his research work aimed to study the effects of the addition of sisal fiber and surface treatment by epoxy silane on the physical and thermal properties of polylactic acid (PLA). Specimens of PLA and unidirectional fiber-reinforced composite were processed by a compression molding machine and evaluated the physical and thermal properties by water absorption measurement and differential scanning calorimetry (DSC) analysis respectively. The result showed that water absorption tended to increase by adding sisal fiber whereas surface treatment of sisal fiber by epoxy silane improved water resistance of composites. The water absorption values at immersion time of 5 days were 0.89 1.13 and 1.26 % for PLA PLA/treated sisal fiber composite and PLA/untreated sisal fiber composite respectively. For thermal properties the addition of sisal fiber led to decreases in glass transition temperature and crystallinity. These were because the presence of continuous fiber might interfere with the crystallization of PLA. The surface treatment of continuous fiber with epoxy silane led to difficult crystallization. The good interfacial adhesion interrupted PLA alignment.

This is the study of a conductive sheath-core bicomponent fibers. The intentions of the experiments were to investigate feasibility of conductive sheath-core bicomponent fiber forming using selected materials and the fibers’ properties. The trails were to extrude the bicomponent fibers with conductive materials in sheath section and supporting materials in core section. The conductive carbon black was selected as conductive material to compound with polypropylene. The virgin polypropylene was chosen as core material in the fibers. It was problematic to form fibers using the conductive carbon black polypropylene compound alone therefore the virgin polypropylene was used as the core section in the fibers to promote production stability. The sheath-core carbon black compound bicomponent fibers were steadily produced with designated machine settings. The produced fibers were tested for their physical and mechanical properties and electrical conductivity. The results shows that the fibers with the carbon black polypropylene compound as the fibers’ sheath section and the virgin polypropylene as the fibers’ core section have conductive property. The conductivity of the fibers increased when their sheath sections were thicker as the ratio of the carbon black compound become higher. Even though thicker sheath section of the fibers (40% and over) have higher conductivity the physical properties of the fibers become weaken and less applicable as textile fibers.

The objectives of this research were to study cellulose fiber extraction from rice straw with sodium hydroxide in various conditions (with 5 1 0 and 1 0 % of sodium hydroxide at room temperature 60ºC and 90 ºC for 0.5 1 2 and 3 hours) and to study rice straw nonwovens preparation by the wet-laid process. Oil wicking ability oil absorption ability air permeability morphology and physical properties of prepared nonwovens were investigated. It was found that the optimal condition for cellulose fiber extraction from rice straw was 5% of sodium hydroxide at 90 ºC for 2 hours. At this condition the cellulose fiber yield of 2 2% and the fiber length of 1 . 9 6 cm were obtained. The oil wicking ability and oil absorption ability of rice straw nonwovens increased when weight per unit area increased. Therefore oil absorbed into gaps between fibers of the nonwovens by capillary effect. Moreover the nonwovens could wick and absorb virgin palm oil better than fried palm oil because virgin palm oil has a lower viscosity than fried palm oil. The viscosity increased from derived lipid and other substances which dissolve and disperse increasing after frying food. The results indicated that the rice straw nonwovens had oil absorption ability.

This research was resulted of the characterization of cement paste composites (CPC) blended with palmyra fiber ash and surface-treated on short SWNT prepared by an electroless plating process. The cement paste composites included cement 270 meshes of palmyra fiber ash and short SWNT. The design of experiment was divided into 3 conditions namely uncuring 28 and 56 days in distilled water. The properties of CPC were carried out in chemical composition physical mechanical mineral phase microstructure and statistical analysis. It was found that in the chemical compositions an amount of silicon dioxide aluminium oxide and ferric oxide were 51.53% which was rated in class C. The bulk densities of CPC series between PFA10 (C) and PFA5AgSWNT0.01 (G) cured 56-day distilled water were an increased 38%. Then the highest specific electrical resistivity of CPC series PFA5OSWNT0.03 (F) cured 56-day distilled water was 1.14±0.31 mega-ohm.mm. The highest compressive strength of CPC series PFA5AgSWNT0.01 (G) cured at 28-day distilled water was 25.45±2.00 MPa compared with the OPC (A) was an increased 5%. Which the bulk densities of CPC series between PFA10 (C) and PFA5AgSWNT0.01 (G) were statistical analyzed the mostly cured at significant difference α = 0.05. In addition CPC series PFA5AgSWNT0.01 (G) mainly contained calcite portlandite quartz dolomite and ettringite were caused increasing compressive strength. And the SEM microphotograph were also displayed the calcium silicate hydrate portlandite and ettringite. Consequently the PFA was used to ability pozzolanic material using for lightweight concrete of CPC.

Research on this It is a quasi-experimental research. The objectives 1) to study the current weaving patterns and techniques about product processing with the participation of communities in Nakhon Nayok and Chanthaburi 2) to extract fibers from reeds tree 3) to design weave patterns in reed fibers 4) to create new weaving patterns in reed fibers 5) to dye the reed fibers 6) to carry out weaving of fabrics according to different patterns 7) to create products from weaving patterns from reed fabrics for commercial purpose 8) to examine the performance of reed fabric and reed fiber processing products 9) to improve and develop the defect product processing in order to meet the standards and market demands. the research team began training to extract fibers from reed fibers designing on fabric product processing and reed fiber products processing with have an interview observe and create a research evaluation tool. The results were obtained for statistical and qualitative analysis and summarize the results of research. Population and sample groups used in this study were people interested in weaving The sample of 75 people was obtained by simple randomness. The study method used to collect data by constructing a satisfaction survey questionnaire The research found that people in two provinces the community of Bang Sa Kao Sub-district Laem Sing Chanthaburi and the community of Kaem Khong and Lam Bua Loi Sub-district Pak Phli Nakhon Nayok 1) can take a training weaving course from reed fibers in practice able to extract fibers from papyrus and designed more than 10 beautiful weaving patterns from reed fibers the satisfaction was at a high level. 2) the group of people was able to weave fabrics from reed fibers with the technique of using yarn from reed fibers as weft yarn and uses artificial fibers real silk and cotton as yarns will make the fabric not broken while weaving and having dense fabric with a high level of satisfaction 3) able to dye the reed fibers from natural materials such as indigo shellac jackfruit coconut shell etc. 4) can weave the fabric according to the pattern more than 15 beautifully designed weaves and 5) can be transformed into a beautiful reed fabric product such as the handbag womens bag in various forms to meet the needs of the community shoes and household appliances as well as bringing the results of product testing to develop to be even more standardized in order to develop and the branding design of the product in the future.