The dyeing industry both of business size and household size where the remaining water from the dyeing process is dumped into pipes and flows into natural water sources causing sewage problems. Therefore a column type wastewater treatment system has been developed by using a filtration system along with an adsorption system. The materials used to treat the wastewater from dyeing are gravel sand charcoal from wood and activated carbon from coconut shell. The study was conducted on the synthesis activated carbon from coconut shell using for color and molecules adsorption. The amount of activated carbon from coconut shell was varied at 200 400 600 and 800 g applying with filter media and other adsorption materials taking 1 hour to treat the wastewater from dyeing. The parameter using to measure water quality consisted of color value pH suspended solids conductivity turbidity value COD and TKN to indicate the water quality before and after treatment evaluating the efficiency of the wastewater treatment system. The best ratio that can treat the color is the formula containing 800 g of coconut shell activated carbon. It was able to treat the color equal to 5.94 SU or 99.43 percent compared to the wastewater before treatment.

This research aims to produce activated carbon from molasses via a chemical activation process with potassium hydroxide (KOH) and a microwave heating process which consumes less energy and provides more rapid and uniform heat distribution than a conventional heating. The obtained activated carbon was then characterized with BET SEM and FTIR. It exhibited a large specific surface area of 1631 m2/g and a total pore volume of 1.124 cm3/g consisting of mesopore and micropore. In addition the active functional groups were also found on the surface of the activated carbon. Thus it was brought for the adsorption test with methylene blue. It was found that the adsorption capacity of the activated carbon increased with time and reached the equilibrium within 8 hours. The adsorption data of the activated carbon were corresponded to Langmuir isotherm with the highest adsorption capacity of 370.37 mg/g. The adsorption kinetic of the activated carbon exhibited pseudo-second order reaction suggesting to the chemisorption phenomenon. From the thermodynamic study it revealed that the adsorption process were endothermic and spontaneous reactions.

The purpose of research is to study the carbon footprint evaluation of products for thread turned Tungsten Carbide 16ER60 of production. To assess amount of greenhouse gas emissions that affect the environment. The key component in the calculation include raw material production material energy and waste January 2018 and March 2019. The scope of the study is the assessment of Business-to-Business (B2B). From the assessment of the carbon footprint it was total of greenhouse gas was about 1.1559 Kg CO2e which was divided from raw material about 0.0118 Kg CO2e and production process about 1.1441 Kg CO2e. From the improvement reducing electricity of sintering furnaces machine and lighting system was reduce greenhouse gas emissions about 0.3249 Kg CO2e or decrease percent 71.88 CT

Deterioration of reinforced concrete deep beam structure caused by chloride is severe andtakes up wide area even though the structure is not exposed to sea water or brackish water. Even the structure which is far from sea water or brackish water is affected by this problem.When the reinforced concreate deep beam structure is affected by chloride steel reinforced inside the structure is corroded resulting in reducing the cross-sectional area of the reinforced steel affecting load capacity deflection and beam failure. If there is no repair or strengthening such capabilities are continuously reduced until it is no longer safe to use the beam. Therefore it is necessary to repair or strengthening the deteriorated structure to be safely used. This research investigated strengthening of deteriorated reinforced concrete deep beam caused by chloride with 4 formats of carbon Fiber sheets to seek guidelines for the most efficient strengthening. The resultshowed that the strengthening by the 4 format of carbon fiber sheet could increase ultimate loadcapability yet could not improve ductility of the deteriorated beam to become close to the beamthat is not deteriorated. The strengthening that could increase the maximum ultimate load capability was the table format strengthening. In addition the strengthening that the carbon fiber making 45 degrees with the length of the beam could best prevent diagonal cracks.

Dyes contaminated in wastewater that negatively affecting the environment and human health. The objectives of this study to prepare activated carbon from Salacca zalacca (Sumalee) seeds activated by 36 mmol/g KOH dye solution and activated carbon ratio 20:32 ml/g for dye removal. The influents of dye removal from wastewater by Salacca zalacca (Sumalee) seeds activated carbon were investigated as initial dye concentration activated carbon and dye solution ratio and contraction time. The moisture content the iodine number the methylene blue index and the functional groups by FTIR technique of the Salacca zalacca (Sumalee) activated carbon were characterized and the kinetics adsorption were also analyzed. The results showed that the activated carbon was the microporous material the highest dye removal from wastewater was 7.50 ± 0.25 mg/g the equilibrium time was 150 min with the activated carbon to dye solution ratio of 1:500 g/ml for 200 mg/l initial concentration. The kinetics of the adsorption process can be described by a pseudo-second order model (R2 = 0.9999). When increasing the initial concentration of dyes the adsorption efficiency was increased. The amount of activated carbon increased resulting in lower adsorption efficiency and the equilibrium time was longer