as a function of solution pH adsorbent dosage contacttime initial Pb(II) concentration and temperature. The experimental data were analyzed bythe Langmuir Freundlich Temkin and D-R isotherm models. The Langmuir isotherm modelis more suitable. The monolayer adsorption capacity of ACC was found to be 3.99 mg g−1.The adsorption of Pb(II) onto ACC was physical in nature. The kinetic studies of Pb(II)demonstrated that the adsorption of Pb(II) onto ACC adsorbents followed a pseudosecond-order model with a good correlation.

ไม่ปรากฏบทคัดย่อ

The purpose of this research is to study the heavy metal removal from wastewater from laboratory by using adsorption process with firebricks. Waste water was collected among three courses of laboratory such as analytical chemistry principle chemistry and chemistry for engineers. The optimized absorption efficiencies of multi-elements with stirring time volume ratio and temperature were 2 hours 10 g/100 mL and room temperature respectively. It was found that absorption efficiencies of lead (Pb) copper (Cu) zinc (Zn) chromium (Cr) were 65.1 54.8 63.4% and ND respectively.