The objective of this research was to determine and estimate the quality of ground water for producing village-tap water without pre-treatment in 3 districts Samchuk Nongyasai and Dermbangnangbuat districts Suphanburi province. Villagetap water was collected from 88 boreholes covered 17 sub-districts in June 2014 and January 2015 using standard method and then correctly preserved before analysis process. The result showed that pH conducted in filed using pH meter found in the range 7.0 to 9.2. Total hardness was found in the range of 110 to 590 mg/L as CaCO3. The concentration of Mn Fe Pb was found in the range of 0.08 - 0.88 mg/L nd - 1.88 mg/L and nd - 0.07 mg/L respectively. The concentration of Cd was to be non-detectable for all samples. The result found that total hardness was found higher value than standard quality water according to publish by Ministry of Natural Resources and Environment Thailand. The contamination of Mn and Fe in some samples was higher value than maximum allowable concentration. The problem of Fecontamination can extremely affect to physical properties of quality water. The production of household-water filtration in this work was modified from Bureau of Community Technology Department of Science Service Ministry of Science and Technology. The technology communication of the production household-water filtration was conducted by workshop procedure. The production household-water filtration was conducted step-by-step. All participants can produce the household-water filtration by themselves.

This research studied the efficiencies of ceramic membrane filtration from industrial asphalt for dyeing wastewater treatment by forming a ceramic membrane in a diameter of 6 cm height of 2 cm. An appropriate proportion of industrial ashes: kaolin: sodium hydroxide solution mixed with sodium silicate solution was 46:18:36 at 800 ° C. For the properties analysis of ceramic membrane made from industrial ashes found that a shrinkage value compression resistance and density water absorption value and permeate flux were found 3 percents 0.6 Kilonewtons per cubic centimeter and 1.93 grams per cubic centimeter 45 percents 8.61 milliliters per square centimeter per minute respectively. Structural surface by a scanning electron microscopy was found that the porous inside of material was closely aligned together. Moreover precipitation of synthetic wastewater by using industrial ashes could help to increase the efficiencies of dyeing wastewater treatment. From the experiment it was found that the precipitation of synthetic wastewater with industrial ash was 94 percent filtration efficiency. On the other hand the efficiencies of synthetic wastewater treatment without precipitating of industrial ashes found only 69 percent. Moreover this research offers a new option for industrial wastes utilization.